Toshiba 4200FA Series Technisches Handbuch

TOSHIBA 4200FA XT UPS

Installation Planning Guide for 15-80kVA UPS

Standard System: 208v Input, 208/120V Output

Rev. 1.03 Page 1 of 2 4200FA-IPG-208v-XT1

General Mechanical Information

Dimensions

(W x D x H) Approximate Full-Load Heat Loss

UPS kVA/ kW Rating Inches

Weight

Lbs. kBTU’s / Hr

15 kVA/12 kW 20 x 36.25 x 59.85 900 5.7

25 kVA/ 20 kW 20 x 36.25 x 59.85 910 7.6

30 kVA/ 24 kW 20 x 36.25 x 59.85 915 9.1

50 kVA/ 40 kW 35.59 x 38.19 x 59.39 2,548 17.7

80 kVA / 64 kW 44 x 31 x 74 2,200 40.0

Primary AC Input (208V 3-Phase / 3-Wire)

Maximum Input Power

Demand Suggested External

Overcurrent Protection Suggested Minimum Feeder

Wire Size Per Phase Suggested Maximum Feeder Length

For Min. Wire Size in Steel Conduit

kVA PF Amps Amps AWG or kcmil at 75º C Temp. Rating Feet

15 >0.97 45.7 60 AT (1) x 8 380

25 >0.97 76.3 90 AT (1) x 4 380

30 >0.97 92.4 125 AT (1) x 3 380

50 >0.97 152.6 200 AT (1) x 1/0 380

80 >0.98 244.3 300 AT (1) x 300 380

Optional Alternate AC Input (208/120V 3-Phase / 4-Wire)

Maximum Input Power

Demand Suggested External

Overcurrent Protection Suggested Minimum Feeder

Wire Size Per Phase / Neutral Suggested Maximum Feeder Length

For Min. Wire Size in Steel Conduit

kVA Amps Amps AWG at 75º C Temp. Rating Feet

15 41.6 60 AT (1) x 8 / (1) x 6 380

25 69.4 90 AT (1) x 4 / (1) x 2 380

30 83.3 110 AT (1) x 3 / (1) x 1 380

50 138.8 175 AT (1) x 1/0 / (1) x 4/0 380

80 222.1 300 AT (1) x 4/0 / (1) x 400 380

Battery Input (288VDC Nominal)

Battery Capacity Required

for Full Load Output Maximum Discharge

at Full Load Output Suggested External

Overcurrent Protection Suggested Minimum Feeder

Wire Size Per Phase Suggested Maximum Feeder Length

For Min. Wire Size in Steel Conduit

kVA kWB Amps DC Amps AWG or kcmil at 75º C Temp. Rating Feet

15 13.33 61.7 90 AT (1) x 6 70

25 22.22 102.8 125 AT (1) x 2 70

30 26.67 123.0 175 AT (1) x 1 70

50 44.44 205.7 225 AT (1) x 4/0 70

80 71.11 329.2 400 AT (2) x 3/0 70

AC Output (208/120V 3-Phase / 4-Wire)

Rated Output Power Suggested External

Overcurrent Protection Suggested Minimum Feeder

Wire Size Per Phase / Neutral Suggested Maximum Feeder Length

For Min. Wire Size in Steel Conduit

kVA PF Amps Amps AWG or kcmil at 75º C Temp. Rating Feet

15 0.8 41.6 60 AT (1) x 8 / (1) x 6 380

25 0.8 69.4 90 AT (1) x 4 / (1) x 2 380

30 0.8 83.3 110 AT (1) x 3 / (1) x 1 380

50 0.8 138.8 175 AT (1) x 1/0 / (1) x 4/0 380

80 0.8 222.1 300 AT (1) x 4/0 / (1) x 400 380

TOSHIBA 4200FA XT UPS

Installation Planning Guide for 15-80kVA UPS

Standard System: 208v Input, 208/120V Output

Rev. 1.03 Page 2 of 2 4200FA-IPG-208v-XT1

Important Notes:

1. Maximum Current required at Primary AC Input based on full load output and maximum

battery charging current.

2. Output load conductors are to be installed in separate conduit from input conductors.

3. Control wires and power wires are to be installed in separate conduits.

4. Recommended AC input and output overcurrent protection based on continuous full load

current per NEC.

5. Wiring shall comply with all applicable national and local electrical codes.

6. Grounding conductors to be sized per NEC Article 250-122. Neutral conductors to be sized

per NEC Article 310.15.

-Primary AC Input: 3φ, 4-wire + ground.

-AC Output: 3φ, 4-wire + ground.

-DC Input: 2-wire (Positive/Negative) + ground.

7. Nominal battery voltage based on the use of VRLA type batteries (2.0 volts / cell nominal).

8. Maximum battery discharge current based on lowest permissible discharge voltage of 1.6

VPC.

9. DC wires should be sized to allow not more than a 2-volt drop at maximum discharge

current.

10. Weights include internal batteries.

11. Sizing calculations based on the following assumptions:

-Not more than 3 current-carrying conductors installed in steel conduit in ambient temperature of 30

degrees C.

-Temperature rating of conductors and terminals: 90 deg. C.

-Feeder distance calculations based on NEC Tables 8 and 9 data, allowing for 2% AC voltage drop.

-Reference: 2002 NEC Handbook. Consult latest edition of applicable national and local codes for

possible variations.

12. Ratings of wires and overcurrent devices are suggested minimums. Consult with a

registered Professional Engineer within your local area for proper size selections.

TOSHIBA INTERNATIONAL CORPORATION

13131 West Little York Road

Houston, TX 77041

Telephone: 800.231.1412; 713.466.0277

Fax: 713.896.5212

Corporate Web Site: www.tic.toshiba.com

Group Web Site: www.toshibaups.com

Andere Handbücher für 4200FA Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba UPS Handbücher

Toshiba

Toshiba G9000 SERIES Bedienungsanleitung

Toshiba

Toshiba G9000 SERIES Bedienungsanleitung

Toshiba

Toshiba G9000 SERIES Bedienungsanleitung

Toshiba

Toshiba 4400 Series Bedienungsanleitung

Toshiba

Toshiba 4300 series Bedienungsanleitung

Toshiba

Toshiba G9000 SERIES Bedienungsanleitung

Toshiba

Toshiba 1600EP Series Bedienungsanleitung

Toshiba

Toshiba 1600XP SERIES Bedienungsanleitung

Toshiba

Toshiba UNINTERRUPTIBLE POWER SYSTEM 1600XP Bedienungsanleitung

Toshiba

Toshiba UPSMON PRO T1000 Series Bedienungsanleitung

Toshiba

Toshiba G8000 Series Benutzerhandbuch

Toshiba

Toshiba 1400XL Plus Series Bedienungsanleitung

Toshiba

Toshiba 1000 Series Bedienungsanleitung

Toshiba

Toshiba 1600EP Series Bedienungsanleitung

Toshiba

Toshiba Satellite 5000 Series Bedienungsanleitung

Toshiba

Toshiba G8000U Series Bedienungsanleitung

Toshiba

Toshiba G9000 SERIES Bedienungsanleitung

Toshiba

Toshiba G2020 Series Bedienungsanleitung

Toshiba

Toshiba UE3G2L036C61T Bedienungsanleitung

Toshiba

Toshiba 4400 Series Bedienungsanleitung

Toshiba

Toshiba Power Supply Bedienungsanleitung

Toshiba

Toshiba 1000 Series Bedienungsanleitung

Toshiba

Toshiba Satellite 1700 Series Bedienungsanleitung

Toshiba

Toshiba 1600XP SERIES Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung