Transystem G-Log 760 Bedienungsanleitung

G-Log 760 GPS Recorder

V1.1

User’s Manual

Published 10-June-2011

*Specifications subject to change without prior notice.

G-Log 760 GPS Recorder

V1.1

Table of Contents

1. Before you begin ........................................................................................................................ 3

1-1. Note and Warning ............................................................................................................... 3

1-2. Introduction......................................................................................................................... 4

1-3. Features ............................................................................................................................... 4

1-4. Applications ........................................................................................................................ 4

1-5. Package content .................................................................................................................. 5

2. Getting Started............................................................................................................................ 6

2-1. Appearance.......................................................................................................................... 6

2-2. Buttons ................................................................................................................................ 7

2-3. LED Display ....................................................................................................................... 7

2-4. Default setting..................................................................................................................... 8

2-5. POI confirmation ................................................................................................................ 9

2-6 Smart Log............................................................................................................................. 9

2-7 AGPS.................................................................................................................................... 9

2-8. Getting Started .................................................................................................................. 10

2-9. Helpful Tips .......................................................................................................................11

3. Configure your GPS Recorder ................................................................................................. 12

3-1. Driver Installation ............................................................................................................. 12

3-2. GpsView software............................................................................................................. 12

3-2-1. Connect USB cable between GPS and laptop ....................................................... 12

3-2-2. Execute GpsView Program ................................................................................... 13

3-2-3. Download AGPS ................................................................................................... 14

Appendix A. Specifications.............................................................................................................. 25

Appendix B. Certification ................................................................................................................ 27

Appendix C. Warranty Information.................................................................................................. 28

G-Log 760 GPS Recorder

V1.1

1. Before you begin

1-1. Note and Warning

If G-Log 760 is used in temperature lower than -10°C or higher than 60°C, its Lithium-Ion

battery charging capability will decrease. Please leave your G-Log 760 far from heat or

high temperature environment. In addition, do not expose your G-Log 760 in temperature

higher than 140°F(60°C). The battery inside G-Log 760 may be overheated and cause very

serious damage. The Lithium-Ion battery inside the G-Log 760 should be recycled.

It is recommended to turn off G-Log 760 while in the hospital. Wireless GPS may interfere

with medical equipments which use radio frequency.

Store your G-Log 760 in dry/cool places if you are not using G-Log 760 for a long period

of time.

Keep G-Log 760 and all accessories out of children’s reach.

The manufacturer assumes no responsibility for any damages and loss resulting from the

use of this manual, or from deletion of data as a result of malfunction, dead battery, or from

misuse of the product in any way.

Use only the supplied and approved accessories. Unauthorized accessories, modifications

or attachments could damage your G-Log 760, and may violate regulations governing radio

devices.

Use a dry, clean soft cloth to clean the unit. Do not use harsh cleaning solvents, chemicals,

or strong detergents.

Do not attempt to open the G-Log 760 by yourself. Unauthorized hacking may damage the

unit, and void your warranty.

G-Log 760 GPS Recorder

V1.1

1-2. Introduction

GPS G-Log 760 features commercial grade GPS receiver to help manage your field team effectively.

Its water-proof, durable all-in-one design includes audible feedback and motion sensor to give

maximum battery life.

GPS G-Log 760 allows you to log your route by setting the interval of time/ distance/ speed. Easy to

use and durable button allow field personal to record point of interest by push of a button. Through

user friendly utility, it can display your track on Google Map.

1-3. Features

Durable push button for POI recording

Smart log of time, distance and speed

Log up to 250,000 waypoints

High receiving sensitivity with AGPS capability

IPX3 water-proof

Embedded sensor for smart operation

Smart auto on/off

Vibrator / Buzzer (Factory optional) for POI confirmation

Rechargeable battery

1-4. Applications

Record your travels

Manage trip expense

Manage field team

G-Log 760 GPS Recorder

V1.1

Point of interest recording

1-5. Package content

Congratulations on your purchase of GPS G-Log 760 with Lithium-Ion chargeable battery. Before

you start using G-Log 760, please make sure your package includes following items. If any item is

damaged or missing, please contact your local dealer at once.

1. G-Log 760 GPS Recorder ( include Li-Ion battery ) x 1

2. USB cable x 1

3. CD Tool x 1 (user manual, software utility, driver)

4. Quick start guide x 1

* Unit package contents may vary depending on countries without prior notice.

G-Log 760 GPS Recorder

V1.1

2. Getting Started

2-1. Appearance

1. Power bottom

2. Push to log (POI) button

3. Smart mode Led (Blue)

4. Memory capacity LED (Red)

5. GPS status LED (Orange)

6. Car mode LED (Blue)

7. Battery status LED (Red/Green)

8. Built-in patch Antenna

9. USB connector & Reset button (with cover)

5 6

G-Log 760 GPS Recorder

V1.1

2-2. Buttons

Name Description

Power Press and hold 3 seconds to turn On and Off your device.

Press to check the battery status when device is power on.

POI Push button to record Point of Interest (POI),

Memory status LED will blink 3 times to confirm button pressed

Mode change Press POI button for 5 seconds to switch between normal and smart mode.

Press POI button for 10 seconds to switch between normal and car mode.

* Vibrating feedback is provided when POI button is pressed.*

Reset Button Push to have device back to normal mode.

Press for 5 seconds to have factory default setting and logged data erased.

Please do not turn off the device when memory red color LED is flashing.

2-3. LED Display

The G-Log 760 GPS Recorder has following LED displays for status update.

Symbol Function /

Color Status Description

Battery Status /

Red

Blinking

Low

battery

level

On During power charging via USB port

Battery Status /

Green On / Off Power gauge when both POI and Power

buttons are pressed at the same time

Battery Status /

Green & Red All LED On Fully charged

GPS Status /

Orange

On Searching for satellite

Blinking GPS fix & start log

Car mode status /

Blue On

In car mode, device will go into sleep

mode when no power supply from USB

and device will wake up and start logging

when there is power supply from USB.

G-Log 760 GPS Recorder

V1.1

Memory capacity /

Red

Blinking The device is logging position

Blink 3 times

POI button is pressed

On The memory is >80% full

Keep flashing

Erasing data

Smart Log mode /

Blue

On Smart log mode on/ vibration sensor on

Off Normal mode on/ vibration sensor off

2 sec flashing

Sleep mode

1/3 sec

flashing Reset button pressed to rest the device

2-4. Default setting

NMEA

GGA,GSA,GSV,RMC

Log format

Date / Time/ Fix valid / Latitude / Longitude / Height/ Speed / Heading / RCR

Normal mode

User Name : Empty

Auto Gear : OFF (can be turned on/off by software)

Log by time : 1 (can be programmed by software)

Log by distance : 0 (can be programmed by software)

Log by Speed : 0 (can be programmed by software)

Vibration sensor : OFF (can be turned on/off by software)

Check password : OFF (can be turned on/off by software)

Smart Mode

User Name : Empty

Auto Gear : ON (can not be turned off by software)

Vibration sensor : ON (can not be turned off by software)

Check password : OFF (can be turned on/off by software)

Auto gear log time interval default:

Speed < 5Km →30 seconds

5Km<speed< 50km →15 seconds

Speed > 50km n →5 seconds

Car mode

User Name : Empty

Auto Gear : OFF (can be turned on/off by software)

Log by time : 5 (can be programmed by software)

Log by distance : 0 (can be programmed by software)

Log by Speed : 0 (can be programmed by software)

Vibration sensor : OFF (can not be turned on by software)

Check password : OFF (can be turned on/off by software)

G-Log 760 GPS Recorder

V1.1

2-5. POI confirmation

G-Log 760 uses following methods to confirm press of POI button:

Vibrator (default)

Memory capacity LED blinks 3 times (default)

Sound buzzer alarm (Factory Optional)

2-6 Smart Log

G-Log 760 will go into sleep mode and stop logging position if the on-board vibration sensor

detects no movement for over 3 minutes. This will help save power and memory space you’re your

G-Log 760 stays still.

User can choose to turn On or Off vibration sensor via LogView application program.

Also the logging interval is auto adjusted by current speed:

Speed greater than high limit, log every 5 sec

Speed lower than high limit and higher than lower limit, log every 15 sec

Speed lower than low limit, log every 30 sec

High / Low limit can be set by PC application program (LogView). Default high limit is

50Km/hour and low limit is 5Km/hour.

2-7 AGPS

You can download GPS satellite information from internet to help shorten satellite acquisition time.

This is called Asist GPS. Please follow section 3.2.3 to download AGPS data. Please note, AGPS

G-Log 760 GPS Recorder

V1.1

data is valid for 7 days after each download.

2-8. Getting Started

Please follow the procedure step by step.

Step 1 Charging the battery

Connect your USB cable between G-Log 760 and the power source. Charging time is about 3~4

hours and you can charge from PC/ Notebook’s USB HOST or from cigarette-lighter in car or

home adapter.

For the 1st time you use the G-Log 760, please charge battery until it is full. Red Power LED will

be On during charging cycle and 2 Green LEDs and 1 Red LED will be all On once the charging is

completed.

Step 2 Turn on your G-Log 760 and get position fix

Turn on your GPS G-Log 760 by press-and-hold the power button for 3 seconds. Power LED will

turn on after power on sequence is completed. The orange GPS status LED will stays on before

G-Log 760 get GPS position fix. Make sure your GPS G-Log 760 has clear sky view at this stage

of acquiring satellite signal. Depending on your surroundings, it normally takes around 40 seconds

to 1.5 minutes before GPS status starts to blink which means G-Log 760 has acquired necessary

satellite signals and get position fix..

Step 3 Log your position

GPS G-Log 760 will start logging your position once it locks to satellites signal. It will log and

mark position upon press of POI button. A vibrator is used as means of confirmation. Optional

buzzer can also be used for confirmation purpose. This is only valid for specific setting when

ex-factory.

Step 4 Download logged data

Andere Handbücher für G-Log 760

Inhaltsverzeichnis

Andere Transystem GPS Handbücher

Transystem

Transystem TripMate850 Bedienungsanleitung

Transystem

Transystem iBT-GPS Bedienungsanleitung

Transystem

Transystem 860 PRO PersonalMate Bedienungsanleitung

Transystem

Transystem iGPS-M Pro Bedienungsanleitung

Transystem

Transystem G-Log 760 Bedienungsanleitung

Beliebte GPS Handbücher anderer Marken

Raven

Raven Cruizer II Handbuch

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung