Trane TCONT600AF11MA Bedienungsanleitung

OWNER’S GUIDE

TCONT600AF11MA/TCONT602AF22MA

Programmable Comfort Control

Read and save these instructions

Quick Reference Card

Grasp and pull to see basic

operating instructions at a

glance.

Need Help?

For assistance with this product please visit www.trane.com

or call the Customer Assistance Helpline toll-free at 1-800-500-2041.

Battery Holder

Press down and pull to

remove batteries.

Batteries should be

replaced once a year

(see page 17).

CAUTION: EQUIPMENT DAMAGE HAZARD. To prevent possible compressor damage, do

not operate cooling system when outdoor temperature is below 50°F (10°C).

About your new Comfort Control

Control features ..............................2

Programming at a glance ................3

Quick reference to controls............4

Quick reference to display..............5

Programming & Operation

Set time and day..............................6

Select fan setting (auto/on) ............7

Select system setting (heat/cool)......8

Using program schedules................9

Program schedule overrides ........12

Auto-changeover (heat/cool) ........14

Compressor protection ................15

Adaptive Intelligent Recovery™....16

Appendices

Battery installation ........................17

In case of difficulty ......................18

Customer assistance......................20

Accessories/replacement parts ....20

Limited warranty ..........................21

Table of contents

This Comfort Control is ready to go!

Your new Comfort Control is pre-

programmed and ready to go.See

page 3 to check settings.

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not operate

cooling system when outdoor

temperature is below 50°F (10°C).

Congratulations on the purchase of your new Comfort Control. It has been

designed to give you many years of reliable service and easy-to-use, push-button

climate control.

Features

• Separately programmable weekday/weekend schedules.

• One-touch temp control overrides program schedule at any time.

• Energy Star®compliant to greatly reduce your heating/cooling expenses.

•Large, clear, backlit display is easy to read — even in the dark.

• Displays both room temperature and temperature setting.

• Removable battery holder for fast, easy replacement.

• Built-in compressor protection.

About your new Comfort Control

Your new Comfort Control is pre-programmed and ready to go.All you have to do

is set the time and day. Then check the settings below and change if needed:

1Set time and day (required for proper operation)................................See page 6

2Select fan setting (Auto/On): Preset to Auto ......................To change, see page 7

3Select system setting (Heat/Cool): Preset to Heat..............To change, see page 8

4Program schedules: Preset to energy-saving levels

while you’re at work or asleep (assumes you

wake at 6 am, leave at 8 am, return at 6 pm

and go to bed at 10 pm) ..............................................To change, see pages 9-11

ONE-TOUCH TEMPERATURE CONTROL: You can override the program schedule at any

time, and manually adjust the temperature (see pages 12-13).

This Comfort Control is ready to go!

Quick reference to controls

Digital display (see page 5) Battery holder (see page 17)

Temperature buttons

Press to adjust temperature

settings (see page 11-13)

Hold button

Press to override programmed

temperature control (see page 13)

Function buttons

Press to select the function displayed just above each button.

(Functions change depending on the task.)

In Recovery

Auxillary

Heat On

Quick reference to display screen

Current inside temperature Low battery warning

(see page 17)

Current time/day

(see page 6)

Current program period

Wake/Leave/Return/Sleep

(see pages 9-11)

In Recovery

(see page 16) Temperature setting

(see pages 11-13)

System status

Heat On/Cool On

(If flashing, see page 15)

Auxiliary heat

(Only for heat pumps with

auxiliary heat)

Function buttons

Press the button beneath each function to view or change

settings (functions change depending on the task)

System setting

Heat/Cool/Auto/Off/Em

Heat (see page 8)

Fan setting

Auto/On (see page 7)

Set Clock/Day/Schedule

(see pages 6 & 11)

Wed

Done

Set ScheduleSet Day

Set the time and day

1 Press the SET CLOCK/DAY/SCHEDULE

button, then press or to set

the clock time.

2 Press the SET DAY button, then

press or to select the day

of the week.

3 Press DONE to save & exit.

Note: If the SET CLOCK/DAY/SCHEDULE option

is not displayed, press DONE or

RUN SCHEDULE.

Note: If the display flashes Set Clock,

the Comfort Control will follow your settings

for the weekday “Wake” time period until

you reset the time and day.

Press SET CLOCK/DAY/SCHEDULE, then adjust time

Press SET DAY, then select current day

Heat

HeatOn

Select the fan setting

Press the FAN button to select Auto or On.

In “Auto” mode (the most commonly used

setting), the fan runs only when the

heating or cooling system is on. If set to

“On,” the fan runs continuously. Use this

setting for improved air circulation, or for

more efficient air cleaning.

Select the system setting

Note: The Auto and Em Heat

system settings may not appear,

depending on how your

Comfort Control was installed.

Press the SYSTEM button to select:

•Heat: Controls only the heating system.

•Cool: Controls only the cooling system.

•Off: Heating and cooling systems are off.

•Auto: Automatically selects heating

or cooling depending on the indoor

temperature.

•Em Heat (only for heat pumps with

auxiliary heat): Controls Emergency Heat.

Compressor is locked out.

Heat

Cool

Andere Handbücher für TCONT600AF11MA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Trane Thermostat Handbücher

Trane

Trane X13511537-01 Bedienungsanleitung

Trane

Trane XR203 Bedienungsanleitung

Trane

Trane TAYSTAT 340 Bedienungsanleitung

Trane

Trane TAYSTAT 370 Bedienungsanleitung

Trane

Trane TR-BAC-1000-DX2 Bedienungsanleitung

Trane

Trane XT500C Montageanleitung

Trane

Trane BAYSENS924 Betriebsanleitung

Trane

Trane DELUXE programable XT302C Bedienungsanleitung

Trane

Trane TCONT402AN32DA Montageanleitung

Trane

Trane Comfort Control XB200 Bedienungsanleitung

Trane

Trane taystat TAYSTAT 570 Bedienungsanleitung

Trane

Trane Schlage LiNK TZEMT400BB32MAA Montageanleitung

Trane

Trane XT302C Montageanleitung

Trane

Trane Thermostats Betriebshandbuch

Trane

Trane TZON1050AC52ZAA Bedienungsanleitung

Trane

Trane TAYSTAT 370 Bedienungsanleitung

Trane

Trane TZONE940AC52Z Fehlerbehebungshandbuch

Trane

Trane THS04 Bedienungsanleitung

Trane

Trane XR401 Comfort Control Bedienungsanleitung

Trane

Trane XT500C Bedienungsanleitung

Trane

Trane TCONT 800 Series Bedienungsanleitung

Trane

Trane 3518-7064 Bedienungsanleitung

Trane

Trane X13511542010 Bedienungsanleitung

Trane

Trane 3518-7065 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung