TRENDnet TE100-P1U Bedienungsanleitung

TE100-P1U

3.01

Quick Installation Guide

Table of Contents

English 1

1. Before You Start 1

2. How to Install 2

3. Configure the Print Server 3

4. Add the Printer to your computer 5

Troubleshooting 7

Version 08.01.2012

1. Before You Start

CD-ROM Drive

Router

An available DHCP Server – routers usually have a built-in DHCP server

PS Utility/PS Wizard Requirements

Windows 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit), 2003 Server, 2000, ME,

98SE

Package Contents

TE100-P1U

CD-ROM (Utility and User's Guide)

Multi-Language Quick Installation Guide

Power Adapter (5V DC, 2.5A)

System Requirements

Supported Operating Systems CPU Memory

Windows 7 (32/64-bit)

Windows Vista (32/64-bit)

Mac OS X (10.6)

Windows XP (32/64-bit) /

2003 Server / 2000 / ME / 98SE

1GHz or above

800MHz or above

Intel Processor

300MHz or above

1GB RAM or above

512MB RAM or above

1GB RAM or above

256MB RAM or above

Mac OS X (10.5)

Mac OS X (10.4)

Mac OS X (10.1-10.3)

867MHz or above

333MHz or above

300MHz or above

512MB RAM or above

256MB RAM or above

2. How to Install

4. Power ON the printer.

Note: Please power OFF your printer before connecting it to the print server. Then turn

on your printer after you make your hardware connections.

1. Connect a RJ-45 network cable from a Switch/

Router to the LAN port of the Print Server.

2. Connect the USB Printer to the USB port of the

Print Server.

3. Connect the Power Adapter to the Print Server

and then to a power outlet.

1. Insert the Utility CD-ROM into your computer's

CD-ROM Drive.

3. Configure the Print Server

Note: The Print Server can be managed using the PS-Utility or a web browser. For MAC

users, change your computers IP address to 192.168.0.X (where X is an available

number from 2-254). Since the Print Server's default IP address is 192.168.0.1, make

sure no other network devices are assigned an IP address of 192.168.0.1. Then enter

http://192.168.0.1 in your web browser to access the Print Server's Web Utility.

For Windows Users

2. Click Run Autorun.exe (Windows 7/Vista only).

3. Click Install Utility  PS Utility.

6. Click OK.

Print Server configuration is now complete.

4. Follow the InstallShield Wizard instructions.

Click Finish.

5. Select the Print Server and click Change IP

Address. Manually assign the IP Address of

the Print Server and then click OK.

Note: The IP Address must match the network

segment of your network.

7. Click Show Web Setup.

4. Add the Printer to your computer

Note: For printing instructions for Windows ME, 98SE and Mac OS X, please consult

the User's Guide included on the Utility CD-ROM.

Windows 7/Vista/2003 Sever/XP/2000

2. Select the print server, select the desired port

and then click Add Printer.

3. Click Select from manufacturer list. Select

the appropriate driver for your printer and then

click Next.

1. Click PS Wizard and then click

Win 7/Vista/2003/XP/2000.

8. Repeat steps 1 to 7 to add the printer to other

computers on the network.

Add Printer is now complete.

For detailed information regarding the TE100-P1U configuration and advanced settings,

please refer to User's Guide on the Utility CD-ROM, or TRENDnet's website at

http://www.trendnet.com.

To ensure the highest level of customer service and support, please take a moment to

Thank you for choosing TRENDnet.

4. Click Next.

5. Click Print Test Page.

7. Click Finish.

6. Click OK.

1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu does

not appear automatically. What should I do?

1. For Windows 7, if the installation menu does not appear automatically, click on the Windows

Icon on the bottom left hand corner of the screen, click the “Search programs and files” box,

type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter assigned to your CD-ROM

Driver, and then press the ENTER key on your keyboard

2. For Windows Vista, if the installation menu does not appear automatically, click Start, click the

Start Search box, type D:\autorun.exe where "D" in "D:\autorun.exe" is the letter

assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard.

3. For 98SE/XP/2000, if the window does not appear automatically, click Start, click Run and

type D:\autorun.exe where “D” in “D:\autorun.exe” is the letter assigned to your CD-ROM Drive,

and then press the ENTER key on your keyboard.

2. The PS Wizard / PS Utility is unable to see my print server. What should I do?

1. Double check your hardware connections; make sure that the print server and printer are

powered ON and are properly connected.

2. Click Discover.

3. Disable any software firewall programs (e.g. ZoneAlarm). If your computer is running

Windows 7, XP, or Vista, disable the built in firewall program.

3. My printer does not print the entire document. What should I do?

Windows 7

1. Click on the Windows icon on the bottom left-hand corner of the screen.

2. Click Devices and Printers.

3. Right click on the printer and select Printer Properties.

4. Click the Advanced tab.

5. Uncheck Enable advanced printing features.

6. Click Apply.

7. Click OK.

Windows Vista

1. Click on the Windows icon on the bottom left-hand corner of the screen.

2. Click Control Panel.

3. Click Classic View.

4. Click Printers.

5. Right click on the printer and select Properties.

6. Click the Advanced tab.

7. Uncheck Enable advanced printing features.

8. Click Apply.

9. Click OK.

Troubleshooting

4. I successfully added a printer to my computer and I can print a test page, but I cannot print

anything from Microsoft Word or other applications.

Make sure the printer is set as your default printer.

1. On Windows 7, click the Windows icon  Devices and Printers and verify that your printer icon

has a check on it.

2. On Windows Vista, click the Start Icon  Control Panel  Classic View  Printers and verify

that your printer icon has a check on it.

3. On Windows XP/2000/2003/98SE Server, click Start and then click Printers & Faxes, verify that

your printer icon has a check on it.

5. I configured my print server to automatically receive an IP Address from a DHCP server, and

now I cannot go into the Print Server's web utility.

1. Open PS Wizard (See 4. Add the Printer to your PC) to locate your print server's IP Address.

2. For MAC users, press the Reset button at the back of the TE100-P1U, hold the button for 15

seconds, release the button, and enter in a web browser to access the web http://192.168.0.1

utility feature.

6. How do I setup the TE100-P1U on a Mac?

Type in http://192.168.0.1 in you browser to logon to the built-in web configuration

If you still encounter problems or have any questions regarding the TE100-P1U, please contact

TRENDnet's Technical Support Department.

Andere Handbücher für TE100-P1U

Inhaltsverzeichnis

Andere TRENDnet Druckserver Handbücher

TRENDnet

TRENDnet TEW-P1PG - Wireless Parallel Print Server Bedienungsanleitung

TRENDnet

TRENDnet TEW-P1P Bedienungsanleitung

TRENDnet

TRENDnet TE100-P1P - Parallel Print Server Bedienungsanleitung

TRENDnet

TRENDnet TE100-MFP1 Bedienungsanleitung

TRENDnet

TRENDnet TE100-P1U Bedienungsanleitung

TRENDnet

TRENDnet TE100-P21 Bedienungsanleitung

TRENDnet

TRENDnet TEW-P1U1P Bedienungsanleitung

TRENDnet

TRENDnet TEW-P1U Bedienungsanleitung

TRENDnet

TRENDnet TE100-P1P - Parallel Print Server Bedienungsanleitung

TRENDnet

TRENDnet TEW-P21G Bedienungsanleitung

TRENDnet

TRENDnet TE100-P1U Bedienungsanleitung

TRENDnet

TRENDnet TE100-MP1U - Multi-Function Print Server Bedienungsanleitung

TRENDnet

TRENDnet TEW-MFP1 Bedienungsanleitung

TRENDnet

TRENDnet TEW-P1PG SHEETS Installationsanleitung

TRENDnet

TRENDnet TEW-P1PG SHEETS Bedienungsanleitung

TRENDnet

TRENDnet TEW-MP2U - Wireless Multi-Function Print... Bedienungsanleitung

TRENDnet

TRENDnet TE100-PS1plus Bedienungsanleitung

TRENDnet

TRENDnet TE100-PIU Bedienungsanleitung

TRENDnet

TRENDnet TE100-P1P - Parallel Print Server Bedienungsanleitung

TRENDnet

TRENDnet TW100-P1W1 Bedienungsanleitung

TRENDnet

TRENDnet TE100-P2U1P Bedienungsanleitung

TRENDnet

TRENDnet TE100-MFP1 Bedienungsanleitung

TRENDnet

TRENDnet TEW-PS3 Bedienungsanleitung

TRENDnet

TRENDnet TEW-P1U1P Bedienungsanleitung

Beliebte Druckserver Handbücher anderer Marken

Digitus

Digitus DN-13003-1 Bedienungsanleitung

Edimax

Edimax PS-1206PWg Bedienungsanleitung

Intellinet

Intellinet 509077 Bedienungsanleitung

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Zonet

Zonet ZPS1000 Bedienungsanleitung

Axis

Axis 140 BJC Bedienungsanleitung

HP Jetdirect 280m - 802.11b Wireless Print... Bedienungsanleitung

MicroNet

MicroNet SP766W Bedienungsanleitung

NETGEAR

NETGEAR PS104 - Hub - EN Bedienungsanleitung

Axis

Axis AXIS 1610 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Axis

Axis 5600+ Bedienungsanleitung

LevelOne

LevelOne WPS-9123 Bedienungsanleitung

NETGEAR

NETGEAR PS105 Bedienungsanleitung

Xerox

Xerox FreeFlow Print Server V9 SP3 Bedienungsanleitung

SEH

SEH primos Bedienungsanleitung

D-Link

D-Link DP-101P+ Bedienungsanleitung