Tosot TTH09K3FI Bedienungsanleitung

Air Conditioners

Installation Manual

DC Inverter U-match Series

Floor Ceiling Type Unit

Models:

Indoor Unit Outdoor Unit

TTH09K3FI TUHD09NK3FO

TTH12K3FI TUHD12NK3FO

TTH18K3FI TUHD18NK3FO

TTH24K3FI TUHD24NK3FO

TTH30K3FI TUHD30NK3FO

TTH36K3FI TUHD36NK3FO

TTH42K3FI TUHD42NK3FO

TTH48K3FI TUHD48NK3FO

TTH36K3FI TUHD36NM3FO

TTH42K3FI TUHD42NM3FO

TTH48K3FI TUHD48NM3FO

TTH60K3FI TUHD60NM3FO

Thank you for choosing our product.

For proper operation, please read and keep this manual carefully.

1 Safety Precautions .......................................................................................... 1

2 Outline of the Unit and Main Parts................................................................... 2

3 Preparative for Installation............................................................................... 3

3.1 Standard Accessory Parts .......................................................................... 3

3.2 Selection of the Installation Location.......................................................... 4

3.3 Connection Pipe Requirement ................................................................... 5

3.4 Electrical Requirement ............................................................................... 6

4 Installation of the Unit...................................................................................... 8

4.1 Installation of the Indoor Unit...................................................................... 8

4.2 Installation of the Outdoor Unit................................................................. 10

4.3 Installation of the Connection Pipe........................................................... 12

4.4 Vacuum and Gas Leakage Inspection...................................................... 15

4.5 Installation of the Drain Pipe .................................................................... 17

4.6 Electrical Wiring........................................................................................ 19

5 Installation of Controllers............................................................................... 24

6 Test Running.................................................................................................. 24

6.1 Trial Operation and Testing....................................................................... 24

6.2 Working Temperature Range.................................................................... 26

7. Troubleshooting and Maintenance ............................................................... 27

7.1 Troubleshooting........................................................................................ 27

7.2 Routine Maintenance ............................................................................... 28

Contents

DC Inverter U-match Series Floor Ceiling Type Unit

1 Safety Precautions

WARNING! This mark indicates procedures which, if improperly performed, might lead to the

death or serious injury of the user.

CAUTION! This mark indicates procedures which, if improperly performed, might possibly result

in personal harm to the user, or damage to property.

WARNING!

(1). For operating the air conditioner pleasantly, install it as outlined in this installation manual.

(2). Connect the indoor unit and outdoor unit with the room air conditioner piping and cord available from

our standard parts. This installation manual describes the correct connections using the installation

set available from our standard parts.

(3). Installation work must be performed in accordance with national wiring standards by authorized

personnel only.

(4). If refrigerant leaks while work is being carried out, ventilate the area. If the refrigerant comes in

contact with a ame, it produces toxic gas.

(5). Do not power on until all installation work is complete.

(6). During installation, make sure that the refrigerant pipe is attached firmly before you run the

compressor.

Do not operate the compressor under the condition of refrigerant piping not attached properly with

2-way or 3-way valve open.

This may cause abnormal pressure in the refrigeration cycle that leads to breakage and even injury.

(7). During the pump-down operation, make sure that the compressor is turned off before you remove

the refrigerant piping.

Do not remove the connection pipe while the compressor is in operation with 2-way or 3-way valve

open.

This may cause abnormal pressure in the refrigerant cycle that leads to breakage and even injury.

(8). When installing and relocating the air conditioner, do not mix gases other than the specified

refrigerant (R410A) to enter the refrigerant cycle.

If air or other gas enters the refrigerant cycle, the pressure inside the cycle will rise to an abnormally

high value and cause breakage, injury, etc.

(9). This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

(10). Children should be supervised to ensure that they do not play with the appliance.

(11). If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualied persons in order to avoid a hazard.

DC Inverter U-match Series Floor Ceiling Type Unit

2 Outline of the Unit and Main Parts

Indoor

Outdoor

1. Guide louver

2. Air lter

3. Wired controller

4. Wireless Controller

5. Binding tape

6. Drain Pipe

7. Gas Pipe

8. Lipuid Pipe

9. Big Handle

10. Front Board

3 4

679 810

1 2

Air inlet

Air outlet

Fig.1

Notes:

① .

The connection pipe and duct for this unit should be prepared by the user.

② .

This unit is standard equipped with the rectangular duct.

DC Inverter U-match Series Floor Ceiling Type Unit

3 Preparative for Installation

3.1 Standard Accessory Parts

The standard accessory parts listed below are furnished and should be used as required.

Table 1

Indoor Unit Accessories

No. Name Appearance Q'ty Usage

1 Nut with Washer 8 To x the hook on the cabinet

of the unit.

2Wireless

Controller+Battery 1+2 To control the indoor unit

3 Insulation 1 To insulate the gas pipe

4 Insulation 1 To insulate the liquid pipe

5 Installation Paperboard 2 To insulate the drain pipe

6 Fastener 4 To fasten the sponge

7 Nut 1 To connect gas pipe

8 Nut 1 To connect liquid pipe

Table 2

Outdoor Unit Accessories

No. Name Appearance Q'ty Usage

1 Drain Plug 3 To plug the unused drain hole.

2 Drainage Connecter or 1 To connect with the hard PVC

drain pipe

DC Inverter U-match Series Floor Ceiling Type Unit

3.2 Selection of the Installation Location

WARNING!

The unit must be installed where strong enough to withstand the weight of the unit and xed securely,

otherwise the unit would topple or fall off.

CAUTION!

① .

Do not install where there is a danger of combustible gas leakage.

② .

Do not install the unit near heat source, steam, or ammable gas.

③ .

Children under 10 years old must be supervised not to operate the unit.

Decide the installation location with the customer as follows:

3.2.1 Indoor Unit

(1). Install the unit at a place where is strong enough to withstand the weight of the unit.

(2). The air inlet and outlet of the unit should never be clogged so that the airow can reach

every corner of the room.

(3). Leave service space around the unit as required in Fig.2.

◆Floor type

Unit: mm

>600

>1000

>300

>600

>1500

◆Ceiling type

Unit: mm

>300

>600

>600 >1500

>200>2300

Fig. 2

(4). Install the unit where the drain pipe can be easily installed.

(5). The space from the unit to the ceiling should be kept as much as possible so as for more

convenient service.

DC Inverter U-match Series Floor Ceiling Type Unit

3.2.2 Outdoor Unit

WARNING!

① .

Install the unit where it will not be tilted by more than 5°.

② .

During installation, if the outdoor unit has to be exposed to strong wind, it must be xed securely.

If possible, do not install the unit where it will be exposed to direct sunlight. (If necessary, install

a blind that does not interfere with the air ow.)

(1). Install the outdoor unit in a place where it will be free from being dirty or getting wet by rain

as much as possible.

(2). Install the outdoor unit where it is convenient to connect with the indoor unit.

(3). Install the outdoor unit where the condensate water can be drained out freely during

heating operation.

(4). Do not place animals and plants in the path of the warm air.

(5). Take the air conditioner weight into account and select a place where noise and vibration

are small.

(6). Install the outdoor unit where is capable of withstanding the weight of the unit and

generates as less noise and vibration as possible.

(7). Provide the space shown in Fig.3, so that the air flow is not blocked. Also for efficient

operation, leave three of four directions of peripheral constructions open.

Units: mm

＞500

＞500 ＞500 ＞500

＞2000

＞1000

Fig.3

3.3 Connection Pipe Requirement

CAUTION!

The maximum length of the connection pipe is listed in the table below. Do not place the units between

which the distance exceeds the maximum length of the connection pipe.

DC Inverter U-match Series Floor Ceiling Type Unit

Table 3

Size of Fitting

Pipe(Inch)

Max.

Pipe

Length

(m)

Max. Height

Difference between

Indoor Unit and

Outdoor Unit (m)

Drainage

pipe(Outer

Diameter × wall

thickness) (mm)

Liquid Gas

TTH09K3FI TUHD09NK3FO 1/4 3/8 20 15 φ17×1.75

TTH12K3FI TUHD12NK3FO 1/4 3/8 20 15 φ17×1.75

TTH18K3FI TUHD18NK3FO 1/4 1/2 20 15 φ17×1.75

TTH24K3FI TUHD24NK3FO 3/8 5/8 30 15 φ17×1.75

TTH30K3FI TUHD30NK3FO 3/8 5/8 30 15 φ17×1.75

TTH36K3FI TUHD36NK3FO 3/8 5/8 30 15 φ17×1.75

TTH42K3FI TUHD42NK3FO 3/8 5/8 50 30 φ17×1.75

TTH48K3FI TUHD48NK3FO 3/8 5/8 50 30 φ17×1.75

TTH36K3FI TUHD36NM3FO 3/8 5/8 30 15 φ17×1.75

TTH42K3FI TUHD42NM3FO 3/8 5/8 50 30 φ17×1.75

TTH48K3FI TUHD48NM3FO 3/8 5/8 50 30 φ17×1.75

TTH60K3FI TUHD60NM3FO 3/8 3/4 50 30 φ17×1.75

(1). The connecting pipe should be thermally insulated properly.

(2). The pipe wall thickness shall be 0.5-1.0mm and the pipe wall shall be able to withstand the

pressure of 6.0 MPa. The longer the connecting pipe, the lower the cooling and heating

effect performs.

(3). The pipe wall thickness shall be 0.5-1.0mm and the pipe wall shall be able to withstand the

pressure of 6.0 MPa. The longer the connecting pipe, the lower the cooling and heating

effect performs.

3.4 Electrical Requirement

Electric Wire Size and Fuse Capacity.

Table 4

Indoor Units

Power Supply Fuse Capacity Breaker Capacity Min. Power Supply Cord

V/Ph/Hz A A mm2

09K~60K 220-240V~ 50Hz 5 6 1.0

Item

Model

DC Inverter U-match Series Floor Ceiling Type Unit

Table 5

Model Power

Supply

Capability of Air

Switch(A)

Minimum Sectional Area of Power

Cable and Earth line (mm2)

TUHD09NK3FO

220-240V

～50Hz

13 1.5

TUHD12NK3FO 13 1.5

TUHD18NK3FO 16 1.5

TUHD24NK3FO 20 2.5

TUHD30NK3FO 20 2.5

TUHD36NK3FO 25 2.5

TUHD42NK3FO 25 2.5

TUHD48NK3FO 40 6.0

TUHD36NM3FO

380-415V 3N

～50Hz

10 1.5

TUHD42NM3FO 10 1.5

TUHD48NM3FO 16 1.5

TUHD60NM3FO 16 1.5

Notes:

① .

The fuse is located on the main board.

② .

Install the disconnect device with a contact gap of at least 3mm in all poles nearby the units

(Both indoor unit and outdoor unit).The appliance must be positioned so that the plug is

accessible.

③ .

The specications of the breaker and power cable listed in the table above are determined

based on the maximum power (maximum amps) of the unit.

④ .

The specifications of the power cable listed in the table above are applied to the conduit-

guarded multi-wire copper cable (like, YJV copper cable, consisting of PE insulated wires and

a PVC cable jacket) used at 40°С and resistible to 90°С(see IEC 60364-5-52). If the working

condition changes, they should be modied according to the related national standard.

⑤ .

The specifications of the breaker listed in the table above are applied to the breaker with

the working temperature at 40°С. If the working condition changes, they should be modied

according to the related national standard.

⑥ .

Take 2 pieces of power cord of 0.75mm2as the communication lines between indoor and

outdoor unit, with their longest lengths of 50m. Please select the appropriate line length as per

the actual installation conditions. The communication lines can not be twisted together. For

the unit (≤30K), it’s recommended to use 8m long communication line.

⑦ .

Take 2 pieces of power cord of 0.75mm2as the communication lines between the wired

controller and the indoor unit, with their longest lengths of 30m. Please select the appropriate

line length as per the actual installation conditions. The communication lines can not be twisted

together. It’s recommended to use 8m long communication line.

⑧ .

The wire size of the communication line should be no less than 0.75mm2. It’s recommended to

take 0.75mm2power cords as the communication line.

DC Inverter U-match Series Floor Ceiling Type Unit

4 Installation of the Unit

4.1 Installation of the Indoor Unit

4.1.1 Indoor unit dimension

WARNING !

① .

Install the indoor unit in a location which can withstand a load of at least five times the

weight of the main unit and which will not amplify sound or vibration.

② .

If the installation location is not strong enough, the indoor unit may fall and cause injuries.

③ .

If the job is done with the panel frame only, there is a risk that the unit will come loose.

Please take care.

Fig.4

Table 6

Model A B C D H

TTH09K3FI

1220 225 1158 280 700

TTH12K3FI

TTH18K3FI

TTH24K3FI

TTH30K3FI

1420 245 1354 280 700TTH36K3FI

TTH42K3FI

TTH48K3FI

1700 245 1634 280 700

TTH60K3FI

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tosot Klimaanlage Handbücher

Tosot

Tosot GPC08AO-A3NNA1A Bedienungsanleitung

Tosot

Tosot HANSOL R32 Series Bedienungsanleitung

Tosot

Tosot 5,000 BTU-GPC05AK-A3NNA1C Bedienungsanleitung

Tosot

Tosot TW09HXP2A1A Bedienungsanleitung

Tosot

Tosot TW09HQ2C2AO Bedienungsanleitung

Tosot

Tosot TFH09K3FI Bedienungsanleitung

Tosot

Tosot GPC05AP-A3NNA1A Bedienungsanleitung

Tosot

Tosot PAT Series Bedienungsanleitung

Tosot

Tosot MTS2R-18HDI Bedienungsanleitung

Tosot

Tosot TFM125-9K Bedienungsanleitung

Tosot

Tosot TM09HSFDI Bedienungsanleitung

Tosot

Tosot TU24-24AADU Bedienungsanleitung

Tosot

Tosot TM12HKDI Bedienungsanleitung

Tosot

Tosot TWH09UB-K3DNA2E Bedienungsanleitung

Tosot

Tosot SMART INVERTER Series Bedienungsanleitung

Tosot

Tosot GPC08ASB-A6NNA1A Bedienungsanleitung

Tosot

Tosot TW09HQ3D6DI Bedienungsanleitung

Tosot

Tosot GWH09QCXB-D3DND4B/O Bedienungsanleitung

Tosot

Tosot WAT Series Bedienungsanleitung

Tosot

Tosot TW12HQ3C2AI Bedienungsanleitung

Tosot

Tosot GJC08BU-A6NRNJ2A Bedienungsanleitung

Tosot

Tosot TUHD18ND3F1O Bedienungsanleitung

Tosot

Tosot TW09HQ1C8D Bedienungsanleitung

Tosot

Tosot KSWA-04S63Dg Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung