Toshiba Carrier RBC-AX22CUL Bedienungsanleitung

TOSHIBA

Carrier

REMOTE CONTROLLER FOR AIR CONDITIONER (SPLITTYPE)

Owner's Manual

Remote Controller

Model name-

Wireless remote controller kit

BC-AX22CUL

Generic Wireless remote controller

model name and signal receiving unit

RBC-AX22CUL WX-TA01 UES

(Wireless remote controller model name)

TOSHIBA

(_arrler

Wireless remote controller

(WX-TA01UES)

• ®

Signal receiving unit

Owner's Manual

Remote controller for air conditioner (Split type)

Manuel du Proprietaire

Tel6commande pour climatiseur (Type split)

Wireless remote controller kit Owner's Manual

Thank you very much for purchasing TOSHIBA/Carrier Remote Controller for Air Conditioner.

Please read the owner's manual carefully before using your Remote Controller for Air Conditioner.

•Be sure to obtain the "Owner's manual" and "Installation manual" from constructor (or dealer).

Request to constructor or dealer

Please clearly explain the contents of the Owner's manual and hand over it.

CONTENTS

PRECAUTIONS FOR SAFETY ............................................................... 2

PART NAMES AND FUNCTIONS ........................................................... 3

HOWTO OPERATE INDOOR UNIT ........................................................ 7

HOW TO OPERATE TH E TIMER ............................................................. 8

HOWTO ADJUST AIR DIRECTION ........................................................ 9

SLIDE SWITCH ..................................................................................... 10

HOWTO INSERTTHE BATTERIES ...................................................... 10

HOWTO HANDLE THE REMOTE CONTROLLER ............................... 11

HOWTO USE THE REMOTE CONTROLLER CORRECTLY ................ 11

ADDRESS ............................................................................................. 12

HOWTO PERFORM EMERGENCY OPERATION ................................ 13

BEFORE ASKING REPAIR WORK ....................................................... 14

English-1 1

Wirelessremotecontrollerkit Owner'sManual

1PRECAUTIONS FOR SAFETY

/_ WARNING

WARNINGS ABOUT INSTALLATION

•Make sure to ask the qualified installation professional in electric

work to install the remote controller.

If the remote controller is inappropriate installed by yourself, it may

cause, electric shock, fire, and so on.

• Make sure to install the air conditioner specified by TOSHIBA/Carrier

and ask the exclusive dealer when installing.

If the air conditioner is installed by yourself, it may cause electric

shock or fire, etc.

WARNINGS ABOUT OPERATION

• Prevent any liquid from falling into the remote controller.

Do not spill juice, water or any kind of liquid.

It may cause machine failure, electric shock or fire, etc.

• When you are aware of something abnormal with the air conditioner

(smells like something etc.), immediately turn off the main power

supply switch or circuit breaker, from the mains to stop the air

conditioner, and make contact with the dealer.

If the air conditioner is continuously operated with something

abnormal, it may cause machine failure, electric shock, fire, and so on.

WARNINGS ABOUT MOVEMENT AND REPAIR

• Do not repair any unit by yourself.

• Whenever the air conditioner needs repair, make sure to ask the

dealer to do it.

If it is repaired imperfectly, it may cause electric shock or fire.

• When reinstalling the air conditioner, contact with the dealer.

If the installation is insufficient, it may cause electric shock or fire, etc.

CAUTION

CAUTIONS ABOUT INSTALLATION

• Do not install the remote controller in a place where its signals do

not reach the indoor unit.

• Do not install the remote controller in the place under the direct

sunlight and close to any heat source. It may cause machine failure.

• The fluorescent lamp with rapid start system or inverter system may

disturb the signal reception.

For details, contact with the dealer of the air conditioner you have

purchased.

CAUTIONS ABOUT OPERATION

• Do not drop or apply strong shock to the air conditioner.

It may cause remote controller failure.

• Use batteries that meet the specifications.

2English-2

Wireless remote controller kit Owner's Manual

2PART NAMES AND FUNCTIONS

I Remote Controller (WX-TA01UES)

.Up to 8 indoor units in a group can be

controlled by one remote controller

(See page 12)

.The displayed indication on the LCD is for

explanation.

Therefore it differs from the actual fact but it.

|®'_ _ _ 12

6 17

718

10 ......J

1 Transmitting part

2ON/OFF button

Starts and stops the air conditioner

alternately.

3Mode button

Selects an operation mode.

4Fan speed button

5Timer set button

Used for timer setting. (See page 8)

6Filter button

No function

7ACL button

Used after batteries are replaced or the slide

switch is switched. (See page 10)

8Slide switch

(See page 10)

9Battery compartment

(See page 10)

10 Cover

Slide the cover downward holding its both

sides.

1 1 Remote controller sensor

Senses the ambient temperature when

the remote controller is selected with the

sensor button.

12 LCD display

Displays the air conditioner operation

mode. (This illustration shows all display

contents.)

13 AUTO louver display differs

according to the installed unit.

(See page 9)

14 Setup temperature button

Adjusts the room temperature.

Set the desired set temperature by

pushing (_) or (_ .

15 Swing/air direction button

(See page 9)

16 Address button

(See page 12)

17 Ventilation button

Use this button when a ventilation fan or

other unit which was purchased on the

market has been connected.

18 Sensor button

Selects the temperature sensor of the

remote controller.

The temperature sensor of the indoor unit

is selected by default. While the indoor

unit temperature sensor is selected, _ is

displayed on the display.

English-3 3

Wireless remote controller kit Owner's Manual

,The signal receiving unit is mounted to the ceiling panel.

it Signal Receiving Unit

,The signal receiving unit is attached to the indoor unit.

,Hereinafter, all remote controller button names are indicated with respective symbols displayed

on the remote controller.

1©

1Emergency operation button

(See 13 page.)

2Signal receiving unit

The signal sent from the remote controller

is received.

3Display lamp

One of displays flashed while a trouble

occurs. When the display lamp flashes,

refer to "Before asking of repair" in 14 page.

4(_ lamp

This lamp goes on during operation.

5Qlamp

This lamp goes on while the timer is

reserved.

6®lamp

, [n heating operation this lamp in the

following cases;

The operation has started.

The temp. controller has worked.

The unit is under defrost operation.

,This lamp flashes while a trouble occurs.

Z_ CAUTION

, If "pi, pi" sound is heard, the MODE lamp of the display lamp goes on, and the (Z) lamp and

lamp flash alternately, the operation is not performed with the desired mode.

,Even if you push _ , [] or _ when remote controller operation is disabled by the central control or

other means, "pi" is heard 5 times and the button operation is not accepted.

4English-4

Wireless remote controller kit Owner's Manual

•Display Section

All indicators are shown in the right and the lower figures

for the explanation.

Only selected contents are display in actual operation.

m5 6

--7 8

I isplay

section

Operation

section

1Transmitting indication

Displayed while operating the switches of

the remote controller.

2Mode display

The selected operation mode isdisplayed.

3Fan speed select display

The selected fan speed is displayed.

(AUTO)_,,_, (HIGH) _{_

(NED.) _{ (LOW)

4Ventilation display

This indication appears while the ventilation

fan is operating.

5Remote controller sensor display

This indication appears when the remote

controller sensor is used.

6Set up temperature display

The selected set up temp. is displayed.

7 Flap position display

8SWING display

Displayed during up/down movement of the

louver.

,9 Timer set display

Time of the timer is displayed.

10 Timer SETIN setup display

When pushing the Timer SET IN button,

the display of the timer is selected in

order of [OFF] _ _ _ _ repeat

OFF timer _ [ON] _ _ No display.

English-5 5

Wirelessremotecontrollerkit Owner'sManual

• Operation Section

Push each button to select adesired operation.

• The details of the operation needs to be set up once, afterward, the air conditioner can be used

by pushing CObutton only.

1Mode button

Selects desired operation mode.

2Fan speed button

Selects a fan speed.

3Timer set button

TIMER SET button is used when the timer

is set up. (See page 8)

4ACL button

Use this button after exchange of battery.

5Set up Temperature button

Adjusts required room temperature.

Set required set temperature by pushing

®or®

ON/OFF button

When the button is pushed, operation

starts, and it stops by pushing the button

again.

When the operation stops, the operation

lamp and all displays disappear.

Filter reset button

No function

OPTION :

Remote controller sensor

Usually the TEM_ sensor of the indoor unit

measured a temperature.

A temperature around the remote controller

can also be measured.

For details, contact the dealer from which you

have purchased the air conditioner.

6English-6

/Th

_\L-S

Wireless remote controller kit Owner's Manual

HOWTO OPERATE INDOOR UNIT

•Cool/Heat AUTO L_, Heat _,?,_, Dry 6, Cool _{_, Fan X

Power supply

Turn on the power supply switch 12 hours before starting the operation.

•After the power supply has been turned on, the operation of the remote controller is not accepted

for approx. 1 minute. It is not a failure.

(The sensor receives the signal once, but the received contents are cleared.)

1Push _. (ON/OFF button)

2Push [] (Mode button) operation to select one

of _,, _:- , (_, _, and X.

3Push _(Fan Speed button) to select one of

fan speed modes.

When selecting _, the fan speed is automatically

changed. (During FAN mode, the air speed is not

automatically changed.)

Push either (_ or (_ to select the desired temperature.

• During FAN mode, the temperature cannot be set up.

Stop

Push ON/OFF button. When using the remote controller to stop the unit, the outdoor unit fan

may keep operating for a while even if the compressor of the outdoor unit has stopped.

•In heating operation, if the room is not comfortably heated with FAN _, select FAN

#}} or#}.

Although they are displayed, the function may not be provided according to the used indoor unit.

(Fan speed is constant.)

• When the unit cannot be stopped by the normal operation

Turn off the power switch or leakage breaker, and then contact the shop which you purchased the unit.

• Automatic cool/heat

When all indoor units in the identical refrigerant system are controlled as a group, the cooling/

heating operation is automatically performed with the difference between the setup temperature

and the room temperature.

•Dry operation

• There is no dry function according to the used indoor unit even if DRY is displayed on the

display section of the remote controller. (Same to Cooling operation)

• When the room temperature approaches the setup temperature, running/stop operations are

automatically repeated.

• In order not to return humidity to the room as possible, the mode of indoor fan enters LOW

mode when the operation has stopped.

• The fan speed cannot be adjusted according to the used indoor unit or status of the room

temperature.

• The DRY mode cannot be used according to the used indoor unit when the outdoor

temperature is 59°F (15°C) or lower.

English-7

/T2

/T h

_\L-S

Wireless remote controller kit Owner's Manual

4HOWTO OPERATE THE TIMER

•After setting the timer, set the remote controller at a position where the signal can reach the signal

receiving unit (indoor unit). (The signal of the timer operation is sent from the remote controller.)

• Set up the timer during display of the operation mode.

Use in the following cases During display

To stop the air conditioner

after the previously set time I_l)_.()l

has passed

To stop the air conditioner

every time after the previously €_,_ _

set time has passed

To operate the air conditioner

after the previously set time I_-")_,I I

has passed

Timer time

Every pushing _, the setup time increases

by 0.5 hour (30 minutes).

The maximum time to be set is 72.0 hours.

Every pushing _, the setup time decreases

by 0.5 hour (30 minutes).

The minimum time to be set is 0.5 hours.

Timer display

Every pushing _, the display changes as

follows;

0 8

llill#lltt ••

_r_tr_t._-_trJ

No display

•How to use OFF timer

(Ex.) To stop the unit 30 minutes after

1When pushing the timer _once,

and the time flash on the remote

controller.

2Push TIME _ or _to set the time

to 0.5.

3Push _and the [_ go on timer.

•How to use the repeat timer

(Ex.) To stop the air conditioner every time

after 2.5 hours has passed

When pushing the timer _ twice.

_ _ and the time flash on the remote

controller.

2Push TIME _ or _'_ to set the time

to 2.5.

3Push _and the _ _ go on timer.

The OFF timer is activated and the

operation stops in 2.5 hours. When pushing

(ON/OFF) button again to operate the

unit, the operation stops after 2.5 hours.

•How to use ON timer

(Ex.) To operate the unit 8 hours after

1When pushing the timer _three

times, _and the timer flash on the

remote controller.

2Push TIME _ or _to set the time

to 8,0,

3Push I_

The operation mode display disappears,

and then time and the _ go on.

• To stop the timer operation

To stop the timer operation

Push _ button.

Then the timer display disappears.

English-8

/T2

/T h

_\L-S

Wireless remote controller kit Owner's Manual

5HOWTO ADJUST AIR DIRECTION

• Never move the louver (Air direction up/down adjusting plate) which is operated on the remote

controller with hands except a case of cleaning of the louver.

• While the unit stops, the louver (Air direction up/down adjusting plate) is closed automatically.

• During preparation of heating, the louver (Air direction up/down adjusting plate) directs upward.

The swinging operation starts after heating preparation status has been cleared.

However, swinging is displayed on the AUTO louver display of the remote controller even if the

heating operation is being prepared.

How to set up the air direction

Every pushing [- button during operation, the air direction changes.

How to start swinging

When pushing [- button, set the direction of the louver (Air direction up/down adjusting plate) to

the lowest position, and then push IT button again, the swinging is displayed and the air direction

automatically changes upward/downward.

How to stop swinging

Pushing [- button once again during swinging of the louver stops the louver at the desired position.

Then, when pushing IT button, the air direction can be set to position from the uppermost position.

• In cooling or dry operation, the louver does not stop when the louver directs downward.

If doing so, the louver stops at the 3raposition from the uppermost position.

In heating operation

Direct the louver (Air direction up/down

adjusting plate) downward, otherwise the hot air

may not reach at the foot. •

.\C

Initial setup

In cooling/dry operation

Direct the louver (Air direction up/down

adjusting plate) upward, otherwise dewdrops

may adhere or drip down to w•m_ •

near of the discharge grille. .\

Initial setup

In air blowing operation

..'\Initial setup

In swing operation

Display when swinging stopped

• • Fan/Heat operation Cool/Dry operation

English-9

/T2

Andere Handbücher für Carrier RBC-AX22CUL

Inhaltsverzeichnis

Sprachen:

Andere Toshiba Fernbedienung Handbücher

Toshiba

Toshiba ASD-MTG-KITQ9 Bedienungs- und Wartungshandbuch

Toshiba

Toshiba RBC-AX31U(W)-UL Bedienungsanleitung

Toshiba

Toshiba RBC-AX23UWW-E Bedienungsanleitung

Toshiba

Toshiba RBC-CR1-PE Bedienungsanleitung

Toshiba

Toshiba RB-RXS33-E Bedienungsanleitung

Toshiba

Toshiba RBC-AMS55E-EN Bedienungsanleitung

Toshiba

Toshiba CT-8002 Bedienungsanleitung

Toshiba

Toshiba RBC-AS41E Bedienungsanleitung

Toshiba

Toshiba RBC-AX32U(W)-E Bedienungsanleitung

Toshiba

Toshiba RBC-AMT31-E Bedienungsanleitung

Toshiba

Toshiba RBC-AX32UM(W)-E Bedienungsanleitung

Toshiba

Toshiba RBC-AS21E Bedienungsanleitung

Toshiba

Toshiba TCB-SC640U-E Bedienungsanleitung

Toshiba

Toshiba Lite-Vision plus RBC-AMS51E Bedienungsanleitung

Toshiba

Toshiba A3030D series Bedienungsanleitung

Toshiba

Toshiba RBC-AMT31-E Bedienungsanleitung

Toshiba

Toshiba RBC-AMS55E-ES Bedienungsanleitung

Toshiba

Toshiba Carrier TCB-AX21UL Bedienungsanleitung

Toshiba

Toshiba RG57A8/BGEF Bedienungsanleitung

Toshiba

Toshiba RBC-AS21E Bedienungsanleitung

Toshiba

Toshiba RBC-AS21UL Bedienungsanleitung

Toshiba

Toshiba RBC-AMSU51-ES Bedienungsanleitung

Toshiba

Toshiba XV55*D Series Bedienungsanleitung

Toshiba

Toshiba RBC-AMSU51 -ES Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung