Total Protection Solutions ComTrack TK-CT2-DB9 Bedienungsanleitung

WARRANTY STATEMENT

During the applicable warranty period, any Total Protection Solutions™ surge

protector device which fails due to defect in materials, workmanship, or any transient

surge event, including lightning, shall be repaired or replaced at TPS’s discretion without

charge. The ap-plicable warranty period for the TPS surge protective device is outlined

below in the War-ranty Period section. The warranty period for any repaired devices or

replacement devices will be only the remaining portions of the original limited warranty.

Within a reasonable time, but in no case to exceed forty-five (45) days, user shall contact

Company's customer service department and obtain a Return Material Authorization (RMA)

before returning any products. User shall ship the product(s), with proof of purchase, to

Company freight prepaid.

The Company shall have no liability under this warranty for problems or defects directly or

indirectly caused by misuse of the Product, alteration of the Product (including removal of

any warning labels), accidents, improper installation, application, operation or improper

repair of the Product.

THIS WARRANTY REPRESENTS THE ENTIRE WARRANTY OF THE COMPANY.

ALL OTHER WARRANTIES EXPRESS OR IMPLIED, ORAL OR WRITTEN, INCLUD-

ING, BUT NOT LIMITED TO, THE WARRANTIES OF MERCHANT ABILITY AND

FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.

The liability of the Company, at its sole option, under this warranty is expressly limited to

the replacement or repair of the defective part thereof. IN NO EVENT SHALL THE COM-

PANY BE LIABLE OR RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSE-

QUENTIAL DAMAGES OF ANY KIND OR CHARACTER, NOR SHALL ITS LIABIL-

ITY EVER EXCEED THE PURCHASE PRICE PAID TO COMPANY FOR SUCH DE-

FECTIVE PRODUCT.

This warranty is not transferable and may only be enforced by the original purchaser.

Claims under this warranty must be submitted to Total Protections Solutions, LLC. within

thirty (30) days of discovery of any suspected product defect.

Three Year Unlimited Free Replacement

Warranty for the original purchaser only.

Warranty Period

TK-CT2-DB9 , TK-CT2-CAT6

TK-CT2-CAT6-POE &

TK-CT2-AmpPro

SAVE THESE INSTRUCTIONS

Note: If devices are received damaged, notify the shipping company immediately.

Retain containers and packing materials for inspection.

ComTrack™

Low Voltage Units

TK-CT2-DB9

TK-CT2-CAT6

TK-CT2-CAT6-POE

TK-CT2-AmpPro

COMTRACK™ INSTALLATION, OPERATION AND MAINTENANCE MANUAL V1.03COMTRACK™ INSTALLATION, OPERATION AND MAINTENANCE MANUAL

rack

™

Surge

Protection

Device

Installation

Operation and

Maintenance

Manual

TEL:800-604-9980 www.SurgePack.com

Total Protection Solutions, LLC.

P.O. Box 340

Winter Park, FL 32709

Tel: 800.647.1911 - www.TPSurge.com

CAUTION—IMPORTANT SAFETY INFORMATION

ƔNever install communication wiring during alightning storm.

ƔThis product is for INDOOR USE ONLY.

ƔThe below suppressors are intended for use as protectors for low voltage signal, data and communica-

tion lines.

ƔRead and understand all instructions prior to installation and operation.

INSTALLATION

TK-CT2-DB9, TK-CT2-CAT6, TK-CT2-CAT6-POE & TK-CT2-AmpPro

1.Connect the Load (protected) Side of the TK-CT2 Series product to your communications equipment.

2. Connect your incoming (unprotected) communication cable to the Line (exposed) Side of the TK-CT2

Series product.

3. Connect an AWG # 14ground wire from the unit's ground stud and secure it to the nearest available

chassis ground.

GROUNDING

The unit’s ground lug must be connected to the ground reference used by the system being protected. In

some environments, this ground point may be the ground bar in the AC power panel or low voltage

equipment electrical ground. Ground leads should not exceed 12inches.

PERFORMANCE NOTE

The grounding conductor must be as short as possible. Minimize length to the cm/inch using amini-

mum wire size of 14AWG.

NO INDEPENDENT GROUNDS

Surge devices must not be connected to ground points that are independent of AC ground.

MOUNTING INFORMATION

Aground lug is provided with each unit and can accommodate up to #10AWG ground wire.

ENCLOSURE DIMENSIONS

Case A : 2.885”Hx2.130”Wx1.130”D

Case B : 4.375”Hx2.885”Wx1.230”D

TK-CT2-DB9 CASE A(2.885”Hx2.130”Wx1.130”D)

TK-CT2-CAT6CASE B(4.375”Hx2.885”Wx1.230”D)

TK-CT2-CAT6-POE CASE B(4.375”Hx2.885”Wx1.230”D)

TK-CT2-AmpPro CASE B(4.375”Hx2.885”Wx1.230”D)

NOTE: The protected device/equipment should also have AC protection because it is still vulnerable

to transients on the power lines. Omitting AC protection poses acontinued threat of failures at the com-

munication interface.

INSTALLATION CONTINUED

COMTRACK™ INSTALLATION, OPERATION AND MAINTENANCE MANUAL COMTRACK™ INSTALLATION, OPERATION AND MAINTENANCE MANUAL

DIN RAIL (2.28”H x 3.94”W x 1.4”D)

Note: It is always best to to test grounds to verify their existence be-

fore relying on them to protect sensitive equipment.

For installation in high moisture environments, add suffix "-C" to model number when

ordering. This will add a conformal coating to the SPD circuit board to help protect against

corrosion over time.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Total Protection Solutions Überspannungsschutz Handbücher

Total Protection Solutions

Total Protection Solutions ComTrack TK-CT2-190TLP4-RJ-T1/E1-C Bedienungsanleitung

Total Protection Solutions

Total Protection Solutions 80 Bedienungsanleitung

Total Protection Solutions

Total Protection Solutions 200 Bedienungsanleitung

Total Protection Solutions

Total Protection Solutions LoadTrack TK-LTL120P-30A Bedienungsanleitung

Total Protection Solutions

Total Protection Solutions ComTrack TK-CT2-PHONE-RJ Handbuch

Total Protection Solutions

Total Protection Solutions 80 Bedienungsanleitung

Total Protection Solutions

Total Protection Solutions ServiceTrack ST 080 Bedienungsanleitung

Total Protection Solutions

Total Protection Solutions TK-CT2-190TLP1-TB Bedienungsanleitung

Total Protection Solutions

Total Protection Solutions 160 Bedienungsanleitung

Total Protection Solutions

Total Protection Solutions LoadTrack LTE AC Series Bedienungsanleitung

Beliebte Überspannungsschutz Handbücher anderer Marken

ELAC

ELAC ProteK PR91-W Bedienungsanleitung

Tsubaki

Tsubaki TSM4000M1 Bedienungsanleitung

QVS

QVS PP134C Bedienungsanleitung

CyberPower

CyberPower CSP604T Bedienungsanleitung

Davis Instruments

Davis Instruments Radio Surge Protector Bedienungsanleitung

M-system

M-system MGA-100 Bedienungsanleitung

CyberPower

CyberPower CSP706T Bedienungsanleitung

CyberPower

CyberPower B300WRC1 Bedienungsanleitung

M-system

M-system MGD-24 Bedienungsanleitung

Leviton

Leviton 51120-3R Bedienungsanleitung

Panamax

Panamax MAX 5400-EX Bedienungsanleitung

CyberPower

CyberPower B1006T Bedienungsanleitung

OBO Bettermann

OBO Bettermann ÜSM-20-230I1PE65 Bedienungsanleitung

Minuteman

Minuteman MMS7120RCT Bedienungsanleitung

Leviton

Leviton 52412-DS3 Bedienungsanleitung

Savio

Savio LZ-07 Bedienungsanleitung

Siemens

Siemens HNM3M120 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric LITOL LTM-125RF Bedienungsanleitung