TRENDnet TV-IP252P - SecurView PoE Dome Internet Camera... Bedienungsanleitung

- 1 -

PREFACE

Thank you for purchasing the TV-IP252 SecurView PoE Dome

Internet Camera, a standalone system that can be connected

directly to an Ethernet or Fast Ethernet network.

The camera features the latest Motion JPEG and MPEG-4 image

technology, advanced management functionality, and GPIO

connectors (e.g. connecting to the door sensors or alarm bells),

allowing you to record streaming video (Motion JPEG or MPEG-

4 ), enable motion detection, and setup automated FTP/Email/

Network Storage service for security.

The audio function (connected external microphone and audio-out

device like the active speaker) of the camera allows you to

deliver/receive sound to/from the camera. In addition, the superior

lens and hardware design enable the camera to capture high

quality images even in the low-lux condition.

Compared to the conventional PC Camera, the camera features a

built-in CPU and Web-based solutions that can provide a cost-

effective solution to transmit the real-time high-quality video

images and sounds synchronously for monitoring. The camera

can be managed remotely, so that you can use a Web browser to

access and control it from any desktop/notebook computer over

the Intranet or Internet.

The simple and versatile installation allows you to integrate it into

your network environment easily. With comprehensive

applications supported, the camera is your best solution for

demanding surveillance and remote monitoring applications.

- 2 -

This User Guide provides you with the instructions and

illustrations on how to use your camera, which includes:

Chapter 1 Introduction to Your Camera describes the features

of the camera. You will also know the components

and functions of the camera.

Chapter 2 Hardware Installation helps you install the camera

according to your application environment. You can

use this camera at home, at work, any where you

want.

Chapter 3 Accessing the Camera lets you start using your

camera without any problems. The camera can be

set up easily and work within your network

environment instantly.

Chapter 4 Configuring the Camera guides you through the

configuration of the camera using the Web browser

on your PC.

Chapter 5 Using SecurView™ shows you the detail instructions

on operating SecurView™ software.

Appendix Provides the specification of the camera and some

useful information for using your camera.

NOTE The illustrations and configuration values in this guide are

for reference only. The actual settings depend on your

practical application of the camera.

- 3 -

Contents

PREFACE.........................................................................1

CHAPTER 1.....................................................................5

INTRODUCTION TO YOUR CAMERA.......................5

1.1 CHECKING THE PACKAGE CONTENTS ...................................5

1.2 GETTING TO KNOW YOUR CAMERA .....................................6

1.3 FEATURES AND BENEFITS.....................................................9

1.4 SYSTEM REQUIREMENT ......................................................11

CHAPTER 2...................................................................12

HARDWARE INSTALLATION...................................12

2.1 APPLICATIONS OF THE CAMERA .........................................12

2.2 INSTALLING THE CAMERA ..................................................13

ACCESSING THE CAMERA.......................................17

3.1 USING IPSETUP...................................................................17

3.2 ACCESSING TO THE CAMERA ..............................................22

3.3 CONFIGURING THE IP ADDRESS OF THE PC........................26

CHAPTER 4...................................................................27

CONFIGURING THE CAMERA .................................27

4.1 USING THE WEB CONFIGURATION......................................27

4.2 USING SMART WIZARD.......................................................28

4.3 BASIC SETUP.......................................................................31

4.4 NETWORK SETTINGS...........................................................35

4.5 SETTING UP VIDEO &AUDIO ..............................................42

4.6 EVENT SERVER CONFIGURATION .......................................47

4.7 MOTION DETECT.................................................................52

4.8 EVENT CONFIG....................................................................53

4.9 TOOLS.................................................................................59

CHAPTER 5...................................................................63

CHAPTER 6...................................................................90

APPENDIX.....................................................................90

- 4 -

A.1 SPECIFICATION....................................................................90

A.2 GLOSSARY OF TERMS .........................................................92

- 5 -

CHAPTER 1

INTRODUCTION TO YOUR

CAMERA

1.1 Checking the Package Contents

Check the items contained in the package carefully. You should

have the following:

TV-IP252P

Power Adapter (12V DC, 1.5A)

Mounting Kit

Cat. 5 Ethernet Cable (1.8m / 6ft.)

GPIO Adapter

CD-ROM (Utility & User’s Guide)

Multi-Language Quick Installation Guide

NOTE If there is any item damaged or missing, please contact

your local authorized dealer for replacement.

- 6 -

1.2 Getting to Know Your Camera

Physical Components

Connectors

Power: Connects the power adapter to supply power to

the camera.

GPIO: Connects the external device that features

additional controlling function, such as motion detection,

event triggering, alarm notification, and a variety of

external control functions.

Before connecting the external device for GPIO

function, you have to attach the provided external GPIO

connectors to the device.

Dome cover













Connectors

- 7 -

Mic In: Connects an external microphone to receive the

on-the-spot sound where the camera is installed. (Pink

Connector)

Audio Out: Connects an external audio device (such

as the active speaker) to deliver sound via the camera.

(Green Connector)

TV Out: The BNC connector is used to connect the

composite video input of external video device.

LAN: Plugs the provided Ethernet cable to connect to

your local area network (LAN). The LAN port of the

camera supports the NWay protocol so that the camera

can detect the network speed automatically.

Connecting Cables

- 8 -

Inside Components

Reset button: Press the button to restart the camera.

Press and hold the button for five seconds, the camera will

resume the factory default settings.

LED indicators

Power

indicates the camera is powered

on with the steady amber light.

-Link indicates the camera’s network

connectivity with the flashing green light.

Link & Power switches:

The two switches allow you to turn off the

LED indicators manually.

Unscrew the four screws to

disassemble the Dome cover.

Lens

with the

adjustable base

Reset button

LED indicators

Link & Power switches

- 9 -

1.3 Features and Benefits

MPEG4/MJPEG Dual-codec Supported

The camera provides you with excellent images by the

MPEG4/MJPEG dual-codec selectable technology, allowing

you to adjust image size and quality, and bit rate according

to the networking environment.

Flexible Audio Capability

The camera allows you to connect the external microphone

to receive on-the-spot audio via the Internet, allowing you to

monitor the on-site voice. In addition, you can connect an

external active speaker to the camera to speak through the

camera (supporting mono audio only).

Supports RTSP

The camera supports RTSP (Real Time Streaming

Protocol), which is a technology that allows you to view

streaming media via the network. You can view the real-

time video with the Quick Time player or RealPlayer. To

view the real-time streaming image on your computer, open

the Web browser and enter the RTSP link:

rtsp://(IP address of the camera)/mpeg4.

Remote Control Supported

By using a standard Web browser or the bundled Ultra

View software application, the administrator can easily

change the configuration of the camera via Intranet or

Internet. In addition, the camera can be upgraded remotely

when a new firmware is available. The users are also

allowed to monitor the image and take snapshots via the

network.

Andere Handbücher für TV-IP252P - SecurView PoE Dome Internet Camera...

Inhaltsverzeichnis

Andere TRENDnet Sicherheitskamera Handbücher

TRENDnet

TRENDnet TV-IP252P - SecurView PoE Dome Internet Camera... Bedienungsanleitung

TRENDnet

TRENDnet TV-IP252P - SecurView PoE Dome Internet Camera... Bedienungsanleitung

TRENDnet

TRENDnet TV-H400 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP551WI Bedienungsanleitung

TRENDnet

TRENDnet TV-IP121W Bedienungsanleitung

TRENDnet

TRENDnet 15-AH28B Bedienungsanleitung

TRENDnet

TRENDnet TV-IP312WN Bedienungsanleitung

TRENDnet

TRENDnet TV-IP201P Bedienungsanleitung

TRENDnet

TRENDnet TV-IP851WC Bedienungsanleitung

TRENDnet

TRENDnet TV-IP325PI Bedienungsanleitung

TRENDnet

TRENDnet TV-IP201 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP651W Bedienungsanleitung

TRENDnet

TRENDnet TV-IP400W - Wireless Advanced Pan Bedienungsanleitung

TRENDnet

TRENDnet TV-IP430PI Bedienungsanleitung

TRENDnet

TRENDnet TV-IP410PI Bedienungsanleitung

TRENDnet

TRENDnet TV-IP301 - ProView Advanced Day/Night Internet Surveillance... Bedienungsanleitung

TRENDnet

TRENDnet TV-IP501W Bedienungsanleitung

TRENDnet

TRENDnet TV-IP400 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP410WN Bedienungsanleitung

TRENDnet

TRENDnet TV-IP522P Bedienungsanleitung

TRENDnet

TRENDnet TV-IP762IC Bedienungsanleitung

TRENDnet

TRENDnet TV-IP422 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP110WN Bedienungsanleitung

TRENDnet

TRENDnet TV-IP310PI Merkblatt

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung