Traub TNL12.2 Bedienungsanleitung

DTE070EN - 15.09.2021

09.21/Ru (Transport, Aufstellung, Inbetriebnahme) - 20187889

Transport,

Installation,

Commissioning

TNL12. 2

OPERATING INSTRUCTIONS

Transport and installation

Note on applicability

Illustrations in this publication may deviate from the product supplied. Errors and omissions due to technical

progress expected.

A word on copyright

This document is protected by copyright and was originally compiled in German.

The duplication and distribution of this document or parts thereof is prohibited without prior consent of

the copyright owner, and any violators will be prosecuted. All rights, including the right to translate, are

reserved.

©Copyright by INDEX-Werke GmbH & Co. KG

Englisch

Transport and installation

TNL12.2

DTE070EN - 15.09.2021

Table of Contents

SafetySafety .............................................................................................................................................................................................................................................................................................. 77

Explanation of symbols ..................................................................................................................... 7

Safety instructions documentation .................................................................................................... 7

Installation planInstallation plan ............................................................................................................................................................................................................................................................ 99

Installation plan TNL12.2, simpliﬁed .................................................................................................. 9

Installation items - load distribution TNL12.2 ..................................................................................... 10

GeneralGeneral .......................................................................................................................................................................................................................................................................................... 1111

Information for transporting the machine ......................................................................................... 11

Lifting device ................................................................................................................................. 11

Information on where the machine is installed ................................................................................. 12

Space requirements .......................................................................................................................... 12

Environmental conditions .................................................................................................................. 12

Subsoil, foundation ............................................................................................................................ 12

Floor trough ....................................................................................................................................... 13

Compressed-air supply ...................................................................................................................... 13

Operating material to be provided ..................................................................................................... 13

Pumps and tanks ............................................................................................................................... 13

Customer site attachment of a local extraction system .................................................................... 13

Power supply ..................................................................................................................................... 14

Main circuit breaker ........................................................................................................................... 14

External data transfer ........................................................................................................................ 14

Chip disposal ..................................................................................................................................... 15

Disposal of used operating materials ................................................................................................ 15

Observing the ground and wastewater regulations ........................................................................... 15

Transporting the machineTransporting the machine .......................................................................................................................................................................................................................... 1717

Delivery of the machine ..................................................................................................................... 17

Dimensions and weights ................................................................................................................... 18

Machine TNL12.2 .......................................................................................................................... 18

Cooling lubricant unit ..................................................................................................................... 18

Machine center of gravity (S) ............................................................................................................. 19

Transport by crane (min. 3 t capacity) ................................................................................................ 20

Attaching the lifting device components ....................................................................................... 21

Attaching the machine to the lifting device ................................................................................... 22

Transporting the machine ............................................................................................................. 23

Transporting with a forklift ................................................................................................................. 24

Technical requirements – forklift ................................................................................................... 24

Transporting with transport casters ................................................................................................... 27

Technical requirements – transport casters ................................................................................... 28

4Transport and installation

TNL12.2

DTE070EN - 15.09.2021

Table of Contents

Installing the machineInstalling the machine ........................................................................................................................................................................................................................................ 3333

Electrical connection ......................................................................................................................... 33

Aligning and doweling the machine ................................................................................................... 33

Spirit level and support surface ..................................................................................................... 33

Installation items ........................................................................................................................... 33

Aligning .......................................................................................................................................... 34

Fastening to the ﬂoor .................................................................................................................... 34

Removing the transport locks from the machine ............................................................................. 36

Locations of the transport locks on the machine .............................................................................. 36

Transport lock at main spindle ....................................................................................................... 37

Transport lock at counter spindle and back working attachment .................................................. 38

Upper tool carrier and front working attachment .......................................................................... 39

Transport lock at operating panel .................................................................................................. 39

Transport lock at work area door ................................................................................................... 40

Connecting the machine to central suction unit ................................................................................ 41

Shutoff valve for ﬁre protection .................................................................................................... 41

Indicator lamp ................................................................................................................................... 43

Installing conﬁguration levels and additional equipmentInstalling conﬁguration levels and additional equipment .................................................................................................................. 4545

Transporting and installing the cooling lubricant unit ......................................................................... 45

Installing the cooling lubricant unit ................................................................................................... 46

Sealing of cooling lubricant unit / machine .................................................................................... 47

Connecting the cooling lubricant unit ............................................................................................ 48

Electrical connectionElectrical connection ............................................................................................................................................................................................................................................ 4949

Important notes ................................................................................................................................. 49

Pneumatic connectionPneumatic connection ........................................................................................................................................................................................................................................ 5151

Provision of compressed air .............................................................................................................. 51

Air consumption ............................................................................................................................ 51

CommissioningCommissioning .............................................................................................................................................................................................................................................................. 5353

Cleaning the machine ........................................................................................................................ 53

Check the operating ﬂuid levels and replenishing, if necessary ........................................................ 54

Data loss due to prolonged downtime .............................................................................................. 54

Switching on the machine ................................................................................................................ 55

Transport and installation

TNL12.2

DTE070EN - 15.09.2021

Table of Contents

Relocation of the machineRelocation of the machine .......................................................................................................................................................................................................................... 5757

Preparing the machine for transport .................................................................................................. 57

Transport locks on the machine ........................................................................................................ 57

Locations of the axes for attaching the transport locks ................................................................ 57

Drain the hydraulic tank before transport .......................................................................................... 58

Seal disconnected hose lines or pipelines ......................................................................................... 58

Corrosion protection .......................................................................................................................... 58

Transporting the machine with a truck .............................................................................................. 59

Loading guard ................................................................................................................................... 60

6Transport and installation

TNL12.2

DTE070EN - 15.09.2021

Table of Contents

Transport

TNL12.2

DTE070EN - 15.09.2021

Safety

Explanation of symbols

This section explains the symbols that are used in the user documentation to

call attention to dangers and important notes.

This symbol warns against a direct, imminent danger to the life and

health of individuals. Failure to observe this danger warning may

result in severe health impairment such as perilous injury and even

death.

This symbol warns against a direct, imminent danger from electric-

ity. Failure to observe this danger warning may result in severe

health impairment such as perilous injury and even death.

This symbol indicates important notes for the proper operation of

the machine. Failure to observe this information may result in dam-

age to or malfunction of the machine or its components.

Safety instructions documentation

The user documentation and, in particular, the safety instructions

must be observed.

The safety instructions, as a separate document, are part of the

TRAUB user documentation.

8Transport

TNL12.2

DTE070EN - 15.09.2021

Safety

Transport, Installation, Commissioning

TNL12.2

DTE070EN - 15.09.2021

Installation plan

Installation plan TNL12.2, simpliﬁed

The corresponding installation and layout plan must be requested before the machine is installed.

Example shown

10011216412

10 Transport, Installation, Commissioning

TNL12.2

DTE070EN - 15.09.2021

Installation plan

Installation items - load distribution TNL12.2

Installation items A B C D

Max. static load (kN) 5.0 9.7 3.5 6.9

Andere Handbücher für TNL12.2

Inhaltsverzeichnis

Andere Traub Drehbank Handbücher

Traub

Traub TNX65 Bedienungsanleitung

Beliebte Drehbank Handbücher anderer Marken

Holzmann

Holzmann VD 1100ECO Bedienungsanleitung

Grizzly

Grizzly G0632 Kurzanleitung

Grizzly

Grizzly G0462 Bedienungsanleitung

Grizzly

Grizzly G0709 Bedienungsanleitung

Grizzly

Grizzly G0949G Bedienungsanleitung

Kval

Kval 990-H Bedienungsanleitung

Teknatool

Teknatool Nova Mercury Bedienungsanleitung

WoodFast

WoodFast M305 Bedienungsanleitung

Milltronics

Milltronics ML Series Handbuch

Milltronics

Milltronics SL6 Series Handbuch

OmniTurn

OmniTurn GT-75 Bedienungsanleitung

Axminster

Axminster CQ6230A-2/910 Bedienungsanleitung

Jet

Jet JWL-1640EVS Service-Handbuch

Grizzly

Grizzly G4000 Bedienungsanleitung

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN ED1000FB Bedienungsanleitung

Hercus

Hercus 260 Bedienungsanleitung

Optimum

Optimum OPTIturn TM 3310 Bedienungsanleitung

HARVEY

HARVEY T-60S Bedienungsanleitung