Toshiba Satellite 1700 Series Bedienungsanleitung

55611-001

Toshiba 1700 Series UPS

Option Module Connection Guide

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS. This sheet contains important instructions for Toshiba 1700 Series Transformer Modules.

These instructions should be followed during the installation of the transformer module.

The ambient temperature range in which this unit should be operated or stored is 32°F to 104 °F (0°C to 40 °C).

This module should not be opened under any circumstances. There are no user servicable parts inside. For service

contact your local Toshiba representative, or contact the Toshiba UPS marketing department toll-free at (800) 231-

1412.

When adding transformer modules, be sure to use the proper model unit.

CAUTION Misuse of this equipment could result in human injury and equipment damage. In no event will

Toshiba Corporation be responsible or liable for either indirect or consequential damage or injury that

may result from the use of this equipment.

Inspection/Installation

After Unpacking:

1) Check the unit for loose, broken, bent or otherwise damaged parts. If damage has occurred during shipment, keep all

original packing materials for return to shipping agent. Warranty will not apply to units damaged during shipment.

2) Check to see that the rated capacity and the model number specified on the nameplate conform to the order

specifications.

Installation Precautions

This transformer module is intended for use with a Toshiba 1700 Series UPS. Any electrical or mechanical

modifications to this equipment, without prior written consent of Toshiba International Corporation will void all

warranties and may void UL/CUL listing. Unauthorized modifications also can result in personal injury, death, or

destruction of the equipment. When installing this transformer module follow all installation instructions and precautions

as listed in the 1700 Series user manual.

Specifications UF1-IO-

Model Number 024-6AA 024-6EE

Capacity 2400VA

(1.68kW) 2400VA

(1.68kW)

Input voltage Single phase

120VAC Single phase

230VAC

Input

frequency 45 to 65 Hz

Input capacity

2400VA 2400VA

Input

Input power

factor Approximately unity (0.95 to 1.0)

Output

voltage Single phase

120VAC Single phase

230VAC

Output

voltage

regulation Within +/- 3%, steady state

Output

frequency 50/60 Hz (+/- 0.5% in free running

mode, line sync range +/-1%)

Rated load

power factor 0.7

Output

Rated output

current (rms) 20A 10A

Figure 1

Module Layout

UPS Connections

Standard Unit with 120V Isolation Module

Figure 2 shows the standard unit, consisting of one

electronics module and one battery module, with the

addition of the 120V isolation transformer module.

The modules do not have to be stacked for the unit to

operate; however, if the modules are to be stacked

please refer to the 1700 Series user manual for

instructions on interlocking modules.

To connect the modules electrically follow these steps:

1. The power cord from the electronics module must be

plugged into the output receptacle on the back of the

option module (see figure 1).

2. The input power cord from the option module must

be plugged into a power source (see figure 1).

The battery power cord must also be plugged into the

electronics module for the system to provide backup

power (refer to the 1700 Series user manual or the

battery module installation instructions for instructions on

connecting the battery module).

Note: No more than three modules should be stacked

in any configuration. If the option module is being used

with a system that has an expansion battery module at

least one module must be placed beside the others.

Stacking four modules could result in a tipping hazard.

Standard Unit with 230V IO Module

Figure 3 shows the standard unit, consisting of one

electronics module and one battery module, with the

addition on the 230V transformer module.

The modules do not have to be stacked for the unit to

operate; however, if the modules are to be stacked

please refer to the 1700 Series user manual for

instructions on interlocking modules.

To connect the modules electrically follow these steps:

1. Plug the output power cord from the transformer

module into one of the output receptacles on the

back of the electronics module (in the case of the

2.4kVA model the cord can only be plugged into the

20A outlet, see figure 1).

2. Next, plug the power cord from the electronics

module into the output receptacle on the back of the

transformer module (see figure 1).

3. The input power cord from the transformer module

must be plugged into a power source (see figure 1).

The battery power cord must also be plugged into the

electronics module for the system to provide backup

power (refer to the 1700 Series user manual or the

battery module installation instructions for instructions on

connecting the battery module). The unused

receptacles on the back of the electronics module are

still active, but they are providing 120V power, not 230V.

All 230V power must be drawn from the output

receptacles on the back of the option module.

Figure 2 : 120V Isolation Transformer Module Configuration Figure 3: 230V Transformer Module Configuration

Andere Handbücher für Satellite 1700 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba UPS Handbücher

Toshiba

Toshiba 4200FA Series Technisches Handbuch

Toshiba

Toshiba 4300 series Bedienungsanleitung

Toshiba

Toshiba 4200FA XT1 Leitfaden

Toshiba

Toshiba G9000 SERIES Bedienungsanleitung

Toshiba

Toshiba T90S3S08KS6XSN Bedienungsanleitung

Toshiba

Toshiba G8000MM Series Bedienungsanleitung

Toshiba

Toshiba G2020 Series Bedienungsanleitung

Toshiba

Toshiba G8000 Series Bedienungsanleitung

Toshiba

Toshiba 1400XL Plus Series Bedienungsanleitung

Toshiba

Toshiba 4200FA Series Bedienungsanleitung

Toshiba

Toshiba Satellite 1700 Series Bedienungsanleitung

Toshiba

Toshiba G8000 Series Benutzerhandbuch

Toshiba

Toshiba 4400 Series Bedienungsanleitung

Toshiba

Toshiba 1600EP Series Bedienungsanleitung

Toshiba

Toshiba 1600 Series Montageanleitung

Toshiba

Toshiba 1600XP SERIES Bedienungsanleitung

Toshiba

Toshiba 4400 Series Bedienungsanleitung

Toshiba

Toshiba G8000 Series Bedienungsanleitung

Toshiba

Toshiba SG 1000 Montageanleitung

Toshiba

Toshiba Satellite 5000 Series Bedienungsanleitung

Toshiba

Toshiba Satellite 1700 Series Bedienungsanleitung

Toshiba

Toshiba G9000 SERIES Bedienungsanleitung

Toshiba

Toshiba RemotEye II Bedienungsanleitung

Toshiba

Toshiba 4200FA XT Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung