Toshiba Control panel module for monitor 20550 Bedienungsanleitung

DKT 2404-DECT

User Guide

“Business phones that

build business”

(337) 234-2828

Making a Call to Another Extension

1. Press the TALK button or the speaker-icon button on the handset.

2. Dial the extension number of the desired party (i.e. 201).

NOTE: If you walk out of range of the base station, the handset emits an error

tone and Out of Range is displayed for five seconds. The handset then goes

into idle mode.

Receiving a Call from Another Extension

1. When you receive a call from another extension, the handset rings and

displays the information of the calling party (i.e., name and ext. number)

on the LCD.

2. Press TALK or any of the dialing buttons, or if the handset is in the charger,

just pick it up.

The talk screen displays the calling party information for the duration of the call.

Making an Outside Call

1. Press a line button. The line button lights, the current volume shows for

two seconds and dial tone is heard.

2. Enter telephone number.

Receiving an Outside Call

1. The handset will ring and will display the call on the LCD.

2. Press one of the following:

•the blinking outside line button

•the TALK button

•any dialing button

•or just pick up the handset if it is in the charger.

End a Call

When your call is complete, end the connection bypressing the TALKbutton on the

handset, or just place the handset on the charger.

Redial

PresstheTALKor the speaker-iconbutton; then press the Redial button. The last

number called will be dialed, and the number displays in the LCD.

NOTE:Redial digit length can be up to 32 digits.

CIX No Service

In cases when the TALK or speaker-icon button is pushed and connection to the CIX

cannot be established, or if the base station doesn't respond, the handset goes into idle

mode after blinking the following message for seven seconds:

Out of Range

When the handset is in the idle mode and cannot find the base station, the screen

will display “Out of Range”.

If the TALK, speaker-icon or one of the line buttons are pressed but the handset

cannot establish an RF link with the base station, the handset will sound an error

tone and show the “Out of Range”message.

While talking, if the handset cannot receive a signal from the base station for

approximately five seconds, it goes to idle mode - conversation is dropped -

with an error tone.

Low Battery

Your DKT2404-DECT phone comes equipped with one rechargeable battery

that provides 16 hours of talk time and seven days standby time (fully

charged). The LCD shows the battery according to the remaining capacity.

Low battery symptoms are:

•On a call

•Battery status icon changes to battery low.

•Handset keeps in talk mode and the battery low alert tone is emitted

every 30 seconds.

•In standby mode

•Battery status icon changes to battery low.

•“Charge Battery”message blinks on and off on the display.

To restore your battery capacity, return the handset to the charging unit.

After the handset is on the charging unit for one minute the battery icon

stops blinking and the battery low tone stops.

Mute

During talk mode, press the menu/MUTE button on the front of the handset.

The MUTE icon displays on the screen and the microphone is dead.

Press the menu/MUTE button again to cancel the mute condition. Finishing the

conversation also cancels the mute condition.

Hands Free

Press the speaker-icon button in either standby mode or during a call. The

handset goes to hands-free operation and the speaker icon displays on the

screen.

Press TALK to return to "non-speaker" (normal) operation.

Press the speaker-icon button (or TALK button twice) to end the call and return

to idle.

Volume Settings

Volume setting can be changed from Levels 1 to 6 (highest). Talk mode,

hands-free mode and headset mode each have volume settings. When the +/-

buttons are pressed, the handset immediately goes to volume setting mode,

sounding the ringer and displaying the current volume for five seconds.

During this time use the +/- buttons to change the volume.

Ring Volume Settings

When the +(up) button is pressed when the handset is idle, the

handset goes to the Ringer Volume setting and displays the current

setting. The Ring volume is changed as follows:

Press the + (up) button to show the next screen(s).

When the ringer volume is Off (Vibrate), the handset vibrates instead of ringing.

If the handset is on the charger and a call comes in, the ringer outputs the low

tone instead of vibrating.

Ringer Mute

If the - (down) button is pressed and held for two seconds in standby mode or in

incoming call mode, the handset sets the Ringer mute on, turns on the Ringer

mute icon and stops the ringer. Press and hold the - button for two seconds to turn

the Ringer mute off (unmute).

Any incoming call will blink on the handset.

The setting will be saved until it is changed.

Change Ringer Type

1. Press the menu/MUTE button in idle mode. The LCD shows the menu

list.

2. Select Change Ringer Type by the +or - button and press menu/MUTE.

3. The LCD shows tone types and sounds each one as the + or –button is

pressed.

4. Press the menu/MUTE button to save the desired tone.

One Touch Dialing

The F9 –F12 buttons (bottom row of buttons on the phone) can be programmed

as One Touch buttons.

To Program One Touch / Flexible Button

1. Press the menu/MUTE button. The LCD shows the menu list.

2. Select One Touch Dial Setting using the + or - buttons and press

menu/MUTE.

3. Select One Touch Dial 1 -4 using the + or - buttons. The handset shows

One Touch button name and the number that is stored.

4. Press menu/MUTE to the edit the display.

5. Enter the telephone number (9 + number) or CNF/TRN + extension

One Touch Dialing can store up to 24 digits.

Hint: To delete the last digit, press the - button. To delete all digits,

press and hold the -button.

6. Press the menu/MUTE button to save.

To Use One Touch

1. Press the TALK button on the handset to get dial tone.

2. Press the One Touch button. The number registered will be shown and the

digits will be dialed.

An error tone is emitted when the handset does not have a One Touch button.

Place a Call on Hold

1. Press the Hold button. HOLD displays on the LCD.

2. To resume call, press the flashing function button.

Transfer a Call

Press Cnf/Trn. Dial the extension number in which you wish to transfer the call

to. When the receiving party answers, press Cnf/Trn to complete the transfer.

Conference a Call

Press Cnf/Trn. Dial the telephone number for an outside line. When the other

party answers, press Cnf/Trn to have a three-way conversation.

Switch a Call to Your Cordless Telephone

1. Press Hold on the desktop telephone; then press Talk on the DKT2404-

DECT handset.

2. Press the flashing Line LED. The call is now transferred to the DKT2404-

DECT handset, and the desktop telephone is disconnected.

Switch a Call to the Desk Telephone

1.Press Hold on the DKT2404-DECT handset.

2. Pick up the desktop telephone and press the flashing Line LED. The

cordless telephone is disconnected.

206 Rue Louis XIV

Lafayette, LA 70508

337-234-2828 (Office)

[email protected]

Visit our Website for Video Tutorials:

http://UniversalComOneLA.com/User-Guides/

UCOLA - 061113

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Telefon Handbücher

Toshiba

Toshiba CTX IPT 1010F-SD Bedienungsanleitung

Toshiba

Toshiba IP4100 Series Bedienungsanleitung

Toshiba

Toshiba Strata CTX100 Handbuch

Toshiba

Toshiba Strata CIX DP5000-Series Bedienungsanleitung

Toshiba

Toshiba Strata CIX DP5000-Series Bedienungsanleitung

Toshiba

Toshiba Strata CIX DP-5000 series Bedienungsanleitung

Toshiba

Toshiba Strata DK 24 Bedienungsanleitung

Toshiba

Toshiba Strata CIX DP5000-Series Bedienungsanleitung

Toshiba

Toshiba Strata CIX IPT Service-Handbuch

Toshiba

Toshiba Strata AirLink DK280 Bedienungsanleitung

Toshiba

Toshiba Strata CIX DP-5000 series Bedienungsanleitung

Toshiba

Toshiba STRATA CIX Bedienungsanleitung

Toshiba

Toshiba Strata DK8 Bedienungsanleitung

Toshiba

Toshiba Strata DK14 Bedienungsanleitung

Toshiba

Toshiba Strata CIX DP-5000 series Bedienungsanleitung

Toshiba

Toshiba Strata DK 24 Bedienungsanleitung

Toshiba

Toshiba PC-DKT Bedienungsanleitung

Toshiba

Toshiba Strata VI Handbuch

Toshiba

Toshiba DKT3001/2001 Bedienungsanleitung

Toshiba

Toshiba Strata DKT Bedienungsanleitung

Toshiba

Toshiba Strata CIX IP5000-Series Bedienungsanleitung

Toshiba

Toshiba Strata IP5000 series Bedienungsanleitung

Toshiba

Toshiba Strata CTX100 Bedienungsanleitung

Toshiba

Toshiba Strata VI Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung