TP-Link TL-WR902AC Bedienungsanleitung

Wireless Bridge Quick Start Guide

This device is for the purpose of connecting a FlexRadio to a wireless network when it is not

possible to connect the radio directly to the router with a physical cable.

Package Includes:

WR-902AC Wi-F Travel Router

RJ45 Ethernet Cable

Power Adapter

Quick Start Guide

USB Cable

This package is sold as a convenience option for FlexRadio owners.

Note: FlexRadio does not provide support for this device. This product is sold 'as is'. Please

contact the manufacturer for support if needed.

WiFi data connect speeds can vary for each installation. Your WiFi performance can be

impacted by not only the users in your own home, but also by your neighbors WiFi. WiFi

connections are shared by over a common radio frequency and can affect streaming radio data.

WiFi that is heavily used may impact the performance of your Flex 6000 series radio. Users of

this device should expect occasional dropouts which can result in disconnecting from the radio

when operating over SmartLink. FlexRadio is not responsible for the performance of this device.

It is highly recommended that a hard wired LAN connection be used and to have your radio

connected to your home LAN.

We realize that this is not always possible and provide this as a possible solution. Please

review:

https://helpdesk.flexradio.com/hc/en-us/articles/203469425-Reasons-for-Wireless-Network-Perf

ormance-Problems

Setup Instructions

1. Set hub to “AP/Rng Ext/Client” setting on the side of the device

2. Plug in the device using supplied AC plug and USB adapter cord

3. On your smart phone select the wifi device “TP-Link_XXXX”. The XXXX will be a series

of unique letters and numbers.

a. If you wish to do this from a computer or a laptop, then open your WiFi settings

on your computer and connect to the TP-Link_XXXX WiFI point.

4. Enter the wifi password listed under the 2nd barcode



on the back of your device. The

number in the picture below is just a sample. Your number will be different.

a. This is a temporary connection, so you do not want to remember this access

point name and password if you are asked.

5. Once connected, use a browser on your smart phone open a Web Browser and go to:

http://tplinkwifi.net

6. Enter the user name and password (all lower case) as shown below and press Log in:

USER: admin

PW: admin

7. On the next screen click “Wizard” to begin the setup process (do not click on Operational

Mode)

8. Select “Client” as the “Operation Mode” - Click Next

9. On the following screen locate the wifi router id you will be using by hitting SCAN. (This

is NOT the tp-link router, this is your personal WiFi network) and click the “Connect” link

at the far right of the table. This will prompt you to enter your wifi password. You may

see many WiFI access points, so make sure you pick the same WiFi access point you

use for your home.  (Note: the names on this screen are examples)

10. On the following screen make sure the LAN Type is set to “Smart IP(DHCP)”. Leave the

IP Address and Subnet Mask fields blank. Make sure DHCP button does look like it is

set to Enable, but in fact, it is greyed out so you can leave it as is.

11. Click Next

12. The next screen will give you a “Congratulations” message. Confirm the settings and

click “Finish” at the bottom of the page.

13. After it completes the reboot process and YOUR RADIO IS POWERED OFF



, connect

the ethernet cable from your radio to the TP Link Hub. Also, make sure that you do

provide power to the TP-LINK adapter in case you needed to move the TP-Link bridge to

a new location. Use the supplied cables and power adapter.

14. Power up your FlexRadio

15. You radio should now be available on your home wireless wireless network. You can

test this by starting SmartSDR on a PC or Maestro that is connected to your home

network.

Notes:

● The Radio IP address in SmartSDR/Maestro of the front panel will show a value similar

to your home network, as example, 192.168.1.xxx when you are successfully connected

to your home WiFi.

● Your Network health indicator may show

a varying level of quality. This is to be

expected when you do use WiFi as your

LAN path. Please review the SmartSDR

Users Guide for details on Network

Health Indicator.

● If when start SmartSDR and you do not see your radio on your network, then it is

possible that the ‘TP-Link Bridge’ did not correctly connect to your WiFi. The quickest

resolution is to Reset the TP-Link Bridge by pushing in the Reset button for 5 seconds

with the power applied to the TP-Link Bridge. Once TP-Link Bridge has restarted, start

at the above from Step 1 and double check all your steps.

Note: FlexRadio does not provide support for this device. However, if you follow the directions

carefully, you should have no issue connecting your Flex 6000 radio to your home WiFi.

WiFi data connection speeds can vary for each installation. Your WiFi performance can be

impacted not only the users in your own home, but also by your neighbours WiFi. WiFi

connections are shared by over a common radio frequency. WiFi that is heavily used

(streaming video) may impact the performance of your Flex 6000 series radio. It is highly

recommended that a hard wired LAN connection be used and to have your radio connected to

your home LAN.

We realize that this is not always possible and provide this as a possible solution.

Andere Handbücher für TL-WR902AC

Inhaltsverzeichnis

Andere TP-Link Drahtloser Zugangspunkt Handbücher

TP-Link

TP-Link Auranet Bedienungsanleitung

TP-Link

TP-Link Auranet EAP225 Bedienungsanleitung

TP-Link

TP-Link AP500 Bedienungsanleitung

TP-Link

TP-Link TL-WA901N Bedienungsanleitung

TP-Link

TP-Link TL-WA901N Bedienungsanleitung

TP-Link

TP-Link TL-WA7210N Betriebsanleitung

TP-Link

TP-Link Auranet EAP120 Kurzanleitung

TP-Link

TP-Link Deco X50-PoE Bedienungsanleitung

TP-Link

TP-Link Auranet EAP115 Bedienungsanleitung

TP-Link

TP-Link TL-WA801ND Bedienungsanleitung

TP-Link

TP-Link AURANET CAP300-Outdoor Bedienungsanleitung

TP-Link

TP-Link Omada Pro Bedienungsanleitung

TP-Link

TP-Link AURANET EAP110-Outdoor Bedienungsanleitung

TP-Link

TP-Link TL-WA801ND Bedienungsanleitung

TP-Link

TP-Link Pharos CPE210 Bedienungsanleitung

TP-Link

TP-Link omada OC200 Bedienungsanleitung

TP-Link

TP-Link Omada Pro AP9670 Bedienungsanleitung

TP-Link

TP-Link TL-WA7210N Bedienungsanleitung

TP-Link

TP-Link Auranet EAP115 Bedienungsanleitung

TP-Link

TP-Link EAP265 HD Bedienungsanleitung

TP-Link

TP-Link TL-WA701ND Bedienungsanleitung

TP-Link

TP-Link AP200 Bedienungsanleitung

TP-Link

TP-Link Auranet EAP115-Wall Bedienungsanleitung

TP-Link

TP-Link Omada EAP115-Wall Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung