Transtector ALPU-EXLT Bedienungsanleitung

Thank you for your recent purchase of our surge protection solution.

Your satisfaction with our product and service is important to us.

If you have any questions, comments or concerns, please contact us

at 800.882.9110 or visit our website at www.ProtectionGroup.com.

We look forward to continuing to serve your protection needs.

800.882.9110 | 208.772.8515 | www.ProtectionGroup.com

1. IMPORTANT SAFETY AND INSTRUCTIONS

2. Read and understand all instructions before installing this product.

Save these instructions for future reference.

3. This suppressor is intended to provide lightning protection for vari-

ous congurations of Exalt r-series radios.

ALPU-EXLT

Installation Instructions

800.882.9110 | 208.772.8515 | www.ProtectionGroup.com

1. This product is intended for use only on data and DC power circuits with

operating voltages not to exceed 55VDC and operating currents not to exceed

1A.

2. Mounting the ALPU-EXLT (See Diagram): Mount the device as close to the

equipment to be protected as possible using the provided hardware and the

concealed mounting holes. Mount the unit in the orientation shown, with the

marking “UP” facing upward and the strain reliefs facing the ground.

3. Wiring the ALPU-EXLT

3.1 Removing the Cover: Loosen the 4 captive cover screws using a Phil

lips screwdriver and lift off the cover.

3.2 Wiring the Suppressor: Thread a multiconductor cable from the data

source through the strain relief adjacent to the marking on the PCB la

beled Input. Strip back the cable jacket as needed, then install the conduc

tors into the IDC connectors labeled Input using the following technique:

Lay the wires into the grooves in the connector, leaving approximately

1/8” of wire overhanging, and press down rmly with the punch-down tool

provided in the packaging supplies until the wires rmly engage into the

fork terminals. Use the wiring tables in this document as well as the call

outs on the PCB as a guide. Repeat this procedure for the outgoing `

multiconductor cable, using the connectors labeled Output. Tighten the

strain reliefs to secure the cables (DO NOT OVER TORQUE!!). Reinstall

the cover.

3.3 The ALPU-EXLT is compatible with Exalt r-series radios, as well as any

other radio systems with the electrical service characteristics given in note

3.4 Grounding: Connect the external ground lug on the enclosure to a solid

Earth ground. The unit must be grounded for the suppressor to operate

properly!

ALPU-EXLT

1200-333 REV B

Inhaltsverzeichnis

Andere Transtector Überspannungsschutz Handbücher

Transtector

Transtector APEX Series Bedienungsanleitung

Transtector

Transtector CPX Series Bedienungsanleitung

Transtector

Transtector ALPU Fit Bedienungsanleitung

Transtector

Transtector ALPU HT Bedienungsanleitung

Transtector

Transtector ALPU-ALVR Bedienungsanleitung

Transtector

Transtector I2R SPV1000 3-40 Bedienungsanleitung

Transtector

Transtector CPX Bedienungsanleitung

Transtector

Transtector ALPU Lite Bedienungsanleitung

Transtector

Transtector ALPU Series Bedienungsanleitung

Transtector

Transtector I2R 75K Series Bedienungsanleitung

Transtector

Transtector TSJ X6 Series Bedienungsanleitung

Transtector

Transtector CB Series Bedienungsanleitung

Beliebte Überspannungsschutz Handbücher anderer Marken

ELAC

ELAC ProteK PR91-W Bedienungsanleitung

Tsubaki

Tsubaki TSM4000M1 Bedienungsanleitung

QVS

QVS PP134C Bedienungsanleitung

CyberPower

CyberPower CSP604T Bedienungsanleitung

Davis Instruments

Davis Instruments Radio Surge Protector Bedienungsanleitung

M-system

M-system MGA-100 Bedienungsanleitung

CyberPower

CyberPower CSP706T Bedienungsanleitung

CyberPower

CyberPower B300WRC1 Bedienungsanleitung

M-system

M-system MGD-24 Bedienungsanleitung

Leviton

Leviton 51120-3R Bedienungsanleitung

Panamax

Panamax MAX 5400-EX Bedienungsanleitung

CyberPower

CyberPower B1006T Bedienungsanleitung

OBO Bettermann

OBO Bettermann ÜSM-20-230I1PE65 Bedienungsanleitung

Minuteman

Minuteman MMS7120RCT Bedienungsanleitung

Leviton

Leviton 52412-DS3 Bedienungsanleitung

Savio

Savio LZ-07 Bedienungsanleitung

Siemens

Siemens HNM3M120 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric LITOL LTM-125RF Bedienungsanleitung