TRENDnet TPL-305E Bedienungsanleitung

Table of Contents

Chapter 1: Product Overview .............................................................................3

1.1 Powerline Network Solution ........................................................................3

1.2 Package Contents.......................................................................................3

1.3 System Requirements.................................................................................4

1.4 Device Label...............................................................................................4

1.5 LEDs...........................................................................................................5

1.6 Ethernet Ports.............................................................................................6

Chapter 2: Product Installation ..........................................................................7

2.1 Initial Installation .........................................................................................8

2.2 Securing your Powerline Network ...............................................................9

2.3 Changing the Network Name/Security Key using the Sync Button............10

2.4 Adding the Powerline Adapter to an Existing Powerline Network..............11

Chapter 3: Overlapping Powerline Networks..................................................12

3.1 Move Powerline Adapters between different Powerline Networks...............12

Chapter 4: Powerline Configuration Utility......................................................13

4.1 Software Installation....................................................................................13

4.2 Using the Utility...........................................................................................16

Chapter 5: Troubleshooting .............................................................................19

Chapter 6: Specifications .................................................................................20

Chapter 1: Product Overview

The TPL-305E 3-Port 200Mbps Powerline AV Adapter is an excellent solution that can

be used to extend your network using your home or small office electrical wiring. In a home or

small office building, use 3-Port 200Mbps Powerline AV adapters to link multiple locations

without the need to run long Ethernet cables. Combined with a single broadband DSL/Cable

Internet connection, every room with electrical power outlets can provide easy access to your

high-speed Internet connection. With HomePlug®AV speeds of up to 200Mbps, this easy-to-

setup solution can provide fast streaming HD movies, online multiplayer games, and other data

intensive applications for today’s HD Entertainment Center demand.

Each TPL-305E 3-Port 200Mbps Powerline AV Adapter allows you to connect up to three

network enabled devices to a powerline network via Ethernet. In operation, the 3-Port 200Mbps

AV Adapter is completely transparent, and simply passes data between the Ethernet port and

the powerline network. Any Ethernet-enabled device may be connected to one of the three

integrated 10/100Mbps Auto-MDIX Ethernet ports.

1.1 Powerline Network Solution

Add high-speed Internet access to any room in your home with this 3-Port 200Mbps Powerline

AV Adapter. You can stream HD movies and music, play online multi-player games and much

more. The TPL-305E has three integrated 10/100Mbps Auto-MDIX ports so up to three network

enabled devices nearby can be networked simultaneously without the need for an additional

switch.

Note: This TPL-305E 3-Port 200Mbps Powerline AV Adapter needs to pair with at least one other HomePlug®AV

compatible powerline device. (e.g. TRENDnet Powerline AV products TPL-303E, TPL-304E, TPL-310AP, or

another TPL-305E.)

1.2 Package Contents

The product package should contain the following items:

TPL-305E

Multi-Language Quick Installation Guide

CD-ROM (Utility & User’s Guide)

Cat. 5 Ethernet Cable (1.5 m / 5 ft.)

If any of the parts are incorrect, missing, or damaged, contact your dealer. Keep the carton,

including the original packaging materials, in case you need to return the Powerline adapter for

repair.

1.3 System Requirements

CD-ROM drive

A Desktop or Laptop PC with Network Adapter Installed

Existing 10/100Mbps wired network when TPL-305E is used as a bridge device

Additional HomePlug®AV powerline adapter

(e.g. TRENDnet TPL-303E, TPL-304E, TPL-310AP, or another TPL-305E)

Powerline Configuration Utility System Requirements

Supported Operating Systems

CPU

Memory

Windows 7 (32/64-bit)

1GHz or above

1GB RAM or above

Windows Vista (32/64-bit)

800MHz or above

512MB RAM or above

Windows XP (32/64-bit)

300MHz or above

256MB RAM or above

1.4 Device Label

The device label can be located on the back of the device where the power prong is found.

Product Firmware Version

Product Hardware Version

Device Password (DPW)

Device MAC Address

Device Serial Number

Product Model

Power LED (PWR)

1.5 LEDs

The LED panel located on the front of the device consists of the status LEDs, Sync button, and

Reset button.

Sync Button

Powerline

Link/Act LED (PL)

Ethernet Link/Act

LED (1-3)

Reset Button

1.6 Ethernet Ports

There are three RJ-45 10/100Mbps Auto-MDIX Ethernet ports at the bottom of the device for

network connectivity to computers and network appliances (e.g. Game Console, IP Set Top

Box, network enabled TV, etc.) using the included Cat. 5 Ethernet cable.

LED

Color

Sequence

Definition

PWR (Power)

Green

Solid

Device powered On

N/A

Off

Device powered Off

PL (Powerline)

Note: LED color

indicates the

strength and

quality of the

powerline

connection

through the

electrical system

Green

Solid

Powerline Connected (Connection Quality is Best)

Blinking

Syncing or Powerline Data Transmitting/Receiving (Connection Quality is Best)

Amber

Solid

Powerline Connected (Connection Quality is Better)

Blinking

Powerline Data Transmitting/Receiving (Connection Quality is Better)

Red

Solid

Powerline Connected (Connection Quality is Good)

Blinking

Powerline Data Transmitting/Receiving (Connection Quality is Good)

N/A

Off

Powerline is not synced or connected

1-3 (Ethernet

Port)

Green

Solid

10/20 Mbps or 100/200Mbps (Half/Full Duplex) Connected (per port)

Blinking

10/20Mbps or 100/200Mbps (Half/Full Duplex) Data Transmitting/Receiving (per

port)

N/A

Off

Port Disconnected/No Ethernet Link

Button

Action

Function

(Sync)

Push/Hold for 2

sec

Initiate Sync/Connection and generate random network name/key on first

adapter (PWR LED will start blinking)

Match network name/key on secondary or additional adapter and connect to

first adapter. (PWR LED will start blinking)

Note: The secondary or additional powerline adapter’s Sync button must also be

pushed within 2 minutes (120 sec) of pushing the Sync button of the first adapter

in order to establish connectivity.

Push/Hold for 10

sec

Erases the network name/key

(All LEDs will turn off and turn back on)

Reset

Push/Hold for 1

sec

Reset device to factory defaults (All LEDs will turn off and turn back on)

Note: Will reset to the factory default private network name “HomePlugAV”

Ethernet Ports

*Note: The following factors may affect the powerline network’s connection quality:

Noise –Generated by appliances that are connected to your electrical system through power outlets that have high power

consumption requirements. (e.g. Microwaves, ovens, blow dryer, iron, dishwasher, etc.) The quality of your household

electrical wiring may also cause additional noise on your electrical system.

Distance –Long lengths of electrical wiring through your electrical system between connected powerline adapters.

Chapter 2: Product Installation

At factory default settings, a pair of TPL-305E 3-Port 200Mbps Powerline AV adapters

can be installed into any room in your home or small office with a wall power outlet, without the

need for additional software or configuration. To create a simple powerline network using a pair

TPL-305E powerline adapters, simply plug one of your TPL-305E adapters into a wall power

outlet in one room and plug the other TPL-305E adapter into an available wall power outlet in

another room to establish connectivity between the two rooms.

In order to share Internet connectivity through your powerline adapters, it is ideal to

install at least one powerline adapter in the room where your modem and router are located and

connect the powerline adapter to one of your router’s LAN ports via Ethernet. Any additional

powerline adapters that are installed and connected in other rooms will then share Internet

connectivity through your router. Once the powerline adapters are connected to each other

through the electrical system, any additional devices such as computers or network appliances

(e.g. Game Console, Blu-ray player, IP Set Top Box, network enabled TV, etc.) connected to

any of your powerline adapters via Ethernet can then communicate to each other as well as

share Internet connectivity through your router.

The example diagram shows a typical powerline network configuration in a home environment with 3 powerline

adapters installed in different rooms. The orange line represents the powerline connectivity established through

your home’s electrical system and the blue lines represent Cat. 5, 5e, 6 Ethernet connectivity to your network

enabled appliances such as a computer, router, or IP set top box connected to your television.

2.1 Initial Installation

The procedure describes how to create a basic powerline network between a pair of TPL-305E

powerline adapters and share Internet connection through a router to computers or network

appliances in another room.

Assuming your router is already installed and configured for Internet connectivity and the TPL-

305E powerline adapters are at factory default settings.

1. Plug one of the TPL-305E powerline adapters into an available wall power outlet in the room

where your router is located.

Warning: Do not plug the powerline adapter into a power strip that has surge protection. Doing so will degrade

power line performance. For best performance, plug all powerline adapters directly into a wall power outlet.

2. Connect one end of the Ethernet Cable into one of the Ethernet ports located at the bottom of

the TPL-305E and connect the other end of the Ethernet cable into one of the router’s LAN

ports.

3. Plug the second TPL-305E powerline adapter into an available wall power outlet in another

room where your computer or network appliance (e.g. Game Console, Blu-ray player, IP Set

Top Box, network enabled TV, etc.) is located.

4. Connect one end of the Ethernet Cable into one of the Ethernet ports located at the bottom of

the second TPL-305E and the other end of the Ethernet cable into the Ethernet port on your

computer or network appliance (e.g. Game Console, Blu-ray player, IP Set Top Box, network

enabled TV, etc.).

5. To verify connectivity between the TPL-305E powerline adapters, make sure that the PL LED

on each TPL-305E is on solid (Green, Amber, Red). Please refer to the LED section 1.5 for

details on the LED indicator.

6. You have successfully created a basic powerline network between a pair of TPL-305E

powerline adapters. All computers or network appliances connected to the powerline

adapters via Ethernet can now communicate to each other as well as access the Internet.

2.2 Securing your Powerline Network

The TPL-305E 3-Port 200Mbps Powerline AV Adapter has a default network name/security key

assignment of “HomePlugAV”. When connecting a pair of TPL-305E powerline adapters, both

powerline adapters will be assigned the default network/security key which allows the TPL-305E

powerline adapters to establish connectivity through your home or small office’s electrical

system without the need for additional software or configuration. For added security, the default

network name/security key can be modified using the TPL-305E Sync button covered in the

following section or through the use of the Powerline Configuration Utility in Chapter 4.

Note: The default network name/security key assigned to the TPL-305E is “HomePlugAV”. All powerline adapters

in the same powerline network must have the same network name/security key in order to establish connectivity. If

the network name/security keys are not the same for all powerline adapters on the same powerline network, the

adapter will NOT establish connectivity. TRENDnet Powerline AV models TPL-303E, TPL-304E, TPL-305E, TPL-

310AP, and TPL-401E all have the same default network name/security key assignment of “HomePlugAV”.

2.3 Changing the Network Name/Security Key using the Sync Button

The procedure describes how to change the network name/security key between a pair of TPL-

305E powerline adapters. This procedure can also be used to establish connectivity between

two powerline adapters that are currently disconnected and change the default network

name/security key simultaneously.

Assuming your TPL-305E powerline adapters are already plugged into wall power outlets and

either currently connected or disconnected to each other.

1. Push and hold the Sync button on one of the TPL-305E powerline adapters for 10

seconds and release it. All LEDs will turn off and turn back on. This will erase the current

network name/security key assigned to the first powerline adapter.

2. Push and hold the Sync button on the other TPL-305E powerline adapter for 10 seconds

and release it. All LEDs will turn off and turn back on. This will erase the current network

name/security key assigned to the second powerline adapter.

3. Push and hold the Sync button on the first TPL-305E powerline adapter for 2 seconds

and release it. The PWR LED will start blinking. This will initiate sync/connection and

generate a random network name/security key assignment to the first powerline adapter.

4. Within 2 minutes (120 sec), push and hold the Sync button on the second TPL-305E

powerline adapter for 2 seconds and release it. The PWR LED will start blinking. This will

establish connectivity between the two powerline adapters by assigning the second powerline

adapter’s network name/security key to match the network name/security key of the first

powerline adapter.

5. To verify connectivity between the two powerline adapters, make sure that the PL LED on

each powerline adapter is on solid (Green, Amber, Red). Please refer to the LED section 1.5

for details on the LED indicator.

Andere Handbücher für TPL-305E

Inhaltsverzeichnis

Andere TRENDnet Adapter Handbücher

TRENDnet

TRENDnet TE-16PCTplus Bedienungsanleitung

TRENDnet

TRENDnet TBW-105UB Bedienungsanleitung

TRENDnet

TRENDnet TEW-623PI Bedienungsanleitung

TRENDnet

TRENDnet TBW 106 Bedienungsanleitung

TRENDnet

TRENDnet TEW-649UB - Mini Wireless N Speed USB 2.0... Bedienungsanleitung

TRENDnet

TRENDnet HotFlash TEW-429UF Bedienungsanleitung

TRENDnet

TRENDnet TBW-107UB Bedienungsanleitung

TRENDnet

TRENDnet TU-PS2 Bedienungsanleitung

TRENDnet

TRENDnet Powerline 1300 AV2 Adapter Bedienungsanleitung

TRENDnet

TRENDnet TBW-104UB Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCISX Bedienungsanleitung

TRENDnet

TRENDnet TBW-101UB Bedienungsanleitung

TRENDnet

TRENDnet TEW-645UB Bedienungsanleitung

TRENDnet

TRENDnet TBW-110UB Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCBUSR Bedienungsanleitung

TRENDnet

TRENDnet TU2-IDSA Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCISXplus Bedienungsanleitung

TRENDnet

TRENDnet TVP-SP5G Bedienungsanleitung

TRENDnet

TRENDnet TEW-509UB Bedienungsanleitung

TRENDnet

TRENDnet TBW-106UB Bedienungsanleitung

TRENDnet

TRENDnet TEW-649UB - Mini Wireless N Speed USB 2.0... Bedienungsanleitung

TRENDnet

TRENDnet TEW-648UBM Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX2 Bedienungsanleitung

TRENDnet

TRENDnet TPL-304E Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung