TotalPond MD11130 Bedienungsanleitung

ITEM # MD11130

Submersible Fountain Pump

130 Gallons Per Hour

PACKAGE CONTENTS

WARNINGS AND CAUTIONS

WARNING

•Risk of electrical shock. This pump is supplied with a grounding conductor and grounding–type

attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly

grounded, grounding- type receptacle (GFCI).

•Do not exceed the voltage shown on the pump.

•Always disconnect pump from the power source before beginning any maintenance or work on the

pump.

•Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly if

damage is found.

•Do not remove the grounding pin from the power cord plug.

•To reduce the risk of electric shock, use only on portable, self-contained fountains no larger than 5 ft. in

any dimension.

•Risk of electrical shock – This pump has not been investigated for use in swimming pool or marine

areas.

CAUTION

•This pump has been evaluated for use with fresh water only.

•Use a proper power source as indicated on the pump label.

•Keep the cord away from high temperatures or other heat sources.

•Avoid using the pump when water temperatures fall below 41° F.

•Do not use the pump in water exceeding 86° F.

•Do not pump heated liquids.

•Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.

•Operate in freshwater only. Avoid heavily chlorinated water and water with high pH levels.

•Do not lift the pump by its power cord.

Part Description Quantity

A Pump 1

B 3/8 in. ID tubing adaptor 1

C 1/2 in. ID tubing adaptor 1

Questions, problems, missing parts? Before returning

to your retailer, call our customer service department at

1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or

email us at customercare@geoglobalpartners.com. Or

visit our website www.total-pond.com.

REMINDER

CALL 1-888-412-6001

BEFORE RETURNING TO STORE.

PREPARATION

Before beginning assembly or operation of product, make sure all parts are present. Compare parts with

package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,

install or operate the product. Contact customer service for replacement parts.

•Estimated Assembly Time: 5 minutes

•No tools required for assembly.

ASSEMBLY INSTRUCTIONS

1. Connect tubing to the outlet of the pump with the appropriate

adapter. Fig 1

NOTE: Tubing is NOT INCLUDED.

Fig. 1

2. Place the pump into the water and connect to a proper power

source. Fig. 2

Fig. 2

CARE AND MAINTENANCE

•Regular cleaning of the pump may be necessary depending upon the environment in which it is

operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.

•Before cleaning, always disconnect the pump from the power source.

•Remove all parts from the pump and clean in warm, soapy water.

•Disassemble the pump housing and remove the impeller housing to expose the impeller assembly.

Remove the impeller assembly by gently pulling on the impeller blades. Use a soft cloth or brush

to clean the impeller assembly and the inside of the impeller housing.

TROUBLESHOOTING

If the pump fails to operate:

•Check to make sure the power cord is plugged in and the pump is getting power.

•Check the pump outlet and any tubing, fountains, spitters etc. for kinks or obstructions.

•Remove the inlet screen and/or pump cover, and impeller housing to expose the impeller. Turn

the impeller to ensure that it is not broken or jammed.

If the performance of the pump is not satisfactory or the pump does not flow evenly:

•Check to make sure the pump is completely submerged in water.

•Check to make sure the impeller and the housing are clean.

•Adjust flow control.

Pump

Tubing

GFCI

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department

at 1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday.

PUMP PERFORMANCE

Printed in China

Part Description

B Adapter for 3/8 in. ID tubing

C Adapter for 1/2 in. ID tubing

D Flow control knob

E Front cover

F Impeller cover

G Impeller assembly

Flow Rate (GPH)

8’ 86

7’ 144

6’ 67 191

5’ 126 241

4’ 167 311

3’ 60 212 386

2’ 32 101 254 442

1’ 66 129 308 506

Lift (feet)

0’ 92 163 363 584

MD11060 MD11130 MD11300 MD11500

Pumps

Inhaltsverzeichnis

Andere TotalPond Wasserpumpe Handbücher

TotalPond

TotalPond MD11400ASL Bedienungsanleitung

TotalPond

TotalPond 52322 Bedienungsanleitung

TotalPond

TotalPond 36139 Bedienungsanleitung

TotalPond

TotalPond MD11500 Bedienungsanleitung

TotalPond

TotalPond MD11170AS Bedienungsanleitung

TotalPond

TotalPond 52224 Bedienungsanleitung

TotalPond

TotalPond MD11300 Bedienungsanleitung

TotalPond

TotalPond 52217 Bedienungsanleitung

TotalPond

TotalPond 52321 Bedienungsanleitung

TotalPond

TotalPond 52325 Bedienungsanleitung

TotalPond

TotalPond 52213 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung