Trane Z WAVE TZEMT400AB32MAA Bedienungsanleitung

Thermostat

Model TZEMT400AB32MAA

User Guide

Contents

Product Speciﬁcations............................................2

Operation..................................................................3

Thermostat Control Screen Function Control Buttons 4

Minimized Display Mode ............................................. 5

Menu Map .................................................................6

User Settings ...........................................................7

Set Clock..................................................................... 7

Filter Service ............................................................... 8

Maint Service .............................................................. 9

Screen Timeout......................................................... 10

F/C Settings .............................................................. 11

Sensor Calibration..................................................... 12

Backlite/Display......................................................... 13

Usage Graph ..........................................................14

ESM Setpoints .......................................................15

ZWave Install..........................................................16

Inclusion.................................................................... 16

Exclusion................................................................... 16

Inclusion and Exclusion ............................................ 16

Thermostat Info .....................................................17

Installer Settings....................................................18

System Settings ........................................................ 19

Mechanical Settings.................................................. 20

Fan Cycler Settings................................................... 20

Schedules...............................................................21

Installation..............................................................24

LED Reference .......................................................25

Warranty .................................................................26

Index .......................................................................27

2Thermostat User Guide

Product Speciﬁcations

Specication Description

Product Model: TZEMT400AB32MAA

Product: Thermostat for Heating and Cooling HVAC System control.

Z-Wave™ RF communications enabled

Thermostat

Size: 5.7” wide x 4.0” height x 1.2” depth

Display: Graphical LCD, 2.75” x 1.5”, 64x128-pixel

Backlight: Yes, Blue/white, Controllable, on, off, timeout

Contrast: Adjustable on screen

Buttons: 6

LEDs: 4 (3 green, 1 red)

Power: 24VAC from HVAC System

HVAC System Type

Compatible:

Standard (gas/electric) or Heat Pump

Multistage System Compatible: Standard HVAC Systems: 2 stage heating, 2-stage cooling

Heat Pump Systems: 3 stage heating (2-compressor, 1 aux heat), 2-stage cooling

Heat Pump change over valve: Selectable change over with cool or with heat

Communications: Z-Wave™ RF

3Thermostat User Guide

Operation

The model TZEMT400AB32MAA thermostat provides typical thermostat control of a central heating and cooling HVAC

system. This thermostat also features a Z-Wave™ module for remote control.

72 77 H

11:15 AM

Sys Off

Run

Filter

Status Indicator

LEDs

Setpoint

Up/Down Buttons

Setpoint Display

Function Control Buttons

Dynamic Labels

AUTO

MODE AUTO

FAN RUN

74 C

Clock Display

Tempurature

Display

Normally, the thermostat displays the thermostat control screen as shown above.

Item Description Notes

Clock Display The current time is displayed in the upper

left corner of the main screen. The time will

blink when the clock has not been set.

See Set Clock on page 7 for more

information.

Status Indicator LEDs The thermostat has four LEDs that display

status information. The LEDs have dynamic

labels.

See LED Reference on page 25 for more

information.

Dynamic Labels and

Function Control Buttons

The buttons are dened by the dynamic

labels above each button. As you navigate

through menus, the labels for the buttons

will change.

Setpoint Display and

Setpoint Up/Down

Buttons

The current heat and cool setpoints are

displayed. These setpoints may be set

using the Z-Wave control system, the

thermostat’s internal schedule, or by

pressing the Setpoint Up/Down buttons. In

HEAT mode, the Setpoint Up/Down buttons

change the heat setpoint. In COOL mode,

they change the cooling setpoint. In AUTO

mode, the buttons change the last call’s

heating or cooling setpoint.

The setpoints will push each other if they

are adjusted to within the minimum heat/

cool separation setting. This is normally 3

degrees.

The internal schedule is disabled by

default. See Schedules on page 21 for more

information.

Temperature Display The thermostat displays the current

temperature as sensed by the internal

temperature sensor.

The internal temperature sensor can

be adjusted as necessary. See Sensor

Calibration on page 12 for more information.

4Thermostat User Guide

Thermostat Control Screen Function Control ButtonsOperation

Thermostat Control Screen Function Control Buttons

72 77 H

11:15 AM

Sys Off

Run

Filter

System

Mode Button

AUTO

MODE AUTO

FAN RUN

74 C

Fan Mode

Button

Schedule

Mode Button

Menu Button

Button Description

Menu Other thermostat menus can be accessed by pressing the MENU button.

System Mode Used to change the system mode:

Off: System off

Heating: Heating only on

Cooling: Cooling only on

Auto: Heating/Cooling on as necessary

Fan Mode Used to change the fan mode:

Auto: Fan on when cooling/heating is necessary

On: Fan constantly on

Schedule Mode Used to change the schedule mode:

Hold: System maintains the current temperature setpoints. Schedules are disregarded.

Run: Run the system schedule (or Z-Wave controlled schedule)

Energy Saving Mode: Temperature setpoints in ESM Setpoints are maintained. See ESM

Setpoints on page 15 for more information.

5Thermostat User Guide

Minimized Display ModeOperation

Minimized Display Mode

Optionally, you can set the thermostat to show only the temperature in minimized display mode. This mode can be enabled

or disabled in the Users Settings screen.

ÎSee Screen Timeout on page 10 for more information.

6Thermostat User Guide

Menu Map

The menus are accessed by pressing the MENU button on the main screen.

“User Settings”

Set Clock

Filter Service

Maint Service

Screen Timeout

F/C Settings

Sensor Calibration

Backlite/Display

“Usage Graph”

“ESM Setpoints”

“ZWave Install”

“Thermostat Info”

“Installer Settings” (hidden)

Display Lock

System Settings

Mechanical Settings

Type

Fan Type

C/O Type

2nd Stage Heat

Aux Heat

2nd Stage Cool

Sched Enable

Recovery Enable

H/C Delta

H Delta Stg1 ON

H Delta Stg1 OFF

H Delta Stg2 ON

H Delta Stg2 OFF

H Delta Stg3 ON

H Delta Stg3 OFF

C Delta Stg1 ON

C Delta Stg1 OFF

C Delta Stg2 ON

C Delta Stg2 OFF

Max Heat SP

Min Cool SP

Min Run Time

Min Off Time

Fan Cycler

Fan ON Time

Fan OFF Time

Restore Defaults

“Schedules” (disabled by default)

Heat and Cool

Preset:Comfort

Preset:EnergyStar

Copy (small c on each schedule screen)

7Thermostat User Guide

User Settings

Set Clock

The Set Clock screen allows you to set the thermostat’s internal clock.

ÎIf the clock has been reset by an extended power outage, the clock display on the thermostat screen will blink.

Press the MENU button to go directly to the Set Clock screen.

Set Clock

Back Set

Time 11 : 15 AM

Date 01 / 01 / 09

Day Thu

Set the Clock

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Set Clock and press the Select button.

4. Scroll to the item you want to change (hour, minute, day part, month, day, year, day of week).

5. Press the plus (+) or minus (-) buttons to adjust the item.

6. Press the Set button to save the changes.

8Thermostat User Guide

Filter ServiceUser Settings

Filter Service

The Filter Service screen will show the accumulated Filter Runtime hours as well as the Service Interval that will be used

to trigger a Filter Message. Any type of HVAC operation that causes the HVAC system fan to run will cause the Filter

Runtime value to increase.

When the Runtime hours equals the Service Interval hours, the Red LED will ﬂash along with a “Filter” message to remind

you to replace the ﬁlter. Once the ﬁlter has been replaced, press the Reset button to reset the Filter Runtime value to zero.

Filter Service

Done Reset

Filter Runtime 184 HRS

Service Interval 300 HRS

+ -

View/Reset Filter Runtime

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Filter Service and press the Select button. The Filter Runtime is displayed in hours.

4. To reset the Filter Runtime counter, press the Reset button.

ÎThe Filter Runtime counter should be reset each time the ﬁlter is changed.

Change the Filter Service Interval

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Filter Service and press the Select button.

4. Press the plus (+) or minus (-) buttons to adjust the service interval.

ÎThe service interval can be set between 100 and 4000 hours in 100 hour increments.

Disable the Filter Service Interval

When the ﬁlter service interval is disabled, the runtime counter will continue to count the runtime, but the ﬁlter service

indicator will never be displayed.

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Filter Service and press the Select button.

4. Press the minus (-) button until Disabled is displayed

9Thermostat User Guide

Maint ServiceUser Settings

Maint Service

The Maintenance Service screen shows the accumulated Heat and Cool Runtime hours as well as the Service Interval

that will be used to trigger a Maintenance Message. Any HEAT or COOL type of HVAC operation will cause the respective

Runtime values to increase.

When the combined HEAT and COOL Runtime hours equals the Service Interval hours, the Red LED will ﬂash along with

a “Maint” message to remind you your HVAC system may require periodic maintenance. Press the Menu button to enter

the Filter Service screen. The Reset button can be pressed and the HEAT and COOL Runtime values will be reset to zero.

Maintenance Service

Done Reset

Heat Runtime 200 HRS

Cool Runtime 300 HRS

Service Interval 3000 HRS

+ -

Change the Maintenance Service Interval

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Maint Service and press the Select button.

4. Press the plus (+) or minus (-) buttons to adjust the service interval.

ÎThe service interval can be set between 200 and 4000 hours in 100 hour increments.

Disable the Maintenance Service Interval

When the maintenance service interval is disabled, the runtime counter will continue to count the runtime, but the

maintenance service indicator will never be displayed.

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Maint Service and press the Select button.

4. Press the minus (-) button until Disabled is displayed

10Thermostat User Guide

Screen TimeoutUser Settings

Screen Timeout

This is the time before any screen reverts to the Minimized Screen (temperature display only), after you stop pushing

buttons. Minimized Screen feature is disabled by setting this time to “0”.

User Settings

Set Clock

Filter Service

Maint Service

Screen Timeout 0

Done Select

Change the Screen Timeout

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Screen Timeout

4. Press the plus (+) or minus (-) buttons to adjust the time (in seconds).

ÎThe screen time-out can be set between 0 and 120 seconds. Zero (0) is the default setting. When set to

Zero (0), the minimized screen feature is disabled.

Disable the Minimized Display

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Screen Timeout

4. Press the minus (-) button until zero (0) is displayed.

Andere Handbücher für Z WAVE TZEMT400AB32MAA

Inhaltsverzeichnis

Andere Trane Thermostat Handbücher

Trane

Trane TZEMT400BB32MMA Bedienungsanleitung

Trane

Trane XR103 Bedienungsanleitung

Trane

Trane Thermostats Betriebsanleitung

Trane

Trane ProSpace THT03191 Bedienungsanleitung

Trane

Trane taystat TAYSTAT 570 Bedienungsanleitung

Trane

Trane XR203 Bedienungsanleitung

Trane

Trane ComfortLink II XL1050 Bedienungsanleitung

Trane

Trane TCONT200AN11AA Montageanleitung

Trane

Trane TCONT600AF11MA Bedienungsanleitung

Trane

Trane Pivot Smart Bedienungsanleitung

Trane

Trane ZSASSMAL012 Montageanleitung

Trane

Trane Z WAVE TZEMT400AB32MAA Bedienungsanleitung

Trane

Trane TZEMT500AB32MAA Bedienungsanleitung

Trane

Trane TAYSTAT 575 Bedienungsanleitung

Trane

Trane THS-02 Bedienungsanleitung

Trane

Trane X13511542010 Bedienungsanleitung

Trane

Trane XL950 Bedienungsanleitung

Trane

Trane XR401 Comfort Control Bedienungsanleitung

Trane

Trane Schlage LiNK TZEMT400BB32MAA Montageanleitung

Trane

Trane TCONT800 Series Bedienungsanleitung

Trane

Trane TZONE950AC52ZA Bedienungsanleitung

Trane

Trane Z WAVE TZEMT400AB32MAA Bedienungsanleitung

Trane

Trane TCONT600AF11MA Bedienungsanleitung

Trane

Trane BAYSENS019C Montageanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung