TP-Link HS200 Bedienungsanleitung

Smart Wi-Fi Light Switch Installation

Important Safety Information

Before installing, servicing, or removing the Smart Switch, read and follow all safety precautions

including the following:

• WARNING: RISK OF ELECTRIC SHOCK OR FIRE. Turn OFF power supply at the circuit breaker or

fuse. Use a non-contact voltage tester to ensure the power is off.

• The Smart Switch must be installed and used in accordance with the National Electric Code (NEC)

or your local electrical code. If you are unfamiliar with these codes and requirements, or are

uncomfortable performing the installation, consult a qualified electrician.

• The Smart Switch is an indoor single-pole switch that requires a neutral connection.

• Do not install the Smart Switch with wet hands or when standing on wet or damp surfaces.

1 Download TP-LINK Kasa from App Store or Google Play.

2 Connect mobile device to your 2.4GHz Wi-Fi network.

Apple and App Store are trademarks of

Apple Inc., registered in the U.S. and

other countries.

Android and the Google Play logo are

trademarks of Google Inc.

3 Launch Kasa and follow the wiring steps provided, then connect the

Smart Switch to your home network.

Quick Start Guide

HS200

7106506280 REV 1.0.0

Sketch9:41 AM 100%

Before we start

Have you already wired up your

Smart Switch?

NOT YET

Yes, I have

Create Account

Skip

Forgot password?

Password

Welcome

home

Sketch9:41 AM 100%

Start the con guration

Locate the reset button below the

switch on the left.

Press and hold for 5 seconds until the

Wi-Fi light blinks amber and green.

RESET

scan QR

code

Note: The Smart Switch

only supports 2.4GHz

networks.

If you encounter any issues during installation or configuration, please visit

www.tp-link.com/support for web support and troubleshooting information.

Smart Wi-Fi Light Switch

Troubleshooting

Support

Blinking Amber and Green: App-Config mode initiated.

Green: Successfully connected to the Wi-Fi network.

Blinking Amber: Resetting or during firmware update.

Red: No Wi-Fi connection.

White: Lit up when the light is switched OFF to show the

Smart Switch location in the dark.

Press to reboot the Smart Switch.

Press and hold (about 5 seconds) until the Wi-Fi status LED

blinks amber and green alternately to initiate App-Config

mode.

Press and hold (about 10 seconds) until the Wi-Fi status LED

blinks green rapidly to factory reset the Smart Switch.

1. What should I do when I can’t turn the Smart Switch on/off manually?

If the Smart Switch doesn’t respond when pressing the physical switch:

•Make sure that you restore power to the Smart Switch at the circuit breaker.

•Make sure the Smart Switch is wired correctly. Please consult with a

qualified electrician.

2. What should I do when the Smart Switch won’t respond to commands or

scheduled automations?

•Check your network connectivity.

• Check if the Wi-Fi status LED on the Smart Switch is lit green. If it is amber or

blinking amber and green, reconnect the Smart Switch to your Wi-Fi network.

• Do not use a metal faceplate with the Smart Switch to prevent Wi-Fi signal

interference.

• Power cycle your router and/or reboot the Smart Switch by pressing the

RESTART button underneath the switch.

•Factory reset the Smart Switch by pressing and holding the RESET button.

You’ll need to reconfigure the Smart Switch again.

RESET

RESTART

Andere Handbücher für HS200

Inhaltsverzeichnis

Andere TP-Link Schalten Handbücher

TP-Link

TP-Link TL-SG2424P Bedienungsanleitung

TP-Link

TP-Link TL-SG1008D Bedienungsanleitung

TP-Link

TP-Link JetStream TL-SL5428E Bedienungsanleitung

TP-Link

TP-Link Tapo S210 Bedienungsanleitung

TP-Link

TP-Link TL-SG108E Bedienungsanleitung

TP-Link

TP-Link Tapo H100 Bedienungsanleitung

TP-Link

TP-Link Jetstream Series Bedienungsanleitung

TP-Link

TP-Link TL-SG2200 Bedienungsanleitung

TP-Link

TP-Link TL-SG105 Bedienungsanleitung

TP-Link

TP-Link JetStream L2 Lite TL-SG3210 Bedienungsanleitung

TP-Link

TP-Link TL-SX105 Bedienungsanleitung

TP-Link

TP-Link JetStream TL-SL5428E Bedienungsanleitung

TP-Link

TP-Link SG6654X Bedienungsanleitung

TP-Link

TP-Link tapo S505D Bedienungsanleitung

TP-Link

TP-Link T2500G-10MPS Bedienungsanleitung

TP-Link

TP-Link 24+2/24+2G Bedienungsanleitung

TP-Link

TP-Link DS108GE Bedienungsanleitung

TP-Link

TP-Link TL-SF1008P Installationsanleitung

TP-Link

TP-Link HS100 Bedienungsanleitung

TP-Link

TP-Link JetStream TL-SL3452 Bedienungsanleitung

TP-Link

TP-Link TL-SL3226P Bedienungsanleitung

TP-Link

TP-Link JetStream T1500-28TC Bedienungsanleitung

TP-Link

TP-Link TL-SL1218P Bedienungsanleitung

TP-Link

TP-Link TL-SF1005D Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung