Transition Networks SM4T4DPA Bedienungsanleitung
SM4T4DPA
4-port 10/100/1000Base-T,
4-port 100/1000 SFP
Managed Switch
Installation and Getting Started Guide
Rev.A1
25-July-12
i
ABOUT THIS GUIDE
PURPOSE This guide gives specific information on how to operate
and use the management functions of the switch.
AUDIENCE The guide is intended for use by network administrators who
are responsible for operating and maintaining network
equipment; consequently, it assumes a basic working
knowledge of general switch functions, the Internet Protocol
(IP), and Simple Network Management Protocol (SNMP).
CONVENTIONS The following conventions are used throughout this guide to
show information:
WARRANTY See the Customer Support/ Warranty booklet included with
the product.
A copy of the specific warranty terms applicable to your
Manufacture products and replacement parts can be
obtained from your Manufacture Sales and Service Office pr
authorized dealer.
NOTE: Emphasizes important information or calls your
attention to related features or instructions.
W
ARNING
:
Alerts you to a potential hazard that could cause
personal injury.
C
AUTION
:
Alerts you to a potential hazard that could cause loss
of data, or damage the system or equipment.
RELATED
PUBLICATIONS
The following publication gives specific information on how to
operate and use the management functions of the switch:
The User’s Manual
Rev.A1
25-July-12
ii
REVISION HISTORY
Date Revision
25/July/2012 A1
Rev.A1
25-July-12
iii
Contents
ABOUT THIS GUIDE ............................................................................................................................... i
INTRODUCTION ..................................................................................................................................... 1
OVERVIEW ......................................................................................................................................... 1
DESCRIPTION OF HARDWARE ........................................................................................................... 4
NETWORK PLANNING .......................................................................................................................... 6
INTRODUCTION TO SWITCHING..................................................................................................... 6
APPLICATION EXAMPLES ............................................................................................................... 6
INSTALLING THE SWITCH.................................................................................................................... 9
SELECTING A SITE ........................................................................................................................... 9
ETHERNET CABLING ....................................................................................................................... 9
EQUIPMENT CHECKLIST ............................................................................................................... 10
PACKAGE CONTENTS ................................................................................................................... 10
MOUNTING....................................................................................................................................... 10
INSTALLING AN OPTIONAL SFP TRANSCEIVER........................................................................ 12
CONNECTING TO A POWER SOURCE ......................................................................................... 13
CONNECTING TO THE CONSOLE PORT...................................................................................... 14
Operation of Web-based Management.............................................................................................. 16
MAKING NETWORK CONNECTIONS................................................................................................. 18
CONNECTING NETWORK DEVICES ............................................................................................. 18
TWISTED-PAIR DEVICES ............................................................................................................... 18
CABLE LABELING AND CONNECTION RECORDS ......................................................................... 24
A TROUBLESHOOTING ......................................................................................................................... i
Basic Troubleshooting Tips ............................................................................................................... 25
POWER AND COOLING PROBLEMS ................................................................................................. 28
Installation............................................................................................................................................ 28
IN-BAND ACCESS ........................................................................................................................... 28
CABLES................................................................................................................................................ 29
Rev.A1
25-July-12
iv
TWISTED-PAIR CABLE AND PIN ASSIGNMENTS ....................................................................... 29
STRAIGHT- THROUGH WIRING ......................................................................................................... 30
1000BASE-T PIN ASSIGNMENTS .................................................................................................. 33
CABLE TESTING FOR EXISTING CATEGORY 5 CABLE............................................................. 34
FIBER STANDARDS ............................................................................................................................ 34
C SPECIFICATIONS ............................................................................................................................. 36
COMPLIANCES .................................................................................................................................... 39
Rev.A1
25-July-12
1
INTRODUCTION
OVERVIEW The SM4T4DPA Switch is a managed Ethernet switches which
includes with 4 10/100/1000Base-T ports plus 4 dual
speed 100/1000 SFP slots, it provides ideal flexibility to design
suitable network infrastructure for business requirement.
Rev.A1
25-July-12
2
Front of the Switches
Figure 1:
Figure 2:
Back of the Switches
Power LED
Console Switch TP Port LEDs 100/1000 SFP
10/100/1000Base-T RJ-45 Ports
SM4T4DPA
AC Power Socket
Rev.A1
25-July-12
3
SWITCH
ARCHITECTURE
The switch performs a wire-speed, non-blocking switching fabric.
This allows wire-speed transport of multiple packets at low
latency on all ports simultaneously. The switch also features
full-duplex capability on all ports, which effectively doubles the
bandwidth of each connection.
This switch uses store-and-forward technology to ensure
maximum data integrity. With this technology, the entire packet
must be received into a buffer and checked for validity before
being forwarded. This prevents errors from being
propagated throughout the network.
NETWORK
MANAGEMENT
OPTIONS
The switch can also be managed over the network with a
web browser or Telnet application. The switch includes a built-in
network management agent that allows it to be
managed in-band using SNMP or RMON (Groups 1, 2, 3, 9)
protocols. It also has an RJ45 console port connector on the
front panel for out-of-band management. A PC may
be connected to this port for configuration and monitoring
out-of-band via a null-modem serial cable. (See Appendix B for
wiring options.)
NOTE: For a detailed description of the management features,
refer to the User’s manual.
Rev.A1
25-July-12
4
DESCRIPTION OF
HARDWARE
1000BASE-T
PORTS
The switch contains 4 10/100/1000BASE-T RJ-45 ports. All
RJ-45 ports support automatic MDI/MDI-X operation,
auto-negotiation and IEEE 802.3x auto-negotiation of
flow control, so the optimum data rate and transmission can be
selected automatically.
SFP TRANSCEIVER SLOTS
SM4T4DPA supports the Small Form Factor Pluggable (SFP) transceiver.
Please visit our web page for the detail of the optional SFP modules:
http://www.transition.com/TransitionNetworks/Landing/SFP-XFP/SFP-XFP.aspx
Rev.A1
25-July-12
5
PORT AND SYSTEM
STATUS LEDS
The SM4T4DPA switch includes a display panel for system
and port indications that simplify installation and network
troubleshooting. The LEDs, which are located on left hand side
of the front panel for easy viewing. Details are shown below
and described in the following tables.
Table 1: Port Status LEDs
LED Condition Status
TP (Link/ACT) Green Lit Green when TP link good
Blinks when any traffic is present
TP SPEED Green
Lit Green when TP link on 1000Mbps
Blinks when TP link on 100Mbps
Off when TP link on 10Mbps
SFP (Link/ACT) Green/Amber
Lit Green when SFP link on 1000Mbps speed
Lit Amber when SFP link on 100Mbps speed
Blinks when any traffic is present
Table 2: System Status LED
SYSTEM LED Condition Status
Power Green
OFF Lit when power is coming up
POWER SUPPLY
SOCKET
There are a power sockets on the rear panel of the switch. For
normal power supply, the Switch has standard power socket for
AC power cord.
Figure 3: Power Supply Socket
AC Power socket
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Transition Networks Schalten Handbücher
Transition Networks
Transition Networks SM12DP2XA Bedienungsanleitung
Transition Networks
Transition Networks HB-E-TX-8 Bedienungsanleitung
Transition Networks
Transition Networks E-FX-HB-0800 Bedienungsanleitung
Transition Networks
Transition Networks SM Series Bedienungsanleitung
Transition Networks
Transition Networks SM24T6DPA Bedienungsanleitung
Transition Networks
Transition Networks SM16TAT2SA Bedienungsanleitung
Transition Networks
Transition Networks SISPM1040-3 L Series Bedienungsanleitung
Transition Networks
Transition Networks SM24TBT2DPA Bedienungsanleitung
Transition Networks
Transition Networks mil-sm8dpa Handbuch
Transition Networks
Transition Networks LANMaster T8-FL Bedienungsanleitung
Transition Networks
Transition Networks SISPM1040-3166-L Bedienungsanleitung
Transition Networks
Transition Networks SISPM1040-582-LRT Bedienungsanleitung
Transition Networks
Transition Networks SISTG1040-242-LRT Bedienungsanleitung
Transition Networks
Transition Networks StackMaster SMHB-E-FL-12 Bedienungsanleitung
Transition Networks
Transition Networks SM8TAT2SA-DC Bedienungsanleitung
Transition Networks
Transition Networks SM24TBT2DPA Bedienungsanleitung
Transition Networks
Transition Networks SESPM1040-541-LT Series Bedienungsanleitung
Transition Networks
Transition Networks SISPM1040-582-LRT Bedienungsanleitung
Transition Networks
Transition Networks MIL-S4800 Bedienungsanleitung
Transition Networks
Transition Networks SISTG1040-242-LRT Bedienungsanleitung
Transition Networks
Transition Networks SISTP1040-382B-LRT Bedienungsanleitung
Transition Networks
Transition Networks SISTM1040-262D-LRT Bedienungsanleitung
Transition Networks
Transition Networks LAN MASTER 33022.B Bedienungsanleitung
Transition Networks
Transition Networks SISGM1040-284-LRT Bedienungsanleitung
