Toshiba Carrier TCB-AX21UL Bedienungsanleitung

TOSH|BA

Carrier

REMOTE CONTROLLER FOR AIR CONDITIONER (SPLIT TYPE)

Owner's Manual

Remote Controller

Model name:

Wireless remote controller kit

TCB-AX21 UL

Wireless remote controller

Generic model name and signal receiving unit

TCB-AX21 UL WX-TA01U ES

(Wireless remote controller

model name)

zesmsA

ca,m,

Wireless remote controller Signal receiving

(WX-TA01 UES) unit

Owner's Manual

Remote controller for air

conditioner (Split type) 1

Manuel du proprietaire

Telecommande pour climatiseur

(Type split) 19

Wirelessremotecontrollerkit Owner'sManual

Thank you very much for purchasing TOSHIBA/Carrier Remote Controller for Air

Conditioner.

Please read this owner's manual carefully before using your Remote Controller for Air

Conditioner.

• Be sure to obtain the "Owner's manual" and "Installation manual" from constructor (or

dealer).

Request to constructor or dealer

Please clearly explain the contents of the Owner's manual and hand over it.

Contents

1 PRECAUTIONS FOR SAFETY ............................ 2

2 PART NAMES AND FUNCTIONS ......................... 4

3 CORRECT USAGE ..................................... 9

4 TIMER OPERATION ................................... 10

5 SLIDE SWITCH ....................................... 11

6 HOW TO INSERT THE BATTERIES ...................... 12

7 HOW TO HANDLE THE REMOTE CONTROLLER ........... 13

8 HOW TO USE THE REMOTE CONTROLLER CORRECTLY... 14

9 ADDRESS ........................................... 14

10 HOW TO PERFORM EMERGENCY OPERATION ............ 16

11 BEFORE ASKING FOR REPAIR WORK ................... 17

f-EN - 1-

Wireless remote controller kit Owner's Manual

1PRECAUTIONS FOR SAFETY

WARNING

WARNINGS ABOUT INSTALLATION

•Make sure to ask the qualified installation professional

in electric work to install the remote controller,

If the remote controller is inappropriate installed by

yourself, it may cause, electric shock, fire, and so on,

• Make sure to install the air conditioner specified by

TOSHIBA/Carrier and ask the exclusive dealer when

installing, If the air conditioner is installed by yourself,

it may cause electric shock or fire, etc,

WARNINGS ABOUT OPERATION

•Prevent any liquid from falling into the remote

controller.

Do not spill juice, water or any kind of liquid.

It may cause malfunction, electric shock or fire, etc.

• When you are aware of any error with the air

conditioner (smells like something burning etc.),

immediately turn off the circuit breaker to stop the air

conditioner, and make contact with the dealer. If the air

conditioner is continuously operated with an error, it

may cause malfunction, electric shock, fire, and so on.

WARNINGS ABOUT MOVEMENT AND REPAIR

• Do not repair any unit by yourself.

• Whenever the air conditioner needs repair, make sure

to ask the dealer to do it. If it is repaired imperfectly, it

may cause electric shock or fire.

• When reinstalling the air conditioner, contact with the

dealer.

If the installation is insufficient, it may cause electric

shock or fire, etc.

- 2 - 2-EN

Wireless remote controller kit Owner's Manual

z_ CAUTION

CAUTIONS ABOUT INSTALLATION

• Do not install the remote controller in a place where its

signals do not reach the indoor unit.

• Do not install the remote controller in the place under the

direct sunlight and close to any heat source. Itmay

cause malfunction.

• The fluorescent tamp with rapid start system or inverter

system may disturb the signal reception. For details,

contact with the dealer of the air conditioner you have

purchased.

CAUTIONS ABOUT OPERATION

• Do not drop or apply strong shock to the air conditioner.

It may cause malfunction of the remote controller.

• Use batteries that meet the specifications.

3-EN -3-

Wireless remote controller kit Owner's Manual

2PART NAMES AND FUNCTIONS

•Remote Controller (WX-TA01UES)

•Max. 8 indoor units can be operated by a remote controller as a group. (See page 14)

• Illustration of LCD shown below is for explanation. It may differ from the actual LCD.

1Transmitting part

--14

--16

2Remote controller sensor

The peripheral temperature is sensed when

the sensor button is pushed to remote

controller side.

3LCD

The operation mode isdisplayed.

4ON/OFF button

Pushing this button starts, and pushing again

stops the unit.

5Mode button

Selects desired operation mode.

6Fan speed button

7Timer Set button

Use to setup the timer.

(See page 10)

8ACL button

This button is used after replacement of

battery or selection of slide switch.

(See page 11)

9Slide switch

(See page 11)

10 Battery compartment

(See page 12)

11 Cover

Slide the cover holding its both sides.

- 4 - 4-EN

Wireless remote controller kit Owner's Manual

r7 i

C7)-

_ _ACL _ ENSOI

TOSHIBA

_r_er

-13 16

14 17

-15

--16

-17

--18

AUTO louver display differs

according to the installed unit.

No function

Setup temperature button

Adjusts the set point.

Set the desired set point by pushing _ _ or

_).

Filter button

No function

Swing/Air direction button

No function

Address button

(See page 14)

Ventilation button

Use this when a ventilation fan or other unit,

purchased on the market, has been

connected.

Sensor button

This button is used when selecting the temp.

sensor at the remote controller side. At the

shipment from the factory, this button is set to

the temp. sensor at the indoor unit.

5-EN - 5 -

Wireless remote controller kit Owner's Manual

•Signal Receiving Unit

•The signal receiving unit is attached to the indoor unit.

• Hereinafter, all remote controller button names are indicated with respective symbols

displayed on the remote controller.

Example: ON/OFF button -->dO

5--

6--

7--

®l

1Temporary operation button

(See page 16)

2Signal receiving unit

The signal sent from the remote controller is

received.

3Display lamp

Oneof displaysflashed while an erroroccurs.

When the display lampflashes, referto

"BEFOREASKING FOR REPAIR WORK" in

17 page.

4@lamp

This lamp illuminateswhen unit is on.

5(_ lamp

This lamp illuminates while the timer is

reserved.

6_) lamp

• Inheatingoperationthislamp illuminates in

the following cases;

The operation has started.

The temp. controller has worked.

The unit is underdefrost operation.

• This lamp flashes while a trouble occurs.

7[] lamp

This lamp illuminatesto reamind toclean the

air filter.

Z_ CAUTION

• If"pi, pi" sound is heard, the MODE tamp

of the display tamp goes on, and the (_

lamp and _ lamp flash alternately, the

operation is not performed with the

desired mode.

• Even if you push (_, /_ or _ when

remote controller operation is disabled

by the central control or other means, "pi"

is heard 5times and the button operation

is not accepted.

-6-6-EN

Wireless remote controller kit Owner's Manual

• Display section

All indicators are shown in the right and the lower figures for the

explanation.

Only selected contents are display in actual operation.

Display

section

Operation

section

3--

rS_j .... i_.'_

£#£#. OCt-

--6 7

1Transmitting indication

Displayed while operating the switches of the

remote controller.

2Mode display

The selected operation mode is displayed.

3Fan speed display

The selected fan speed is displayed.

(AUTO) N'_,

(HIGH) _{{

(NED.) _{

(LOW) K

4Ventilation display

This appears while the ventilation fan is

operating.

5Remote control sensor display

This appears when the remote control sensor

is used.

6Set up temperature display

The selected set point is displayed.

Louver position display

SWING display

Displayed during up/down movement ofthe

louver.

Timer display

Timer mode display

When pushing the Timer SET button, the

display of the timer is selected in order of

[OFF] _-_ --> _,,,"__ repeat OFF timer

-->[ON] _ -->No display.

7-EN -7-

Wireless remote controller kit Owner's Manual

•Operation section

Push each button to select a desired operation.

•The details of the operation needs to be set up once, afterward, the air conditioner can be

used by pushing (I) button only.

--7

1Mode button

Selects desired operation mode.

2Fan speed button

Selects a fan speed.

3Timer set button

Use to setup the timer. (See page 10)

4ACL button

Use this button after battery exchange.

5Setup Temperature button

Adjusts the set point.

Set the desired set point by pushing _) or T(_b.

6ON/OFF button

When the button is pushed, operation starts,

and it stops by pushing the button again.

When the operation stops, the operation lamp

and all displays disappear.

7 Filter button

No function

OPTION :

Remote controller sensor

Usually the TEMP. sensor of the indoor unit

measured a temperature.

A temperature around the remote controller

can also be measured.

For details, contact the dealer from which

you have purchased the air conditioner.

- 8 - 8-EN

Wireless remote controller kit Owner's Manual

3CORRECT USAGE

•Cool/Heat AUTO ®, Heat "_.'-,

Dry 6, Cool _, Fan X

Power supply

Turn on the power supply switch 12 hours

before starting the operation.

• After the power supply has been turned

on, the operation of the remote controller

is not accepted for approx. 1 minute. It is

not a failure.

(The sensor receives the signal once, but

the received contents are cleared.)

1Push _(ON/OFF button).

2Push [] (Mode button)

operation to select one of _, _, 0 , _,

and B.

3Push X (Fan Speed button) to select

one of fan speed modes.

When selecting _, the fan speed is

automatically changed.

(During FAN mode, the air speed is not

automatically changed.)

4Push either _or _v_ to select the

desired temperature.

During FAN mode, the temperature cannot be

set up.

5Stop

Push ON/OFF button.

When using the remote controller to stop the

unit, the outdoor unit fan may keep operating

for a while even if the compressor of the

outdoor unit has stopped.

•In heating operation, if the room is not

comfortably heated with FAN X,

select FAN XJ_ or HI.

Although they are displayed, the function

may not be provided according to the used

indoor unit. (Fan speed is constant.)

•When the unit cannot be stopped by

the normal operation

Turn off the circuit breaker, and then

contact the shop which you purchased the

unit.

•Automatic cool/heat

When all indoor units in the identical

refrigerant system are controlled as a group,

the cooling/heating operation is

automatically performed with the difference

between the setup temperature and the

room temperature.

•Dry operation

• There is no dry function according to the

used indoor unit even if DRY is displayed

on the display section of the remote

controller. (Same to Cooling operation)

• When the room temperature approaches

the setup temperature, running/stop

operations are automatically repeated.

• In order not to return humidity to the room

as possible, the mode of indoor fan enters

LOW mode when the operation has

stopped.

• The fan speed cannot be adjusted

according to the used indoor unit or status

of the room temperature.

• The DRY mode cannot be used according

to the used indoor unit when the outdoor

temperature is 59°F (15°C) or lower.

9-EN -9-

Andere Handbücher für Carrier TCB-AX21UL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Fernbedienung Handbücher

Toshiba

Toshiba XV55*D Series Bedienungsanleitung

Toshiba

Toshiba RBC-AMTU31-E Bedienungsanleitung

Toshiba

Toshiba CT-8002 Bedienungsanleitung

Toshiba

Toshiba Lite-Vision plus RBC-AMS51E-EN Bedienungsanleitung

Toshiba

Toshiba TCB-AX21U-E Bedienungsanleitung

Toshiba

Toshiba RBC-AX31U-UL Bedienungsanleitung

Toshiba

Toshiba TCB-SC642TLE2 Bedienungsanleitung

Toshiba

Toshiba RBC-AX32CE2 Bedienungsanleitung

Toshiba

Toshiba RBC-AX22CE Bedienungsanleitung

Toshiba

Toshiba RBC-AX32UM(W)-E Bedienungsanleitung

Toshiba

Toshiba RB-RWS21-E Bedienungsanleitung

Toshiba

Toshiba RBC-AMS51E-EN Bedienungsanleitung

Toshiba

Toshiba RBC-IR2-PE Bedienungsanleitung

Toshiba

Toshiba RBC-AXU33UPB-E Bedienungsanleitung

Toshiba

Toshiba RBC-AMT32E Bedienungsanleitung

Toshiba

Toshiba TCB-SC640U-E Bedienungsanleitung

Toshiba

Toshiba RBC-AMS54E Bedienungsanleitung

Toshiba

Toshiba RBC-AMT32E Bedienungsanleitung

Toshiba

Toshiba RBC-AX22CE2 Bedienungsanleitung

Toshiba

Toshiba TCB-AX21E Bedienungsanleitung

Toshiba

Toshiba CT-8003 Bedienungsanleitung

Toshiba

Toshiba Regza 32WLT68 Bedienungsanleitung

Toshiba

Toshiba Carrier TCB-AX21UL Bedienungsanleitung

Toshiba

Toshiba 2358 9721 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung