TP-Link TL-PA4025P Kit Bedienungsanleitung
7106507904 REV2.1.1
TP-Link Technologies Co., Ltd.
Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link
Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of
their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from TP-Link
Technologies Co., Ltd. Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.
MADE IN CHINA
Quick Installation Guide
Powerline Adapter
TP-Link Technologies Co., Ltd. South Building(floors 1,3,4,5) and 28(floors 1-4), Central Science
& Technology Park, Shennan Rd, Nanshan, Shenzhen, China
TP-Link Deutschland GmbH Robert-Bosch-Straße 9, 65719 Hofheim am Taunus, Germany
TP-Link UK Limited Unit 2 & 3 Riverview (142-144), Cardiff Road, Reading, RG1 8EW
TP-Link Italia S.r.l. Via Gobetti 2/A 20063 Cernusco sul Naviglio (MI)
TP-Link France SARL 16-18 avenue Morane Saulnier, 78140 Vélizy-Villacoublay, France
TPLink Bilgi Teknolojileri Tic. Ltd. Şti. Şerifali Mevkii, Barbaros Cad. Söyleşi Sokak. No:15/2 Kat:3/4
34775 Ümraniye/İstanbul
TP-Link IBERIA, S.L. Calle Quintanavides 17, 3ºE, 28050 Madrid, Spain
TP-Link Netherlands B.V. Archimedesbaan 18, 3439 ME Nieuwegein
TP-Link (Nordic) AB Forumvägen 14, Plan 13, 131 53 Nacka, Sweden
TP-Link Hellas Ltd. Marathonodromou 77, Marousi 151 24, Greece
NWS.TP-Link Portugal, Unipessoal, Lda. Avenida da Liberdade, n°245, 7°E, 1250-143 Lisboa, Portugal
English
5
Plug and Play
1. Connect one adapter to a LAN port of your router using an Ethernet cable.
2. Plug the other adapter into the wall outlets on the same electrical circuit.
3. Wait until the Powerline LED on any adapter turns on.
4. Connect your computer to the adapter using an Ethernet cable.
5. Enjoy!
More: To add additional Powerline adapters and extenders with the default settings, simply
plug them into the wall outlets on the same electrical circuit.
Internet
WAN LAN
Adapter Adapter
Powerline
English
6
Attention
• Plug the powerline devices directly into the wall outlets but not the power strips.
• For passthrough powerline devices, plug the power strips into the integrated electrical
sockets of the powerline devices.
Secure the Powerline Network with the Pair Button
Tips: We recommend that you plug in the powerline devices near each other when pairing.
Set up a secure network:
1Press the Pair button for
1 second on one adapter.
2Within 2 minutes, press the Pair
button for 1 second on another
adapter.
3Done.
A B
Blinking Blinking
On
English
7
If you have more than 2 powerline devices, repeat the steps below on each additional
devices to be configured:
1Press the Pair button for 1
second on any powerline
device in the secure network.
2Within 2 minutes, press the
Pair button for 1 second on the
additional powerline device.
3Done.
A B C
FAQ (Frequently Asked Questions)
Q1. How do I reset my powerline adapter?
A1. With the powerline adapter plugged into to the electrical outlet, press and hold the
Pair button until the Power LED goes off momentarily and comes back on.
A2. Use the tpPLC Utility to reset the powerline adapter.
Blinking Blinking On
Secure Network
English
8
Q2. How to troubleshoot if there is no internet connection in my powerline
network?
A1. Make sure all powerline devices are on the same electrical circuit.
A2. Make sure all Powerline LEDs are on. If not, pair your adapters and extenders again.
A3. Make sure all hardware connections are correctly and securely connected.
A4. Check if you have an internet connection by connecting the computer directly to the
modem or router.
A5. Make sure your computer’s IP address is in the same segment as your router’s.
Q3. What can I do if a successfully-paired powerline device does not
reconnect after it has been moved to a new location?
A1. Try another socket and make sure it is on the same electrical circuit.
A2. Try to pair it again, and make sure the Powerline LED is on.
A3. Check for possible interference, such as a washer, air conditioner or other household
appliances that may be too close to one of the powerline devices. Plug the appliance
into the integrated electrical socket (if the powerline device has one) to remove some
electrical noise.
More advanced configurations, such as firmware upgrade and QoS configuration, can be
accessed through the tpPLC Utility. You can install the tpPLC Utility from the TP-Link official
website.
Inhaltsverzeichnis
Andere TP-Link Adapter Handbücher
TP-Link
TP-Link TL-WN725N Bedienungsanleitung
TP-Link
TP-Link Archer TX20U Plus Bedienungsanleitung
TP-Link
TP-Link TL-WN823N Bedienungsanleitung
TP-Link
TP-Link TL-PA251 Bedienungsanleitung
TP-Link
TP-Link TL-WN822N Bedienungsanleitung
TP-Link
TP-Link TL-WN951N - IEEE 802.11b/g 802.11n Draft 2.0 PCI Wireless... Bedienungsanleitung
TP-Link
TP-Link TL-WPA7517 Bedienungsanleitung
TP-Link
TP-Link TL-PA4010P KIT EU Bedienungsanleitung
TP-Link
TP-Link TL-PA7010P Bedienungsanleitung
TP-Link
TP-Link UB500 V1 Bedienungsanleitung
TP-Link
TP-Link Archer T4UH Bedienungsanleitung
TP-Link
TP-Link TL-WN881ND Bedienungsanleitung
TP-Link
TP-Link UB5A Bedienungsanleitung
TP-Link
TP-Link Archer T4UHP Bedienungsanleitung
TP-Link
TP-Link TL-PA101 Bedienungsanleitung
TP-Link
TP-Link TL-PA251 Bedienungsanleitung
TP-Link
TP-Link UB500 Bedienungsanleitung
TP-Link
TP-Link 0152500174 - TL-WN321G 54Mbps 802.11g Wireless LAN USB 2.0... Bedienungsanleitung
TP-Link
TP-Link TL-WN951N - IEEE 802.11b/g 802.11n Draft 2.0 PCI Wireless... Bedienungsanleitung
TP-Link
TP-Link Archer TX20U Plus Bedienungsanleitung
