Trane BAYSENS924 Handbuch

Inhaltsverzeichnis

Andere Trane Thermostat Handbücher

Trane

Trane TCONT 800 Series Bedienungsanleitung

Trane

Trane TCONT824 Bedienungsanleitung

Trane

Trane X13511537-01 Bedienungsanleitung

Trane

Trane Thermostats Betriebshandbuch

Trane

Trane 3518-7065 Bedienungsanleitung

Trane

Trane XR102 Bedienungsanleitung

Trane

Trane THT02775 Bedienungsanleitung

Trane

Trane THS-02 Bedienungsanleitung

Trane

Trane Z WAVE TZEMT400AB32MAA Bedienungsanleitung

Trane

Trane TCONT600AF11MA Bedienungsanleitung

Trane

Trane BAC-1000 Bedienungsanleitung

Trane

Trane XR401 Comfort Control Bedienungsanleitung

Trane

Trane TAYSTAT 370 Bedienungsanleitung

Trane

Trane BAYSENS924 Betriebsanleitung

Trane

Trane Thermostats Betriebsanleitung

Trane

Trane TZEMT500AB32MAA Bedienungsanleitung

Trane

Trane TAYSTAT 540 Bedienungsanleitung

Trane

Trane TZONE950AC52ZA Bedienungsanleitung

Trane

Trane TZEMT500AB32MAA Bedienungsanleitung

Trane

Trane Link UX360 Bedienungsanleitung

Trane

Trane X13511537-01 Handbuch

Trane

Trane TCONT800 Series Bedienungsanleitung

Trane

Trane TAYSTAT 375 Bedienungsanleitung

Trane

Trane ComfortLink II XL1050 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung

Trane BAYSENS924 Thermostat

Wendy’s Operator Guide

Intended Audience: Restaurant Operators and Crew

Intended Purpose: Instruct operators on how to use the new Trane thermostat.

The restaurant has a new and improved thermostat providing greater comfort for crew and customers.

This document is based on having the unit programmed and set up by a trained technician or

maintenance staff.

Recommendations:

1. We strongly recommend having a maintenance password set on the thermostats to minimize

the chance of having the thermostat settings changed inadvertently. The maintenance

password controls access to the programming while the manager password controls access to

the temperature override.

2. The operator should determine if they want a manager password for the thermostat to

minimize the temporary overrides that may occur.

3. No programming is needed by the crew once the operating hours are programmed into the unit

by the maintenance team and/or contractor.

4. The thermostat will pre-heat or pre-cool the kitchen and dining room prior to the manager or

first crew member arriving.

5. The thermostat is programmed for night set back based on the drive through closing and

completion of the clean up.

6. The crew can raise or lower the pre-programmed temperature by 3 degrees in the kitchen or

dining room. The HVAC unit will respond and adjust the temperature for a one (1) hour period.

This override time period can be increased or decreased by a simple reprogramming by the

maintenance team.

Trane BAYSENS924 Thermostat

Wendy’s Operator Guide

Manager Thermostat Passcode ___________

A four (4) digit passcode is recommended.

Adjusting Temperature

Enter User Password:

Raise or lower temperature as desired.

Notes:

1. The thermostat restricts raising or

lowering the temperature beyond a set

amount –typically 3F.

2. The thermostat will maintain that

temperature for a set period of time –

typically 60 minutes and revert back to the

standard schedule

Occupied during all hours of operation.

Ensure that thermostat says Occupied during all

hours that the Kitchen is operating.

If the thermostat states Unoccupied during

operating hours, the thermostat needs

adjustment / reprogramming.

For proper operation of the restaurant, the

thermostat must be in the Occupied mode when

the exhaust fans are operating.