TP-Link T2500G-10MPS Bedienungsanleitung

Business Networking Solution

Installation Guide

JetStream Gigabit L2 Managed Switch

T2500G-10TS (TL-SG3210)

T2500G-10MPS

Related Document

Contents

Chapter 1 Introduction ——————————— 01

1.1 Product Overview......................................................01

1.2 Appearance .................................................................01

Chapter 2 Installation———————————— 07

2.1 Package Contents.....................................................07

2.2 Safety Precautions....................................................07

2.3 Installation Tools ........................................................09

2.4 Product Installation...................................................09

Chapter 3 Lightning Protection ——————— 11

3.1 Cabling Reasonably ..................................................11

3.2 Connect to Ground ..................................................13

Chapter 4 Connection ——————————— 16

4.1 Ethernet Port...............................................................16

4.2 SFP Port ........................................................................16

4.3 Console Port................................................................16

4.4 Verify Installation .......................................................17

4.5 Power On .....................................................................18

4.6 Initialization ..................................................................18

Chapter 5 Conguration —————————— 19

5.1 Congure the Switch via GUI.................................19

5.2 Congure the Switch Using CLI ...........................20

Appendix A Troubleshooting ———————— 23

Appendix B Hardware Specications ————— 25

Gigabit L2 Managed Switch

Introduction

Chapter 1 Introduction

1.1 Product Overview

TP-Link JetStream Gigabit L2 Managed Switch, designed for workgroups and

departments, provides wire-speed performance and abundant layer 2 management

features. It provides a variety of service features and multiple powerful functions

with high security.

The EIA-standardized framework and smart configuration capacity can provide

flexible solutions for a variable scale of networks. ACL, 802.1x and Dynamic ARP

Inspection provide robust security strategies. QoS and IGMP snooping/filtering

optimize voice and video application. Link aggregation (LACP) increases aggregated

bandwidth, optimizing the transport of business critical data. SNMP, RMON, WEB

and CLI Log-in bring abundant management policies. TP-Link JetStream Gigabit L2

Managed Switch integrates multiple functions with excellent performance, and is

friendly to manage, which can fully meet the need of the users demanding higher

networking performance.

T2500G-10MPS L2 Managed PoE+ Switch is also a Power Sourcing Equipment (PSE*).

All the RJ45 ports on the switch support Power over Ethernet (PoE*) function, which

can automatically detect and supply power with those powered devices (PDs*)

complying with IEEE 802.3af and IEEE 802.3at.

*PSE: a device (switch or hub for instance) that provides power through an Ethernet

cable.

*PoE: This technology describes a system to transmit electrical power, along with

data, to remote devices over standard twisted-pair cable in an Ethernet.

*PD: a device powered by a PSE and thus consumes energy. Examples include

powering network cameras, wireless LAN access points, IP telephones, network

hubs, embedded computers etc.

1.2 Appearance

■Front Panel

The front panel of T2500G-10TS is shown as the following figure.

Figure 1-1 Front Panel of T2500G-10TS

LEDs

Console Port (USB)

SFP Port

10/100/1000Mbps RJ45 Port

Console Port (RJ-45)

Gigabit L2 Managed Switch

Introduction

LEDs

LED Status Indication

PWR

On The switch is powered on

Off The switch is powered off or power supply is

abnormal

Flashing Power supply is abnormal

SYS Flashing The switch works properly

On/Off The switch works improperly

10/100/1000M

Green A 1000Mbps device is linked to the corresponding

port, but no activity

Yellow A 10/100Mbps device is linked to the corresponding

port, but no activity

Flashing Data is being transmitted or received

Off Not linked

SFP1, SFP2

On A 1000Mbps device is linked to the corresponding

port, but no activity

Flashing Data is being transmitted or received

Off Not linked

Console (RJ-45) Port

Designed to connect with the serial port of a computer or terminal for monitoring

and configuring the switch.

Console (USB) Port

Designed to connect with the USB port of a computer for monitoring and

configuring the switch. The switch has an RJ-45 console port and a micro-USB

console port available. Console input is active on only one console port at a

time. By default, the micro-USB connector takes precedence over the RJ-45

connector.

10/100/1000Mbps RJ45 Port

Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps

or 1000Mbps. Each 10/100/1000Mbps RJ45 port has a corresponding

10/100/1000M LED.

SFP Port

Designed to install the SFP module. T2500G-10TS features 2 individual SFP ports

and supports 1000M SFP module connection only.

Gigabit L2 Managed Switch

Introduction

The front panel of T2500G-10MPS is shown as the following figure.

Figure 1-2 Front Panel of T2500G-10MPS

LEDs

Console Port (USB)

SFP Port

10/100/1000Mbps RJ45 Port

Console Port (RJ-45)

LED Mode Switch Button

LEDs

T250 0 G -10 M PS has an LED mode switch button which is for switching the LED

status indication. When the Speed LED is on, the port LED is indicating the data

transmission status. When the PoE LED is on, the port LED is indicating the power

supply status. By default, the Speed LED is on. Pressing the mode switch button,

the Speed LED will turn off and the PoE LED will light up. Then the PoE LED will

turn off after being on for 60 seconds and the Speed LED will light up again.

When the Speed LED is on, the port LED is indicating the data transmission

status.

LED Status Indication

PWR

On The switch is powered on

Off The switch is powered off or power supply is

abnormal

Flashing Power supply is abnormal

SYS Flashing The switch works properly

On/Off The switch works improperly

FAN

Green All the fans work properly

Yellow Not all the fans work properly

Off The switch works improperly

PoE MAX

On The remaining PoE power≤7W

Flashing The remaining PoE power keeps ≤7W after this

LED is on for 2 minutes

Off The remaining PoE power>7W

Speed or PoE

Green On A 1000Mbps device is connected to the

corresponding port, but no activity

Flashing Data is being transmitted or received

Yellow On A 10/100Mbps device is connected to the

corresponding port, but no activity

Flashing Data is being transmitted or received

Off No device is connected to the corresponding port

Gigabit L2 Managed Switch

Introduction

LED Status Indication

SFP1, SFP2

Green On A 1000Mbps device is connected to the

corresponding port, but no activity

Flashing Data is being transmitted or received

Yellow On A 100Mbps device is connected to the

corresponding port, but no activity

Flashing Data is being transmitted or received

Off No device is connected to the corresponding port

When the PoE LED is on, the port LED is indicating the power supply status.

LED Status Indication

PWR

On The switch is powered on

Off The switch is powered off or power supply is

abnormal

Flashing Power supply is abnormal

SYS Flashing The switch works properly

On/Off The switch works improperly

FAN

Green All the fans work properly

Yellow Not all the fans work properly

Off The switch works improperly

PoE MAX

On The remaining PoE power≤7W

Flashing The remaining PoE power keeps ≤7W after this

LED is on for 2 minutes

Off The remaining PoE power>7W

Speed or PoE

Green

On The port is supplying power normally

Flashing The supply power exceeds the corresponding

port's maximum power

Yellow On Overload or short circuit is detected

Flashing Power-on self-test has failed

Off No PoE power supply is provided on the port

SFP1, SFP2

Green On A 1000Mbps device is connected to the

corresponding port, but no activity

Flashing Data is being transmitted or received

Yellow On A 100Mbps device is connected to the

corresponding port, but no activity

Flashing Data is being transmitted or received

Off No device is connected to the corresponding port

Console (RJ-45) Port

Designed to connect with the serial port of a computer or terminal for monitoring

and configuring the switch.

Console (USB) Port

Designed to connect with the USB port of a computer for monitoring and

configuring the switch. The switch has an RJ-45 console port and a micro-USB

console port available. Console input is active on only one console port at a

time. By default, the micro-USB connector takes precedence over the RJ-45

connector.

Gigabit L2 Managed Switch

Introduction

10/100/1000Mbps RJ45 Port and PoE Port

Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or

1000Mbps. Each has a corresponding Speed or PoE LED.

SFP Port

Designed to install the SFP module. T2500G-10 MP S features 2 SFP transceiver

ports.

■Rear Panel

The rear panel of T2500G-10TS is shown as the following figure.

Figure 1-3 Rear Panel of T2500G-10TS

Grounding Terminal

Power Socket

Kensington Security Slot

Secure the lock (not provided) into the security slot to prevent the device from

being stolen.

Grounding Terminal

The switch already comes with lightning protection mechanism. You can also

ground the switch through the PE (Protecting Earth) cable of AC cord or with

Ground Cable. For detailed information, please refer to Chapter 3 Lightning

Protection.

Power Socket

Connect the female connector of the power cord here, and the male connector to

the AC power outlet. Please make sure the voltage of the power supply meets the

requirement of the input voltage (100-240V~ 50/60Hz).

The rear panel of T2500G-10MPS is shown as the following figure.

Figure 1-4 Rear Panel of T2500G-10MPS

Power Socket

Grounding Terminal

Kensington Security Slot

Secure the lock (not provided) into the security slot to prevent the device from

being stolen.

Gigabit L2 Managed Switch

Introduction

Grounding Terminal

The switch already comes with lightning protection mechanism. You can also

ground the switch through the PE (Protecting Earth) cable of AC cord or with

Ground Cable. For detailed information, please refer to Chapter 3 Lightning

Protection.

Power Socket

Connect the female connector of the power cord here, and the male connector to

the AC power outlet. Please make sure the voltage of the power supply meets the

requirement of the input voltage (100-240V~ 50/60Hz).

Caution: Please use the provided power cord.

Andere Handbücher für T2500G-10MPS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TP-Link Schalten Handbücher

TP-Link

TP-Link HS200 Bedienungsanleitung

TP-Link

TP-Link HS200 Bedienungsanleitung

TP-Link

TP-Link T2500G-10TS Bedienungsanleitung

TP-Link

TP-Link UH700 Bedienungsanleitung

TP-Link

TP-Link TL-SG108PE Bedienungsanleitung

TP-Link

TP-Link JetStream TL-SG2210P Bedienungsanleitung

TP-Link

TP-Link TL-SG1008D Bedienungsanleitung

TP-Link

TP-Link JetStream L2 Lite TL-SG3210 Bedienungsanleitung

TP-Link

TP-Link TL-SF1016D Bedienungsanleitung

TP-Link

TP-Link TL.SFI OOSD Bedienungsanleitung

TP-Link

TP-Link TL-SF1005D Bedienungsanleitung

TP-Link

TP-Link DS108GE Bedienungsanleitung

TP-Link

TP-Link TL-SG108PE Bedienungsanleitung

TP-Link

TP-Link TL-SG1008P Bedienungsanleitung

TP-Link

TP-Link TL-SL2218 Bedienungsanleitung

TP-Link

TP-Link Tapo S500 Bedienungsanleitung

TP-Link

TP-Link TL-SG108 Bedienungsanleitung

TP-Link

TP-Link TL-SG3452XP Bedienungsanleitung

TP-Link

TP-Link JetStream T1600G-28TS Bedienungsanleitung

TP-Link

TP-Link JetStream T2600G-28TS Bedienungsanleitung

TP-Link

TP-Link JetStream TL-SG2210P Bedienungsanleitung

TP-Link

TP-Link TL-SL1218MP Bedienungsanleitung

TP-Link

TP-Link TL-SX105 Bedienungsanleitung

TP-Link

TP-Link JetStream TL-SG2008 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung