Tradetested GS511-V1 Montageanleitung

GS511-V1

GARDEN SHED OWNER’S MANUAL

AND ASSEMBLY INSTRUCTIONS

GARDEN SHED OWNER’S MANUAL

overall size: 3270 x 4590 x 2150mm

shed size: 3070 x 4590 x 2100mm

door size 1: 740 x 1750mm

door size 2: 1480 x 1750mm

floor size: 3030 x 4550mm

3270

1650

1800

4590

740 410

2150

3070

380

Before You Begin

● Check local building codes regarding shed location and any other local requirements.

● Check the packing list on page iv to make sure you have all of the necessary parts.

● Separate everything in the cartons by the part number while reviewing the parts list.

● Be sure the day you select to build your shed is dry and calm.

●Whenever possible, two or more people should work together to assemble the shed.

We suggest that one person positions parts while the other handles the fasteners and tools.

Before assembly, decide on a location for your building. We recommend a level area with

good drainage. Allow enough space around the building so there’s plenty of room to screw

the panels and then move the different parts into position. Remember to leave plenty of

room for the door to fully open.

● An electric drill/driver

● A Phillips screwdriver

● Gardening or work gloves

● Sealant or caulking gum (optional )

● Step ladder

●Tape measure

Safety First

Safety precautions are important to follow throughout the construction of your building.

●Take care when handling the various pieces of your building since some contain sharp

edges. Please wear work gloves, eye protection and long sleeves when assembling or

performing any maintenance.

● Keep children and pets away from your worksite to avoid distractions and any accidents.

● Never concentrate all your weight on the roof of the structure. When using a step ladder

make sure it’s fully open and on a level surface.

●To avoid any damage, do not attempt to assemble the building on a windy day. The larger

panels can act as sails making construction difficult and unsafe.

You Will Need...

Selecting & Preparing Your Site

Flooring & Foundations

A solid shed starts with a level floor and foundation. This is the single most important factor in making your

shed as watertight and stable as possible. It also makes the assembly process as simple as possible.

We recommend the following foundation options:

OPTION 1 - WOODEN FLOOR

We sell wooden floor kits designedto match your shed. Alternatively you can build your own using H4 treated

bearersandtimber floorboards.

● Build on a compacted and levelled base layer

● Plastic sheeting placed under the wood or concrete will prevent moisture wicking through

● We recommend the foundation is the same size as the footprint of your shed to prevent water ingress

Regardless of which flooring option you choose

OPTION 2 - CONCRETE SLAB

For a more permanent solution, or for large sheds, we recommend a concrete foundation.

Assembly Overview

Step 1: Check all parts against the component list

Step 2: Assemble the rear wall panels

Step 3: Assemble the side wall panels

Step 4: Assemble the front wall panels

Step 6: Assemble the ridge beam

Step 8:

Step 10: Assemble the door

Handy Tips Before You Begin

How to drill rivet holes in panels – Use a 4.2mm drill bit , set your drill clutch to the drill bit icon. Make a

mark where you want to drill and use this to start the hole.

Drilling tek-screws – Drilling tek screws into the panels can sometimes cause the corrugation to buckle

in, making it tricky to get the screw all the way in. An easy fix for this is to place a small block of wood

underneath the corrugation as you drill, providing support for the panel until the screw is all the way in.

Make sure the block is not directly underneath the screw.

How to remove rivets if needed – Don’t worry if you have placed a rivet incorrectly or you need to

adjust a panel, they are easy to remove. Just drill directly through the top of the rivet using the same drill

bit you used to make the hole. This will remove the rivet head, causing the whole rivet to fall out.

OTHER TIPS

●Very Important – make sure you remove metal drill filings to prevent corrosion and scratches.

Removing metal filing andavoiding scratching the shed during assembly will help prevent any

corrosion later on.

● Peeloff partnumber stickersandclean soap/water.

● Use silicone to further weatherproof seals around the shed (not included).

iii

with

Step 5: Constructing the walls and gables

Assemble the roof

Step 7: Assembling the Support square tube

Step 9: Fitting Wall Bracing

ASSEMBLY

INSTRUCTIONS

iii

14 W180

Front Wall 410 x 1800

28 W180

Rear Wall 410 x 1800

324 P165

Roof Panel 410 x 1650

422 W180410 x 1800

4 U155Rear Wall Channel

12 U155

Side Wall Channel 1550

6U155

Roof Channel 1550

4G165

Roof Channel 1650

4U155

Front

Wall Channel 1550

2ML180Left Door Frame 1800

2MR180Right Door Frame

1 Z148

Door Top Frame 1480

1 U148

1480

Door Bottom Frame

ITEM QTY PART #NAME SIZE (mm)

PARTS LIST

GS511-V1

STEP 1 Check all parts against the component list

If you’re missing anything, just head to the Trade Tested website and get in touch.

Corner Anchor 4

Hook Anchor 8

Tek Screws 450

Wood Anchor Screws 10

Rivet 230

Corner Cover 4

Spacer 230

Rivet Gun 1

Tek Screwdriver Bit 1

1800

φ4.2 Drill Bit 1

Screw Head Sheath 150

Phillips Head Screws 26

1550

Side Wall

Please check your contents prior to starting assembly

Z111

E175 x 410

E175 x 350

U074

U175

D173

H074

DOOR PART

QTY PART #

SIZE (mm)

410 x 1750

350 x 1750

740

1750

1730

740

1110

ITEM

NAME

Door Panel

Door Channel

Door Square tube

Door Bar

Door Brace

Bolt（door outside）

Hinge

Bolt（door outside）

Hinge

52 1

Bolt（door inside）Bolt（door inside）

2C190Ridge Beam

2 F153

Gables 1530 2B153

Gables 1530 2 U042

Gables Bracket 420 2 L030(L)

L Bracket LEFT

300 x 120

1900

2 L030(R)

L Bracket RIGHT 300 x 120

40 Plastic Ridge End Cap 2

Bolt and Nut 10

2C115Ridge Beam 1150

3V155

Roof Tiles 1550

2C153Ridge Beam 1530

Galvanized square tube

Galvanized square tube 1550

1760

2X155

X176

28 Bracket 8

1 Z0745

Door Top Frame 745

1 U0745

745

Door Bottom Frame

43 Expansion screw（M10x80）6

16 Z130

1300Wall Bracing

STEP 2

Part #W180 x8

The notched end of #U155 and #U079 must

be used at either end of the panel

Out side of shed

In side of Shed

Notched ends

are orientated

to the inside of

the shed

All panels should overlap by one corrugation.

#U155 x4

Lay the wall panels out with the large rib

overlapping the small.

Large Rib Small Rib

Assemble the rear wall panels

All pre-drilled holes should line up with the peaks of the steel sheet. If this varies

squeeze together or stretch out the panels to make sure they line up.

U-channel joint

Drill screw in joint

#U155

Joint outside

Do not add screws to the top and

bottom holes at each end of the panel.

These need to be left undone.

Tek Screw

Screw from the outside in, as per

the pre-drilled holes in the frame.

U-channel joint Drill screw in joint

STEP 3

Assembling the side walls

#W180x22

#U155x12

#W180x12

#U155 #U155

#U155

#W180x12

#U155 #U155

#U155

#MR 180x1

#ML 180x1

#ML180x1

#MR 180x1

Joint inside

#W180x4

#MR 180x1

#ML180

#MR180

STEP 4

Assemble the front wall panels

#ML 180x1

#W180

Tek Screw

All pre-drilled holes should line up with the peaks of the steel sheet. If this varies

squeeze together or stretch out the panels to make sure they line up.

Do not add screws to the top and bottom holes at each end of the panel. These

need to be left undone.

#U0745

#Z0745

Leave the left and right door frames (#MR180, #ML180) un-fastened

at this stage. This will help with any adjustments needed later on.

Once the door positioning is finalised,add the necessary screws.

Fit the top door spacer and the bottom door spacer to

the front wall panel as shown. Some pilot holes may

need to be drilled

Z Z

M M

Bottom

Top

Do not add screws to the top and bottom

holes at each end of the panel. These

need to be left undone.

Leave the left and right door frames (#MR180, #ML180)

un-fastened at this stage. This will help with any adjustments

needed later on. Once the door positioning is finalised,

add the necessary screws.

Tek Screw

#U148x1#Z148x1 #U155x4

#Z148

#U148

#U155

#U155 #U155

#U155

Top

Bottom

Make sure you attach the bottom

frame into the slot frst. Then slide

the base of the door frame inside

the bottom frame.

Make sure that the holes are on the

correct side before fixing in place.

Inhaltsverzeichnis

Andere tradetested Gartenhaus Handbücher

tradetested

tradetested GS510-V1 Montageanleitung

tradetested

tradetested GS507-V1 Montageanleitung

tradetested

tradetested GS501-V1 Bedienungsanleitung

tradetested

tradetested GS503-V1 Bedienungsanleitung

tradetested

tradetested GS506-V1 Montageanleitung

tradetested

tradetested GS503-V1 Bedienungsanleitung

tradetested

tradetested GS505-V1 Bedienungsanleitung

tradetested

tradetested GS512-V1 Montageanleitung

Beliebte Gartenhaus Handbücher anderer Marken

Mercia Garden Products

Mercia Garden Products 0628LOG181-V4 Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5930-6 Installationshandbuch

Gartenhaus-King

Gartenhaus-King Valery Bedienungsanleitung

Rion

Rion Hobby Gardener Bedienungsanleitung

POD

POD Camping 480 Bedienungsanleitung

Select

Select ISAAC E9682 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01DTSHPWOR1010DDOW-V4 Gebrauchsanweisung

Palmako

Palmako Saale Bedienungsanleitung

Lemeks

Lemeks Palmako Kira EL16-3623 Installationshandbuch

Mercia Garden Products

Mercia Garden Products 0644LOG186-V4 Gebrauchsanweisung

Palmako

Palmako Roger FR44-5953-2 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 03DTSHHP1206HGD4MW-V1 Gebrauchsanweisung

WAR-LOCK

WAR-LOCK GARDENSHED Skillion Series Bedienungsanleitung

Pergola kits USA

Pergola kits USA PREMIUM VINYL PAVILION Bedienungsanleitung

G21

G21 Boston 882 Bedienungsanleitung

Lemeks

Lemeks Palmako Grace PM56-4529 Installationshandbuch

Mercia Garden Products

Mercia Garden Products 03WES0808-V1 Gebrauchsanweisung

Shire

Shire Salcey Bedienungsanleitung

tradetested GS511-V1 Montageanleitung

Beliebte Gartenhaus Handbücher anderer Marken