Treasure Garden AKZ PLUS Montageanleitung

Assembly and Operation Guide

www.treasuregarden.com

v.11.30.20

AKZ PLUS CANTILEVER

AKZP13LX 13’ octagon

AKZP13 13’ octagon

AKZPRT 10’ x 13’ rectangle

AKZP 11’ octagon

Thank you for purchasing Treasure Garden’s AKZ Plus Cantilever.

Please remove all contents from the package, inspect and review checklist.

Some parts may be included in the styrofoam packaging.

Do not discard any packaging or box until assembly is complete.

CHECKLIST

101

WARRANTY:

Treasure Garden warrants this product

(for residential use ONLY) to be free

from defects in original materials and

workmanship for a period of 2 years from

the date of purchase. If a defect in the

original material or workmanship appears

during the warranty period; Treasure

Garden will (at its discretion) repair or

replace the product without charge.

Simply contact your original authorized

Treasure Garden dealer with a description

of the defect. The dealer will verify the

defect and work closely with Treasure

Garden to obtain the necessary service.

In many cases, simple problems can

be solved with a replacement part that

can be shipped directly to the dealer for

professional installation / repair.

In the event that warranted factory service

is required, Treasure Garden will assume

the responsibility of the return freight

charges on warranted product for the first

year only.

Returned product that (upon receipt and

inspection) is deemed to be “not covered”

under our warranty, will be shipped / billed

at your expense.

This warranty gives you specific legal

rights, and you may have other rights

which vary from state to state.

RUST: Rust is a natural part of the aging

process of steel or iron based materials,

and is therefore NOT considered a defect.

NOTE: Failure caused by unreasonable or

abusive use, or failure caused by neglect

of reasonable and necessary care are not

covered by this warranty.

Additionally, acts of nature (including but

not limited to wind, hurricanes, tornadoes,

and storms) are not covered by this

warranty.

Loop Lock

Spring Loaded

Rib End Cap (8)

(5) Hub Bolts

(5) Washers

(1) 8mm Hexagon Wrench

(1) 6mm Hexagon Wrench

(1) 2.5mm Hexagon Wrench

A - (1) 360°Rotating Hub H - (1) Canopy Support Beam

B - (1) Foot Pedal I - (1) Canopy

C - (1) Crank Lift Handle J - (1) Light Adapter (light sold separately)

D - (1) Main Frame K - (1) Valance (optional)

E - (1) Tilt Lever L - (8) Spring Loaded Rib End Cap

F - (1) Main Frame Grip M - (1) Hardware Assembly

G - (1) Tilt Degree Scale N - (1) Power Supply* (Starlux style only)

O - (1) Protective Cover (not shown)

*NOTE: Use only the Power Supply included with umbrella. See page 9 for Safety Precautions.

IMPORTANT:

Prior to assembly it is important to decide on the location of the umbrella.

·Allow ample height to avoid damage to your umbrella during assembly and usage.

·Choose a location that is level and sturdy.

·Avoid any sloping of soft ground.

·Consider a location that will maximize the umbrella’s 360°rotating function. Placing the

umbrella between two entertaining areas is idea.

CAUTION:

·Fully assembled, the umbrella weighs over 500 lbs. Moving umbrella fully assembled

will increase the risk of damage to your umbrella and/or can cause serious injury. We

recommend a two-person team for assembly and disassembly.

SAFETY PRECAUTIONS

• Close and store the umbrella in windy conditions or when a storm approaches.

Never allow the umbrella to flap in the wind; this could damage the canopy.

• Do not leave open umbrella unattended. If damage occurs, this is not covered

by the warranty.

• When adjusting the umbrella, make sure that no person(s) or item(s) are close to the

umbrella. This is important to prevent injury or material damage.

Starlux Style Only:

• Do not operate the Starlux power switch or attempt to charge the umbrella in inclement

weather (rain, snow) so as to prevent damage to the electrical components.

• When Starlux lights are not in use, unplug power supply from umbrella and put the cap

back onto the plug to protect the electrical components inside.

Rechargeable Battery Pack (sold separately) and Power Supply:

• Discontinue battery usage if leakage is found. Contact your local authorized dealer for a

replacement.

• Do not disassemble rechargeable battery pack.

• Do not leave rechargeable battery pack in sun, it will affect battery life.

• Never use a third party battery or power supply. Doing so may increase risk of fire or

explosion. Contact your local authorized dealer for a replacement rechargeable battery

pack or power supply.

• During prolonged use, it is normal for the power supply to be warm to the touch. When

using power supply, avoid direct sunlight and exposure to moisture.

• Do not attempt to charge the umbrella in inclement weather (rain, snow) so as to

prevent damage to the electrical components.

CARE AND MAINTENANCE

• When not in use, close and cover umbrella with provided protective cover.

• Store rechargeable battery pack and power supply in dry place.

• Allow a wet canopy to dry while in open position, but do not leave unattended.

• If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge.

• Wipe sliding marks on the aluminum poles with a damp cloth.

Winter Storage:

• Store in a dry place.

After the Winter:

• Check the condition and function of the umbrella. Any defects must be repaired by a

professional.

Power Supply Information

Input voltage: 100~240VAC 50/60Hz 0.9AMax

Output: 24VDC 1.5A

17’ Cord

Rechargeable Battery Pack Information (sold separately)

Input: 24VDC 1.5A

Output: 20VDC 1.0A

STEP 1UMBRELLA ASSEMBLY

Two-persons recommended for team lift and to complete assembly.

With base cover in place or mount kit installed, insert the main frame onto the installed

rotating hub (Fig. 1); align tilt lever with foot pedal. Assembled in upright position, insert the

(2) bolts and (2) washers and tighten using 6mm hexagon wrench provided (Fig. 2). Install

the crank lift handle onto the mid-area of the main frame. Use the 2.5mm hexagon wrench

provided to lock in the small screw (Fig. 3).

REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO

OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS.

Your umbrella is now ready for use!

NOTE: REFER TO SEPARATE BASE OR MOUNT KIT MANUAL

FOR BASE ASSEMBLY PRIOR TO PROCEEDING.

6mm

Hexagon

Wrench

2.5mm

Hexagon

Wrench

(Fig. 1)

(Fig. 2)

(Fig. 3)

(BASE-13 option shown)

IMPORTANT:

For free standing base applications, it is imperative to install the appropriate base for your

size cantilever. The minimum base weight recommended for each size is:

·13’ and 10’ x 13’ AKZ Plus is 400 lbs.

·11’ AKZ Plus is 200 lbs.

(Fig. 4) (Fig. 5) (Fig. 6)

(Fig. 7) (Fig. 8) (Fig. 9)

(Fig. 10)

STEP 2OPENING UMBRELLA

Position yourself behind umbrella. Squeeze the main frame grip handle and slide handle

midway up main frame (Fig. 4). Release grip handle to lock into place. Slowly turn the crank

lift handle clockwise to open the umbrella (Fig. 5). Crank the handle an extra half turn to

lock the canopy structure into place. CAUTION: When cranking umbrella open, if you feel

resistance and the umbrella is not opening, do not force crank. Gently spread umbrella ribs

with hands, then continue to crank open. Once fully opened, squeeze the main frame grip

handle to release lock and continue to slide handle upward until desired height is reached

(Fig. 6).

WARNING: Do not continue to crank once umbrella canopy is completely open, it may

impair your ability to disengage the tilt lever. Keep hands free of mainframe while moving

grip handle up and down.

STEP 3UMBRELLA LIGHTS (STARLUX STYLE ONLY)

From the lower backside of the frame, remove plug cap (Fig. 7). Line up power supply

grooves to plug (Fig. 8) and insert power supply into plug. Secure plug by turning locking ring

clockwise (Fig. 9). Connect other end of power supply into wall outlet (Fig. 10).

STEP 7CLOSING UMBRELLA

Position yourself behind umbrella. Squeeze the main frame grip handle and slide handle

midway down main frame (Fig. 27). Release grip handle to lock into place. Slowly turn the

crank lift handle counter-clockwise until the canopy is fully closed (Fig. 28). Squeeze main

frame grip handle to release lock and continue to slide grip handle downward SLOWLY until

umbrella is fully closed in an upright position (Fig. 29) and locks into position.

NOTE: Prior to closing ensure that the canopy is in a level (non tilt) position. Properly store

umbrella when not in use. Close umbrella, tie string around canopy and cover umbrella with

provided protective cover.

(Fig. 27) (Fig. 28) (Fig. 29)

CARE AND MAINTENANCE

TO PROPERLY FOLD CANOPY:

The canopy will last longer if you fold it as it was packed and shipped. This technique is

similar to the way a parachute is folded and is especially important when folding the canopy

for seasonal storage or when left in the closed position for an extended period of time.

Using this technique at all times will significantly extend the life of the canopy.

• When the umbrella has been fully closed, stand in front of the canopy

structure and begin the folding process by pulling out two panels

opposite the main frame. Pull the two panels together and roll tight into

the canopy.

• Once rolled tight, pull adjacent panels out one at a time and fold to the

center, alternating sides until all the panels have been pulled out from

the arms and folded into the center.

• Tie string around canopy and cover umbrella with provided protective

cover.

NOTE: The transformer output power is 5VDC 2A. It is normal for transformer to get warm

after long period of use. Avoid sun and water on power supply to increase lifetime use. Be

sure not to drop transformer. NOTE: Use only the Power Supply provided.

STEP 4TILTING UMBRELLA

To Tilt Canopy Vertically:

IMPORTANT: PRIOR TO USING TILT FEATURE.

To avoid personal injury or damage to the umbrella, make sure the area behind you is clear

and free from any furniture or structure.

Position yourself behind umbrella. Squeeze main frame grip handle (Fig. 13) to disengage

from track (Fig. 14) and guide main frame grip down main frame until desired degree of

vertical shade is reached (maximum back angle of 40˚ from ground level) (Fig. 15). Release

grip handle to lock into place. WARNING: Make sure tilt is secure in track. Do not tilt

umbrella past the track. Keep hands free of main frame while moving grip handle up and

down.

Max. 40°

(Fig. 13) (Fig. 14) (Fig. 15)

Track

Turn umbrella lights on by pressing button located under plug (Fig. 11). Lights will initially

turn on high setting (Fig. 12). For low setting, press button once more. To turn off lights,

press button a third time. WARNING: We do not recommend use of lights while raining.

See Safety Precautions on page 9.

(Fig. 11) (Fig. 12)

When lights are not in use, unplug power supply from wall and umbrella. Store power

supply in dry, cool area to keep from damaging.

(Fig. 23) (Fig. 24)

(Fig. 25) (Fig. 26)

STEP 6LIGHT ADAPTER FEATURE

To Open Light Adapter:

• Loosen the light adapter built into the umbrella runner by turning counter-clockwise

(Fig. 23).

• After loosening, pull down light adapter post (Fig. 24).

To Open and Attach Umbrella Light: (light sold separately)

• Open the umbrella light and attach to light adapter post (Fig. 25).

• Snap to close (Fig. 26).

To Remove Umbrella Light and Close Light Adapter:

• Remove umbrella light from light adapter post (Fig. 25).

• Gently push up the light adapter post back into umbrella runner and tighten turning

clockwise (Fig. 23).

Note:

• It may be necessary to lower umbrella to a reachable height to pull light adapter down

and attach umbrella light.

• It is not necessary to remove light to close umbrella.

(Fig. 18)

(Fig. 19)

(Fig. 16)

Tilting Gears

PULL

(Fig. 17)

To Tilt Canopy Horizontally:

IMPORTANT: PRIOR TO USING TILT FEATURE.

To avoid personal injury or damage to the umbrella, make sure the area behind you is clear

and free from any furniture or structure.

Make sure canopy is fully OPEN. Position yourself in front of the tilt lever and pull loop lock

from main frame track (Fig. 16). Pull out further to disengage tilting gears and reveal gear

teeth (Fig. 17). Move the tilt lever to the left or right, opposite the desired tilt direction (Fig. 18).

Use the tilt degree scale as a guide (Fig. 19). Now, push forward slightly to re-engage tilting

gear teeth. Move tilt lever to center position (canopy should be moving also) and snap the

loop lock back into main frame track.

NOTE: We do not recommend tilting vertically and horizontally at a maximum tilt degree for a

prolonged period of time. Doing so may result in damage to umbrella.

Tilt Degrees

(Fig. 20)

(Fig. 21)

(Fig. 22)

STEP 5ROTATING UMBRELLA

Place your foot on the foot pedal of the rotating hub and step-on the foot pedal

to release rotating lock (Fig. 20). Place one hand on the main frame and one hand on

the tilt lever (Fig. 21), swivel the umbrella frame in either direction until desired position is

reached (Fig. 22). Step off the foot pedal to engage rotating lock and lock position (you will

hear the pedal click, as it reaches the next available lock position).

(Fig. 18)

(Fig. 19)

(Fig. 16)

Tilting Gears

PULL

(Fig. 17)

To Tilt Canopy Horizontally:

IMPORTANT: PRIOR TO USING TILT FEATURE.

To avoid personal injury or damage to the umbrella, make sure the area behind you is clear

and free from any furniture or structure.

Make sure canopy is fully OPEN. Position yourself in front of the tilt lever and pull loop lock

from main frame track (Fig. 16). Pull out further to disengage tilting gears and reveal gear

teeth (Fig. 17). Move the tilt lever to the left or right, opposite the desired tilt direction (Fig. 18).

Use the tilt degree scale as a guide (Fig. 19). Now, push forward slightly to re-engage tilting

gear teeth. Move tilt lever to center position (canopy should be moving also) and snap the

loop lock back into main frame track.

NOTE: We do not recommend tilting vertically and horizontally at a maximum tilt degree for a

prolonged period of time. Doing so may result in damage to umbrella.

Tilt Degrees

(Fig. 20)

(Fig. 21)

(Fig. 22)

STEP 5ROTATING UMBRELLA

Place your foot on the foot pedal of the rotating hub and step-on the foot pedal

to release rotating lock (Fig. 20). Place one hand on the main frame and one hand on

the tilt lever (Fig. 21), swivel the umbrella frame in either direction until desired position is

reached (Fig. 22). Step off the foot pedal to engage rotating lock and lock position (you will

hear the pedal click, as it reaches the next available lock position).

NOTE: The transformer output power is 5VDC 2A. It is normal for transformer to get warm

after long period of use. Avoid sun and water on power supply to increase lifetime use. Be

sure not to drop transformer. NOTE: Use only the Power Supply provided.

STEP 4TILTING UMBRELLA

To Tilt Canopy Vertically:

IMPORTANT: PRIOR TO USING TILT FEATURE.

To avoid personal injury or damage to the umbrella, make sure the area behind you is clear

and free from any furniture or structure.

Position yourself behind umbrella. Squeeze main frame grip handle (Fig. 13) to disengage

from track (Fig. 14) and guide main frame grip down main frame until desired degree of

vertical shade is reached (maximum back angle of 40˚ from ground level) (Fig. 15). Release

grip handle to lock into place. WARNING: Make sure tilt is secure in track. Do not tilt

umbrella past the track. Keep hands free of main frame while moving grip handle up and

down.

Max. 40°

(Fig. 13) (Fig. 14) (Fig. 15)

Track

Turn umbrella lights on by pressing button located under plug (Fig. 11). Lights will initially

turn on high setting (Fig. 12). For low setting, press button once more. To turn off lights,

press button a third time. WARNING: We do not recommend use of lights while raining.

See Safety Precautions on page 9.

(Fig. 11) (Fig. 12)

When lights are not in use, unplug power supply from wall and umbrella. Store power

supply in dry, cool area to keep from damaging.

(Fig. 23) (Fig. 24)

(Fig. 25) (Fig. 26)

STEP 6LIGHT ADAPTER FEATURE

To Open Light Adapter:

• Loosen the light adapter built into the umbrella runner by turning counter-clockwise

(Fig. 23).

• After loosening, pull down light adapter post (Fig. 24).

To Open and Attach Umbrella Light: (light sold separately)

• Open the umbrella light and attach to light adapter post (Fig. 25).

• Snap to close (Fig. 26).

To Remove Umbrella Light and Close Light Adapter:

• Remove umbrella light from light adapter post (Fig. 25).

• Gently push up the light adapter post back into umbrella runner and tighten turning

clockwise (Fig. 23).

Note:

• It may be necessary to lower umbrella to a reachable height to pull light adapter down

and attach umbrella light.

• It is not necessary to remove light to close umbrella.

(Fig. 4) (Fig. 5) (Fig. 6)

(Fig. 7) (Fig. 8) (Fig. 9)

(Fig. 10)

STEP 2OPENING UMBRELLA

Position yourself behind umbrella. Squeeze the main frame grip handle and slide handle

midway up main frame (Fig. 4). Release grip handle to lock into place. Slowly turn the crank

lift handle clockwise to open the umbrella (Fig. 5). Crank the handle an extra half turn to

lock the canopy structure into place. CAUTION: When cranking umbrella open, if you feel

resistance and the umbrella is not opening, do not force crank. Gently spread umbrella ribs

with hands, then continue to crank open. Once fully opened, squeeze the main frame grip

handle to release lock and continue to slide handle upward until desired height is reached

(Fig. 6).

WARNING: Do not continue to crank once umbrella canopy is completely open, it may

impair your ability to disengage the tilt lever. Keep hands free of mainframe while moving

grip handle up and down.

STEP 3UMBRELLA LIGHTS (STARLUX STYLE ONLY)

From the lower backside of the frame, remove plug cap (Fig. 7). Line up power supply

grooves to plug (Fig. 8) and insert power supply into plug. Secure plug by turning locking ring

clockwise (Fig. 9). Connect other end of power supply into wall outlet (Fig. 10).

STEP 7CLOSING UMBRELLA

Position yourself behind umbrella. Squeeze the main frame grip handle and slide handle

midway down main frame (Fig. 27). Release grip handle to lock into place. Slowly turn the

crank lift handle counter-clockwise until the canopy is fully closed (Fig. 28). Squeeze main

frame grip handle to release lock and continue to slide grip handle downward SLOWLY until

umbrella is fully closed in an upright position (Fig. 29) and locks into position.

NOTE: Prior to closing ensure that the canopy is in a level (non tilt) position. Properly store

umbrella when not in use. Close umbrella, tie string around canopy and cover umbrella with

provided protective cover.

(Fig. 27) (Fig. 28) (Fig. 29)

CARE AND MAINTENANCE

TO PROPERLY FOLD CANOPY:

The canopy will last longer if you fold it as it was packed and shipped. This technique is

similar to the way a parachute is folded and is especially important when folding the canopy

for seasonal storage or when left in the closed position for an extended period of time.

Using this technique at all times will significantly extend the life of the canopy.

• When the umbrella has been fully closed, stand in front of the canopy

structure and begin the folding process by pulling out two panels

opposite the main frame. Pull the two panels together and roll tight into

the canopy.

• Once rolled tight, pull adjacent panels out one at a time and fold to the

center, alternating sides until all the panels have been pulled out from

the arms and folded into the center.

• Tie string around canopy and cover umbrella with provided protective

cover.

SAFETY PRECAUTIONS

• Close and store the umbrella in windy conditions or when a storm approaches.

Never allow the umbrella to flap in the wind; this could damage the canopy.

• Do not leave open umbrella unattended. If damage occurs, this is not covered

by the warranty.

• When adjusting the umbrella, make sure that no person(s) or item(s) are close to the

umbrella. This is important to prevent injury or material damage.

Starlux Style Only:

• Do not operate the Starlux power switch or attempt to charge the umbrella in inclement

weather (rain, snow) so as to prevent damage to the electrical components.

• When Starlux lights are not in use, unplug power supply from umbrella and put the cap

back onto the plug to protect the electrical components inside.

Rechargeable Battery Pack (sold separately) and Power Supply:

• Discontinue battery usage if leakage is found. Contact your local authorized dealer for a

replacement.

• Do not disassemble rechargeable battery pack.

• Do not leave rechargeable battery pack in sun, it will affect battery life.

• Never use a third party battery or power supply. Doing so may increase risk of fire or

explosion. Contact your local authorized dealer for a replacement rechargeable battery

pack or power supply.

• During prolonged use, it is normal for the power supply to be warm to the touch. When

using power supply, avoid direct sunlight and exposure to moisture.

• Do not attempt to charge the umbrella in inclement weather (rain, snow) so as to

prevent damage to the electrical components.

CARE AND MAINTENANCE

• When not in use, close and cover umbrella with provided protective cover.

• Store rechargeable battery pack and power supply in dry place.

• Allow a wet canopy to dry while in open position, but do not leave unattended.

• If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge.

• Wipe sliding marks on the aluminum poles with a damp cloth.

Winter Storage:

• Store in a dry place.

After the Winter:

• Check the condition and function of the umbrella. Any defects must be repaired by a

professional.

Power Supply Information

Input voltage: 100~240VAC 50/60Hz 0.9AMax

Output: 24VDC 1.5A

17’ Cord

Rechargeable Battery Pack Information (sold separately)

Input: 24VDC 1.5A

Output: 20VDC 1.0A

STEP 1UMBRELLA ASSEMBLY

Two-persons recommended for team lift and to complete assembly.

With base cover in place or mount kit installed, insert the main frame onto the installed

rotating hub (Fig. 1); align tilt lever with foot pedal. Assembled in upright position, insert the

(2) bolts and (2) washers and tighten using 6mm hexagon wrench provided (Fig. 2). Install

the crank lift handle onto the mid-area of the main frame. Use the 2.5mm hexagon wrench

provided to lock in the small screw (Fig. 3).

REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO

OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS.

Your umbrella is now ready for use!

NOTE: REFER TO SEPARATE BASE OR MOUNT KIT MANUAL

FOR BASE ASSEMBLY PRIOR TO PROCEEDING.

6mm

Hexagon

Wrench

2.5mm

Hexagon

Wrench

(Fig. 1)

(Fig. 2)

(Fig. 3)

(BASE-13 option shown)

IMPORTANT:

For free standing base applications, it is imperative to install the appropriate base for your

size cantilever. The minimum base weight recommended for each size is:

·13’ and 10’ x 13’ AKZ Plus is 400 lbs.

·11’ AKZ Plus is 200 lbs.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Treasure Garden Gartenmöbel Handbücher

Treasure Garden

Treasure Garden AG19A Montageanleitung

Treasure Garden

Treasure Garden Glide Tilt UM970 Montageanleitung

Treasure Garden

Treasure Garden AG5A Montageanleitung

Treasure Garden

Treasure Garden AG19 Montageanleitung

Treasure Garden

Treasure Garden STARLUX COLLAR TILT Montageanleitung

Treasure Garden

Treasure Garden AKZ Bedienungsanleitung

Treasure Garden

Treasure Garden CP908 Bedienungsanleitung

Treasure Garden

Treasure Garden UM800LX Montageanleitung

Treasure Garden

Treasure Garden AG25TSQ Montageanleitung

Treasure Garden

Treasure Garden VIENNA ALU TEAK Montageanleitung

Treasure Garden

Treasure Garden AD45 Cantilever Montageanleitung

Treasure Garden

Treasure Garden GLIDE TILT Montageanleitung

Treasure Garden

Treasure Garden QUAD PULLEY LIFT UM8091 Montageanleitung

Treasure Garden

Treasure Garden Cantilever AKZ13 Montageanleitung

Treasure Garden

Treasure Garden BASE-13-00 Bedienungsanleitung

Treasure Garden

Treasure Garden Vienna Alu Teak Montageanleitung

Treasure Garden

Treasure Garden LUNA Bedienungsanleitung

Treasure Garden

Treasure Garden BSK120 Montageanleitung

Treasure Garden

Treasure Garden UC409 Montageanleitung

Treasure Garden

Treasure Garden AKZP13 Montageanleitung

Treasure Garden

Treasure Garden UM8100 Montageanleitung

Treasure Garden

Treasure Garden AG25T Montageanleitung

Treasure Garden

Treasure Garden BA150 Montageanleitung

Treasure Garden

Treasure Garden USA459 Montageanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

PATIOJOY

PATIOJOY HW70624 Bedienungsanleitung

LAZBOY

LAZBOY 780-01291206-9 Bedienungsanleitung

RUSTA

RUSTA RHODOS Bedienungsanleitung

Patioflare

Patioflare Melody PF-10129 Series Bedienungsanleitung

Agio

Agio 2127092 Bedienungsanleitung

vita

vita Fairfeld Arbor Bedienungsanleitung

Seasons Sentry

Seasons Sentry UMB-822120 Leitfaden

JARDINICO

JARDINICO JCP.501 Bedienungsanleitung

Outdoor Home

Outdoor Home UMB-879530 Installationsanleitung

weinor

weinor Großschirm Lugano Series Handbuch

Costway

Costway PATIOJOY OP70681 Bedienungsanleitung

Atleisure

Atleisure seasons SENTRY UMB-546980M Leitfaden

Broyhill

Broyhill A222011906 Bedienungsanleitung

Alice's Garden

Alice's Garden TOUQUET PU2X3 Bedienungsanleitung

CARAVITA

CARAVITA SAMARA 2012 Bedienungsanleitung

Costway

Costway NP10245 Bedienungsanleitung

B&Q

B&Q Tobago Bedienungsanleitung

Extremis

Extremis INUMBRINA 380 Bedienungsanleitung