Treasure Garden AG25TSQ Montageanleitung

Assembly and Operation Guide

www.treasuregarden.com

v.05.18.21

AG25T CANTILEVER

AG25T 11.5’ octagon

AG25TSQ 10’ square

WARRANTY:

Treasure Garden warrants this product

(for residential use ONLY) to be free

from defects in original materials and

workmanship for a period of 1 year from

the date of purchase. If a defect in the

original material or workmanship appears

during the warranty period; Treasure

Garden will (at its discretion) repair or

replace the product without charge.

Simply contact your original authorized

Treasure Garden dealer with a description

of the defect. The dealer will verify the

defect and work closely with Treasure

Garden to obtain the necessary service.

In many cases, simple problems can

be solved with a replacement part that

can be shipped directly to the dealer for

professional installation / repair.

Tampering with or altering the product will

void warranty.

In the event that warranted factory service

is required, Treasure Garden will assume

the responsibility of the return freight

charges for the first year only.

Returned product that (upon receipt and

inspection) is deemed to be “not covered”

under our warranty, will be shipped / billed

at your expense.

This warranty gives you specific legal

rights, and you may have other rights

which vary from state to state.

RUST: Rust is a natural part of the aging

process of steel or iron based materials,

and is therefore NOT considered a defect.

NOTE: Failure caused by unreasonable or

abusive use, or failure caused by neglect

of reasonable and necessary care are not

covered by this warranty.

Additionally, acts of nature (including but

not limited to wind, hurricanes, tornadoes,

and storms) are not covered by this

warranty.

SAFETY PRECAUTIONS

• To reduce risk of personal injury in which a person is injured or harmed, and/or damage

to personal property, read and follow the Assembly Guide prior to assembling and

operating umbrella and base.

• Close and store the umbrella in windy conditions or when a storm approaches. Never

allow the umbrella to flap in the wind; this could cause personal injury, damage to

personal property, damage to umbrella and/or umbrella canopy. Do not use tilting

function during windy conditions.

• Keep umbrella secured to umbrella base at all times.

• Do not leave open umbrella unattended. If damage occurs, this is not covered by the

warranty.

• When adjusting the umbrella, make sure that no person(s), item(s) or personal property

are close to the umbrella. This is important to prevent injury or material damage.

• Do not allow children to play on or with umbrella or umbrella base.

• When adjusting or assembling the umbrella or umbrella base, make sure fingers, toes

or any other parts of the body are clear from moving parts. Failing to do so many result

in serious injury.

Thank you for purchasing Treasure Garden’s AG25T Cantilever.

Please remove all contents from the package, inspect and review checklist.

Some parts may be included in the styrofoam packaging.

Do not discard any packaging or box until assembly is complete.

CHECKLIST

A - (1) 360°Rotating Hub I - (1) Crank Handle

B - (1) Foot Pedal J - (1) Canopy Support Beam

C - (1) Hardware Assembly K - (1) Finial

D - (1) Main Frame L - (1) Canopy

E - (1) Adjustment Knob M - (7) Spring Loaded Rib End Cap

F - (1) Open/Close Mechanism N - (1) Valance (optional)

G - (1) Tilt Mechanism O - (1) Light Adapter (light sold separately)

H - (1) Tilt Degree Scale P - (1) Protective Cover

IMPORTANT:

Prior to assembly it is important to decide on the location of the umbrella.

·Allow ample height to avoid damage to your umbrella during assembly and usage.

·Choose a location that is level and sturdy.

·Avoid any sloping of soft ground.

·Consider a location that will maximize the umbrella’s 360°rotating function. Placing the

umbrella between two entertaining areas is ideal.

CAUTION:

·Fully assembled, the umbrella weighs over 300 lbs. Moving umbrella fully assembled

will increase the risk of damage to your umbrella and/or can cause serious injury. We

recommend a two-person team for assembly and disassembly.

Close Open

Right Left

Open

Max

0˚

Max

6mm Hexagon

Wrench

CARE AND MAINTENANCE

• When not in use, close and cover umbrella with provided protective cover.

• Allow a wet canopy to dry while in open position, but do not leave unattended.

• If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge.

• Wipe sliding marks on the aluminum poles with a damp cloth.

Winter Storage:

• Store in a dry place.

After the Winter:

• Check the condition and function of the umbrella. Any defects must be repaired by a

professional.

Cl Open

Right Left

Open

Max

0˚

Max

(Fig. 13)

(Fig. 14) (Fig. 15)

STEP 6CLOSING UMBRELLA

Position yourself behind umbrella. Insert crank handle into “Open/Close” socket in crank

mechanism (Fig. 13). Turn crank handle counter clockwise until the canopy is closed

(Fig. 14). Turn adjustment knob counter clockwise and slide downward until umbrella is in

closed position. Tie string around canopy to secure canopy. Cover umbrella with provided

protective cover when not in use (Fig. 15). NOTE: Prior to closing ensure that the canopy

is in a level (non-tilt) position. Properly store umbrella when not in use. Close umbrella, tie

string around canopy and cover umbrella with provided protective cover.

TO PROPERLY FOLD CANOPY:

The canopy will last longer if you fold it as it was packed and shipped. This technique is

similar to the way a parachute is folded and is especially important when folding the canopy

for seasonal storage or when left in the closed position for an extended period of time.

Using this technique at all times will significantly extend the life of the canopy.

• When the umbrella has been fully closed, stand in front of the canopy

structure and begin the folding process by pulling out two panels

opposite the main frame. Pull the two panels together and roll tight into

the canopy.

• Once rolled tight, pull adjacent panels out one at a time and fold to the

center, alternating sides until all the panels have been pulled out from

the arms and folded into the center.

• Tie string around canopy and cover umbrella with provided protective

cover.

STEP 1UMBRELLA ASSEMBLY

Two-persons recommended for team lift and to complete assembly.

With base cover in place or mount kit installed, lift umbrella up and insert the main frame

onto the installed rotating hub (Fig. 1). Secure umbrella into place by inserting the (2) bolts

and (2) washers and tighten using 6mm hexagon wrench provided (Fig. 2).

REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO

OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS.

Your umbrella is now ready for use!

NOTE: REFER TO SEPARATE BASE OR MOUNT KIT MANUAL

FOR BASE ASSEMBLY PRIOR TO PROCEEDING.

(Fig. 1) (Fig. 2)

Foot Pedal

Main Frame

Rotating Hub

360

(Fig. 10)

STEP 4ROTATING UMBRELLA

Place your foot on the foot pedal of the rotating hub and step-on the pedal to release

rotating lock (Fig. 10). Place hands on the main frame and rotate the umbrella frame

in either direction, in 90° increments. To lock position, step off the foot pedal to engage

rotating lock.

(Fig. 11) (Fig. 12)

STEP 5LIGHT ADAPTER FEATURE

To ATTACH Umbrella Light: (sold separately)

Loosen the light adapter built into the umbrella runner by turning counter-clockwise

(Fig. 11). After loosening, pull down light adapter post (Fig. 12) to attach the umbrella light

(sold separately).

To REMOVE Light and CLOSE adapter:

Hold the umbrella light, depress the clamp release button to release the clamp lock.

Remove umbrella light and gently push up the light adapter post back into umbrella runner

and tighten turning clockwise (Fig. 11).

NOTE: It may be necessary to lower umbrella to a reachable height to pull light adapter

down and attach umbrella light. It is not necessary to remove light to close umbrella.

IMPORTANT:

For free standing base applications, it is imperative to install the appropriate base for your

size cantilever. The minimum base weight recommended for the AG25T is 200 lbs.

(Fig. 3)

(Fig. 4)

STEP 2OPENING UMBRELLA

Position yourself behind umbrella. In the closed position, turn adjustment knob counter

clockwise (Fig. 3) and slide the adjustment knob upward (Fig. 4). Turn adjustment knob

clockwise to tighten and secure in place.

Right Left

Max

0˚

Max

Close Open

Cl Open

Right Left

Open

Max

0˚

Max

Insert crank handle into “Open/Close” socket in crank mechanism (Fig. 5). Turn crank

handle clockwise until the canopy is fully open (Fig. 6). CAUTION: Stop turning the crank

handle as soon as the umbrella canopy is completely open and the sleeve on the umbrella

center pole has reached its maximum height.

(Fig. 5)

(Fig. 6)

(Fig. 9)

(Fig. 8)

Right Left

Max

0˚

Max

Close Open

Open

(Fig. 7)

STEP 3TILTING UMBRELLA

To Tilt Canopy Vertically:

IMPORTANT: PRIOR TO USING VERTICAL AND HORIZONTAL TILT FEATURE.

To avoid personal injury or damage to the umbrella, make sure the area behind you is clear

and free from any furniture or structure.

Position yourself behind umbrella. Turn adjustment knob counter clockwise (Fig. 7) and

slide car up and downward until desired height and angle is reached (Fig. 8). Tighten the

adjustment knob clockwise to lock its position. NOTE: Do not use tilt function during winds.

To Tilt Canopy Horizontally:

IMPORTANT: PRIOR TO USING VERTICAL AND HORIZONTAL TILT FEATURE.

To avoid personal injury or damage to the umbrella, make sure the area behind you is clear

and free from any furniture or structure.

Insert crank handle into “Right/Left” socket in crank mechanism (Fig. 9). To tilt canopy right,

turn crank handle counter clockwise. To tilt canopy left, turn crank handle clockwise.

NOTE: We do not recommend tilting vertically and horizontally at a maximum tilt degree for a

prolonged period of time. Doing so may result in damage to umbrella.

(Fig. 3)

(Fig. 4)

STEP 2OPENING UMBRELLA

Position yourself behind umbrella. In the closed position, turn adjustment knob counter

clockwise (Fig. 3) and slide the adjustment knob upward (Fig. 4). Turn adjustment knob

clockwise to tighten and secure in place.

Right Left

Max

0˚

Max

Close Open

Cl Open

Right Left

Open

Max

0˚

Max

Insert crank handle into “Open/Close” socket in crank mechanism (Fig. 5). Turn crank

handle clockwise until the canopy is fully open (Fig. 6). CAUTION: Stop turning the crank

handle as soon as the umbrella canopy is completely open and the sleeve on the umbrella

center pole has reached its maximum height.

(Fig. 5)

(Fig. 6)

(Fig. 9)

(Fig. 8)

Right Left

Max

0˚

Max

Close Open

Open

(Fig. 7)

STEP 3TILTING UMBRELLA

To Tilt Canopy Vertically:

IMPORTANT: PRIOR TO USING VERTICAL AND HORIZONTAL TILT FEATURE.

To avoid personal injury or damage to the umbrella, make sure the area behind you is clear

and free from any furniture or structure.

Position yourself behind umbrella. Turn adjustment knob counter clockwise (Fig. 7) and

slide car up and downward until desired height and angle is reached (Fig. 8). Tighten the

adjustment knob clockwise to lock its position. NOTE: Do not use tilt function during winds.

To Tilt Canopy Horizontally:

IMPORTANT: PRIOR TO USING VERTICAL AND HORIZONTAL TILT FEATURE.

To avoid personal injury or damage to the umbrella, make sure the area behind you is clear

and free from any furniture or structure.

Insert crank handle into “Right/Left” socket in crank mechanism (Fig. 9). To tilt canopy right,

turn crank handle counter clockwise. To tilt canopy left, turn crank handle clockwise.

NOTE: We do not recommend tilting vertically and horizontally at a maximum tilt degree for a

prolonged period of time. Doing so may result in damage to umbrella.

STEP 1UMBRELLA ASSEMBLY

Two-persons recommended for team lift and to complete assembly.

With base cover in place or mount kit installed, lift umbrella up and insert the main frame

onto the installed rotating hub (Fig. 1). Secure umbrella into place by inserting the (2) bolts

and (2) washers and tighten using 6mm hexagon wrench provided (Fig. 2).

REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO

OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS.

Your umbrella is now ready for use!

NOTE: REFER TO SEPARATE BASE OR MOUNT KIT MANUAL

FOR BASE ASSEMBLY PRIOR TO PROCEEDING.

(Fig. 1) (Fig. 2)

Foot Pedal

Main Frame

Rotating Hub

360

(Fig. 10)

STEP 4ROTATING UMBRELLA

Place your foot on the foot pedal of the rotating hub and step-on the pedal to release

rotating lock (Fig. 10). Place hands on the main frame and rotate the umbrella frame

in either direction, in 90° increments. To lock position, step off the foot pedal to engage

rotating lock.

(Fig. 11) (Fig. 12)

STEP 5LIGHT ADAPTER FEATURE

To ATTACH Umbrella Light: (sold separately)

Loosen the light adapter built into the umbrella runner by turning counter-clockwise

(Fig. 11). After loosening, pull down light adapter post (Fig. 12) to attach the umbrella light

(sold separately).

To REMOVE Light and CLOSE adapter:

Hold the umbrella light, depress the clamp release button to release the clamp lock.

Remove umbrella light and gently push up the light adapter post back into umbrella runner

and tighten turning clockwise (Fig. 11).

NOTE: It may be necessary to lower umbrella to a reachable height to pull light adapter

down and attach umbrella light. It is not necessary to remove light to close umbrella.

IMPORTANT:

For free standing base applications, it is imperative to install the appropriate base for your

size cantilever. The minimum base weight recommended for the AG25T is 200 lbs.

Thank you for purchasing Treasure Garden’s AG25T Cantilever.

Please remove all contents from the package, inspect and review checklist.

Some parts may be included in the styrofoam packaging.

Do not discard any packaging or box until assembly is complete.

CHECKLIST

A - (1) 360°Rotating Hub I - (1) Crank Handle

B - (1) Foot Pedal J - (1) Canopy Support Beam

C - (1) Hardware Assembly K - (1) Finial

D - (1) Main Frame L - (1) Canopy

E - (1) Adjustment Knob M - (7) Spring Loaded Rib End Cap

F - (1) Open/Close Mechanism N - (1) Valance (optional)

G - (1) Tilt Mechanism O - (1) Light Adapter (light sold separately)

H - (1) Tilt Degree Scale P - (1) Protective Cover

IMPORTANT:

Prior to assembly it is important to decide on the location of the umbrella.

·Allow ample height to avoid damage to your umbrella during assembly and usage.

·Choose a location that is level and sturdy.

·Avoid any sloping of soft ground.

·Consider a location that will maximize the umbrella’s 360°rotating function. Placing the

umbrella between two entertaining areas is ideal.

CAUTION:

·Fully assembled, the umbrella weighs over 300 lbs. Moving umbrella fully assembled

will increase the risk of damage to your umbrella and/or can cause serious injury. We

recommend a two-person team for assembly and disassembly.

Close Open

Right Left

Open

Max

0˚

Max

6mm Hexagon

Wrench

CARE AND MAINTENANCE

• When not in use, close and cover umbrella with provided protective cover.

• Allow a wet canopy to dry while in open position, but do not leave unattended.

• If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge.

• Wipe sliding marks on the aluminum poles with a damp cloth.

Winter Storage:

• Store in a dry place.

After the Winter:

• Check the condition and function of the umbrella. Any defects must be repaired by a

professional.

Cl Open

Right Left

Open

Max

0˚

Max

(Fig. 13)

(Fig. 14) (Fig. 15)

STEP 6CLOSING UMBRELLA

Position yourself behind umbrella. Insert crank handle into “Open/Close” socket in crank

mechanism (Fig. 13). Turn crank handle counter clockwise until the canopy is closed

(Fig. 14). Turn adjustment knob counter clockwise and slide downward until umbrella is in

closed position. Tie string around canopy to secure canopy. Cover umbrella with provided

protective cover when not in use (Fig. 15). NOTE: Prior to closing ensure that the canopy

is in a level (non-tilt) position. Properly store umbrella when not in use. Close umbrella, tie

string around canopy and cover umbrella with provided protective cover.

TO PROPERLY FOLD CANOPY:

The canopy will last longer if you fold it as it was packed and shipped. This technique is

similar to the way a parachute is folded and is especially important when folding the canopy

for seasonal storage or when left in the closed position for an extended period of time.

Using this technique at all times will significantly extend the life of the canopy.

• When the umbrella has been fully closed, stand in front of the canopy

structure and begin the folding process by pulling out two panels

opposite the main frame. Pull the two panels together and roll tight into

the canopy.

• Once rolled tight, pull adjacent panels out one at a time and fold to the

center, alternating sides until all the panels have been pulled out from

the arms and folded into the center.

• Tie string around canopy and cover umbrella with provided protective

cover.

Assembly and Operation Guide

www.treasuregarden.com

v.05.18.21

AG25T CANTILEVER

AG25T 11.5’ octagon

AG25TSQ 10’ square

WARRANTY:

Treasure Garden warrants this product

(for residential use ONLY) to be free

from defects in original materials and

workmanship for a period of 1 year from

the date of purchase. If a defect in the

original material or workmanship appears

during the warranty period; Treasure

Garden will (at its discretion) repair or

replace the product without charge.

Simply contact your original authorized

Treasure Garden dealer with a description

of the defect. The dealer will verify the

defect and work closely with Treasure

Garden to obtain the necessary service.

In many cases, simple problems can

be solved with a replacement part that

can be shipped directly to the dealer for

professional installation / repair.

Tampering with or altering the product will

void warranty.

In the event that warranted factory service

is required, Treasure Garden will assume

the responsibility of the return freight

charges for the first year only.

Returned product that (upon receipt and

inspection) is deemed to be “not covered”

under our warranty, will be shipped / billed

at your expense.

This warranty gives you specific legal

rights, and you may have other rights

which vary from state to state.

RUST: Rust is a natural part of the aging

process of steel or iron based materials,

and is therefore NOT considered a defect.

NOTE: Failure caused by unreasonable or

abusive use, or failure caused by neglect

of reasonable and necessary care are not

covered by this warranty.

Additionally, acts of nature (including but

not limited to wind, hurricanes, tornadoes,

and storms) are not covered by this

warranty.

SAFETY PRECAUTIONS

• To reduce risk of personal injury in which a person is injured or harmed, and/or damage

to personal property, read and follow the Assembly Guide prior to assembling and

operating umbrella and base.

• Close and store the umbrella in windy conditions or when a storm approaches. Never

allow the umbrella to flap in the wind; this could cause personal injury, damage to

personal property, damage to umbrella and/or umbrella canopy. Do not use tilting

function during windy conditions.

• Keep umbrella secured to umbrella base at all times.

• Do not leave open umbrella unattended. If damage occurs, this is not covered by the

warranty.

• When adjusting the umbrella, make sure that no person(s), item(s) or personal property

are close to the umbrella. This is important to prevent injury or material damage.

• Do not allow children to play on or with umbrella or umbrella base.

• When adjusting or assembling the umbrella or umbrella base, make sure fingers, toes

or any other parts of the body are clear from moving parts. Failing to do so many result

in serious injury.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Treasure Garden Gartenmöbel Handbücher

Treasure Garden

Treasure Garden Monaco BKM100 Montageanleitung

Treasure Garden

Treasure Garden Cantilever AKZ13 Montageanleitung

Treasure Garden

Treasure Garden USA459 Montageanleitung

Treasure Garden

Treasure Garden Collar Tilt Montageanleitung

Treasure Garden

Treasure Garden Halo Bedienungsanleitung

Treasure Garden

Treasure Garden AKZP13 Montageanleitung

Treasure Garden

Treasure Garden AD45 Cantilever Montageanleitung

Treasure Garden

Treasure Garden BW50 Montageanleitung

Treasure Garden

Treasure Garden AKZ PLUS Montageanleitung

Treasure Garden

Treasure Garden AG5A Montageanleitung

Treasure Garden

Treasure Garden GLIDE TILT Montageanleitung

Treasure Garden

Treasure Garden AG19A Montageanleitung

Treasure Garden

Treasure Garden UM920 Montageanleitung

Treasure Garden

Treasure Garden Vienna Alu Teak Montageanleitung

Treasure Garden

Treasure Garden UM801 Montageanleitung

Treasure Garden

Treasure Garden UM8811RT Montageanleitung

Treasure Garden

Treasure Garden CP908 Bedienungsanleitung

Treasure Garden

Treasure Garden UM8100 Montageanleitung

Treasure Garden

Treasure Garden AUTO TILT Montageanleitung

Treasure Garden

Treasure Garden COMMERCIAL UCP409 Montageanleitung

Treasure Garden

Treasure Garden Glide Tilt UM970 Montageanleitung

Treasure Garden

Treasure Garden STARLUX COLLAR TILT Montageanleitung

Treasure Garden

Treasure Garden VIENNA ALU TEAK Montageanleitung

Treasure Garden

Treasure Garden AG19 Montageanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

PATIOJOY

PATIOJOY HW70624 Bedienungsanleitung

LAZBOY

LAZBOY 780-01291206-9 Bedienungsanleitung

RUSTA

RUSTA RHODOS Bedienungsanleitung

Patioflare

Patioflare Melody PF-10129 Series Bedienungsanleitung

Agio

Agio 2127092 Bedienungsanleitung

vita

vita Fairfeld Arbor Bedienungsanleitung

Seasons Sentry

Seasons Sentry UMB-822120 Leitfaden

JARDINICO

JARDINICO JCP.501 Bedienungsanleitung

Outdoor Home

Outdoor Home UMB-879530 Installationsanleitung

weinor

weinor Großschirm Lugano Series Handbuch

Costway

Costway PATIOJOY OP70681 Bedienungsanleitung

Atleisure

Atleisure seasons SENTRY UMB-546980M Leitfaden

Broyhill

Broyhill A222011906 Bedienungsanleitung

Alice's Garden

Alice's Garden TOUQUET PU2X3 Bedienungsanleitung

CARAVITA

CARAVITA SAMARA 2012 Bedienungsanleitung

Costway

Costway NP10245 Bedienungsanleitung

B&Q

B&Q Tobago Bedienungsanleitung

Extremis

Extremis INUMBRINA 380 Bedienungsanleitung