Toshiba RBC-AX31U-UL Bedienungsanleitung

TOSH|BA

Carrier

REMOTE CONTROLLER FOR AIR CONDITIONER (SPLIT TYPE)

Owner's Manual

Remote Controller

Model name:

Wireless remote controller kit

RBC-AX31U(W)-UL

Wireless remote controller

Generic model name and signal receiving unit

RBC-AX31U(W)-UL WX-TA01UES

(Wireless remote controller

model name)

Wireless remote controller

(WX-TA01 UES)

i:%'_oO

D o*

Signal receiving

unit

Owner's Manual

Remote controller for air

conditioner (Split type) 1

Manuel du proprietaire

Telecommande pour climatiseur

(Type split) 17

Wirelessremotecontrollerkit Owner'sManual

Thank you very much for purchasing TOSHIBA/Carrier Remote controller for Air

Conditioner.

Please read this owner's manual carefully before using your Remote controller for Air

Conditioner

• Be sure to obtain the "Owner's manual" and "Installation manual" from constructor (or

dealer).

Request to constructor or dealer

• Please clearly explain the contents of the Owner's manual and hand over it.

Contents

1 PRECAUTIONS FOR SAFETY ........................... 2

2 PART NAMES AND FUNCTIONS ......................... 3

3 CORRECT USAGE .................................... 7

4 TIMER OPERATION .................................... 9

5 HOW TO ADJUST AIR DIRECTION ...................... 10

6 SLIDE SWITCH ...................................... 11

7 HOW TO INSERT BATTERIES .......................... 11

8 HOW TO HANDLE THE REMOTE CONTROLLER ........... 12

9 HOW TO USE THE REMOTE CONTROLLER CORRECTLY... 13

10 ADDRESS .......................................... 14

11 HOW TO PERFORM EMERGENCY OPERATION ........... 15

12 BEFORE ASKING FOR REPAIR WORK .................. 16

-1-

Wireless remote controller kit Owner's Manual

1PRECAUTIONS FOR SAFETY

WARNING

WARNINGS ABOUT INSTALLATION

•Make sure to ask the qualified installation professional in electric work to install the

remote controller.

If the remote controller is inappropriate installed by yourself, it may cause electric shock

or fire, etc.

• Make sure to install the air conditioner specified by TOSHIBA/Carrier and ask the

exclusive dealer when installing. Ifthe air conditioner is installed by yourself, it may cause

electric shock or fire, etc.

WARNINGS ABOUT OPERATION

• Prevent any liquid from falling into the remote controller.

Do not spill juice, water or any kind of liquid.

It may cause malfunction, electric shock or fire, etc.

• When you are aware of any error with the air conditioner (smells like something burning,

etc.), immediately turn off the circuit breaker to stop the air conditioner, and make contact

with the dealer.

If the air conditioner is continuously operated with an error, it may cause malfunction,

electric shock or fire, etc.

WARNINGS ABOUT MOVEMENT AND REPAIR

• Do not repair any unit by yourself.

Whenever the air conditioner needs repair, make sure to ask the dealer to do it.

If it is repaired imperfectly, it may cause electric shock or fire, etc.

• When reinstalling the air conditioner, contact with the dealer.

If the installation is insufficient, it may cause electric shock or fire, etc.

Z_ CAUTION

CAUTIONS ABOUT INSTALLATION

• Do not install the remote controller in a place where its signals do not reach the indoor unit.

• Do not install the remote controller in the place under the direct sunlight and close to any

heat source. It may cause malfunction.

• The fluorescent lamp with rapid start system or inverter system may disturb the signal

reception. For details, contact with the dealer of the air conditioner you have purchased.

CAUTIONS ABOUT OPERATION

• Do not drop or apply strong shock to the air conditioner.

It may cause malfunction of the remote controller.

• Use batteries that meet the specifications.

- 2 - 2-EN

Wirelessremotecontrollerkit Owner'sManual

2PART NAMES AND FUNCTIONS

•Remote Controller (WX-TA01UES)

•Up to 8 indoor units in a group can be controlled by one remote controller. (See page 14)

Illustration of LCD shown below is for explanation.6

1 ,__-__ 11 7

I! _'U_OFI I 9

II _1 ........I.......

13 lO

4 11

17 12

7!--18

813

1Transmitting unit 15

2ON/OFF button

Starts and stops the air conditioner

alternately. 16

3Mode button 17

Selects desired operation mode.

4Fan speed button

5Timer set button

Used to setup the timer. (See page 9)

It may differ from the actual LCD.

Filter button

No function

ACL button

Used after batteries are replacedor the slide

switch is switched. (See page 11)

Slide switch (See page 11)

Battery compartment (See page 11)

Cover

Slide the cover downward holding its both

sides.

Remote controller sensor

Senses the ambient temperature when the

remote controller is selected with the sensor

button.

LCD

Displays the air conditioner operation mode.

(This illustration shows all display contents.)

AUTO louver display differs

according to the installed unit.

(See page 10)

Setup temperature button

Adjust the set point.

Set a desired set point by pushing _ @ or

Swing/air direction button

(See page 10)

Address button (See page 14)

Ventilation button

Use this when a ventilation fan or other unit,

purchased on the market, has been

connected.

3-EN -3-

Wireless remote controller kit Owner's Manual

18 Sensor button

Selects the temperature sensor of the remote

controller.

The temperature sensor of the indoor unit is

selected by default. While the indoor unit

temperature sensor is selected, _ is

displayed on the display.

• Signal Receiving Unit

•The signal receiving unit is attached to the

indoor unit.

•Hereinafter, all remote controller button

names are indicated with respective

symbols displayed on the remote

controller.

Example: ON/OFF button _

[FIR [4

1Emergency operation button

(See page 15)

2Signal receiving unit

Receives signals from the remote controller.

3Display lamp

Any of these lamps flashes while an error

OCCUrs.

When an lamp flashes, see "BEFORE

ASKING FOR REPAIR WORK" on page 16.

4_ lamp

This lamp illuminates when unit is on.

5C) lamp

This lamp illuminates while the timer is

reserved.

6_lamp

• Illuminates in the heating mode at the

beginning of operation or during defrosting

or when the temperature controller is

activated.

• Flashes during an error state.

/_ CAUTION

Even if you push _, _ or _ when

remote controller operation is disabled

by the central control or other means, "pi"

isheard 5times and the button operation

is not accepted.

- 4 - 4-EN

Wireless remote controller kit Owner's Manual

• Display section

All indicators are shown in the right and the lower figures for the

explanation.

Only selected contents are display in actual operation. l isplay

section

Operation

section

1Transmitting indication

Displayedwhile operating the switches of the

remote controller.

2Operation mode

The selected operationmode isdisplayed.

3Fan speed display

The selectedfan speed is displayed.

(AUTO) X@

(HIGH) R_

(MED.) X{

(LOW)

4Ventilation display

This appears while the ventilation fan is

operating.

5Remote control sensor display

This appearswhen the remotecontrol sensor

is used.

6Set up temperature display

The selected set point is displayed.

7Louver position display

Displays louver position.

8Swing display

Displayed during up/down movement of the

louver.

9Timer display

Time of the timer is displayed.

10 Timer mode display

When pushing the Timer SET IN button, the

display of the timer is selected in order of

[OFF] _ --> C.'_ _ repeat OFF timer

-->[ON] _ -->No display.

5-EN -5-

Wireless remote controller kit Owner's Manual

•Operation section

Push each button to select a desired operation.

•The details of the operation needs to be set up once, afterward, the air conditioner can be

used by pushing L!Ponly.

1Mode button 6

Selects the desired operation mode.

2Fan speed button

Selects a fan speed.

3Timer set button

Used to setup the timer. (See page 9) 7

4ACL button

Use this button after battery exchange.

5Setup temperature button

Adjusts the set point.

Set the desired set point by pushing @ or @.

ON/OFF button

When the button is pushed, the operation

starts, and it stops by pushing the button

again.

When the operation has stopped, the

operation lamp and all the displays disappear.

Filter button

No function.

OPTION :

Remote controller sensor

Usually the temperature sensor of the indoor

unit senses the temperature.

The temperature on the surrounding of the

remote controller can also be sensed.

For details, contact the dealer from which

you have purchased the air conditioner.

- 6 - 6-EN

Wireless remote controller kit Owner's Manual

3CORRECT USAGE

• Auto ®, Heat -_, Dry 6,

Cool ®, Fan x

Power

Turn on the power supply switch 12 hours

before starting operation.

* The remote controller is disabled for approx.

1minute after the indoor unit has been

powered on. This is normal. (The signal from

the remotecontroller is received,but the

receive data is discarded.)

1Push I(_ (ON/OFF button).

2Push _ (Mode button) to select an

operation mode.

• Select Auto, Heat, Dry, Cool, or Fan.

3Push R (Fan speed button) to select

afan speed.

• When the Auto mode is selected, the fan

speed changes automatically. The fan

speed does not change automatically in

the Fan mode.

4Push either @or @to select the

desired temperature.

•Temperature setting is not available for the

Fan speed.

5Stop

Push d,D (ON/OFF button).

When the operation is stopped with the

remote controller, the outdoor unit fan keeps

running in some cases even after the

compressor of the outdoor unit has stopped.

• If the room is notwell heatedwith FAN

Bduring heating, change the fan

speed to FAN XJ_or FAN XJ.

Although selected fan speed is displayed,

some indoor unit types are not provided

with the air volume change function. (Fan

speed is constant.)

•If the unit operation cannot be stopped

in the usual manner, turn off the circuit

breaker and contact the dealer from

whom you purchased the air

conditioner,

•Automatic Cooling/Heating

When all indoor units in the same refrigerant

system are under the group control, heating

or cooling operation is automatically

performed according to the difference

between the setup temperature and the

room temperature.

7-EN - 7 -

Wireless remote controller kit Owner's Manual

•Dry operation

•Dry function may not be provided

depending on the using indoor unit, even

if Dry (0) is displayed on the LCD of the

remote controller. (The same to Cooling

operation)

• When the room temperature approaches

the setup temperature, it automatically

repeats running and stop operation.

• In order to not return humidity to the room

as possible, the mode of indoor fan

changes to LOW when the operation has

stopped.

• The fan speed may not be adjustable

depending on the indoor unit that you use

or the room temperature.

• The Dry mode may not be used

depending on the using indoor unit when

the outdoor temperature is 59 °F (15 °C)

or lower.

• Self cleaning

The self cleaning operation starts

automatically after running the cooling/dry

mode (10 minutes or more) to keep the

inside of the indoor unit clean.

(For details, refer to the Owner's Manual of

the indoor unit.)

To stop self cleaning forcibly, push dO twice

quickly.

- 8 - 8-EN

Wireless remote controller kit Owner's Manual

4TIMER OPERATION

•After the timer has been set, put the

remote controller at a position where

signals of the remote controller can reach

the signal receiving unit on the indoor unit.

The timer operation signal is transmitted

from the remote controller.

•Set the timer while an operation mode is

displayed as follows:

Use the timer in the following

cases

To stop the air conditioner OFF

when the preset time has timer

passed

To stop the air conditioner Repeat

each time when the OFF

preset time has passed timer

To operate the air

conditioner when the ON timer

preset time has passed

Mode

displayed

Timer period

The setup time increases by 0.5 hours

(30 minutes) each time you push [_3.

The maximum setup time is 72.0 hours.

The setup time decreases by 0.5 hours

(30 minutes) each time you push [2_.

The minimum setup time is 0.5 hours.

Timer display

Each time you push Timer [_3, the timer

display changes as follows:

_8OO F

No di_la

P Y"_-_

• Setting OFF timer

(Example) To stop operation in 30 minutes

1Push Timer I-_-I.

andthe time flash on the display.

2Set the time to 0.5 with TIME [_ or

12El.

3Push _ and [_ go on timer.

•Setting repeat timer

(Example) To stop operation in every

2.5 hours

1Push Timer _twice.

_"_ _ and the time flash on the display.

2Set the time to 2.5 with TIME [_ or

12El.

3Push _ and _"_ i_ go on timer.

The OFF timer is activated and the operation

stops in 2.5 hours. When you push (I.L)again

to restartthe operation, it stops in 2.5 hours.

• Setting ON timer

(Example) To start operation in 8 hours

1Push Timer _three times.

andthe time flash on the display.

2Set the time to 8.0 with TIME [_ or

I-_q.

3Push _.

The operationmode disappears, and

andthe time stop flashing.

• Canceling timer operation

Push t_. The timer display disappears.

9-EN -9-

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Fernbedienung Handbücher

Toshiba

Toshiba RBC-AX33UYP-E Bedienungsanleitung

Toshiba

Toshiba RBC-AX22CE Bedienungsanleitung

Toshiba

Toshiba RBC-ASCU11-UL Bedienungsanleitung

Toshiba

Toshiba RBC-ASC11E Bedienungsanleitung

Toshiba

Toshiba TCB-AX21E Bedienungsanleitung

Toshiba

Toshiba CT-8003 Bedienungsanleitung

Toshiba

Toshiba RB-RWS21-E Bedienungsanleitung

Toshiba

Toshiba TCB-AX21E Bedienungsanleitung

Toshiba

Toshiba TCB-AX32E2 Bedienungsanleitung

Toshiba

Toshiba TCB-SC643TLE Bedienungsanleitung

Toshiba

Toshiba RBC-AS21E Bedienungsanleitung

Toshiba

Toshiba RBC-AS21E Bedienungsanleitung

Toshiba

Toshiba WH-H1JE2 Bedienungsanleitung

Toshiba

Toshiba RBC-AX32CE2 Bedienungsanleitung

Toshiba

Toshiba Carrier TCB-AX21UL Bedienungsanleitung

Toshiba

Toshiba Carrier RBC-AX22CUL Bedienungsanleitung

Toshiba

Toshiba CAMILEO H30 Montage- und Bedienungsanleitung

Toshiba

Toshiba TCB-SC643TLE Bedienungsanleitung

Toshiba

Toshiba RBC-AMT21E Bedienungsanleitung

Toshiba

Toshiba RG57A8/BGEF Bedienungsanleitung

Toshiba

Toshiba RBC-AMT31-E Bedienungsanleitung

Toshiba

Toshiba RB-RWS21-E Bedienungsanleitung

Toshiba

Toshiba RBC-SRC-PE Bedienungsanleitung

Toshiba

Toshiba RBC-AX32U(W)-E Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung