Trinity TLS-4804 Bedienungsanleitung

TRINITY 56” ROLLING WORKBENCH – STAINLESS STEEL

Model # TLS-4804 (Stainless Body)

TLS-4805 (Black Body)

OWNER’S MANUAL

Everything in its place.®

Your TRINITY 56in Stainless Steel Workbench should include the following parts. Please

inspect box contents to ensure you have received all components.

If you are missing any parts, need assistance with assembly or have questions, please contact

TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be

requested online via our “Contact Us” section at www.trinityii.com.

You will need 10mm wrench (for handles) and 14mm wrench (for casters) for assembly. Not

included.

PARTS LIST

SIDE HANDLE (2)

B C

CASTER BOLT (16)

M10

LINER (7)

HANDLE BOLT (12)

LOCKING

CASTER (2)

NON-LOCKING

CASTER (2)

KEY (2)

WORKBENCH (1)

SHELF (1)

ASSEMBLY INSTRUCTIONS

Position SIDE HANDLE (B) over pre-installed

nuts on the side of WORKBENCH (A). Insert

HANDLE BOLTS (C) through holes on SIDE

HANDLE (B). Use a 10mm wrench to tighten

HANDLE BOLTS (C) to WORKBENCH (A).

Repeat these instructions to install the other

SIDE HANDLE (B).

STEP 1

STEP 2

10mm

A (1) B (2) C (12)

Location of parts:

1) HANDLES (B) / FASTENERS (C/F) /

CASTER (D/E) / LINERS (G) / KEYS

(H) are all in accessory boxes inside

the lowest drawer. KEYS (H) are

taped outside the caster box.

NOTE: Drawer lock and cabinet

lock use different keys, please

match code on lock to the code

on the key

2) SHELF (I) is upside down at the

bottom inside the cabinet.

ASSEMBLY INSTRUCTIONS

STEP 3

D (2) E (2) F (16)

Lay WORKBENCH (A) on its backside. Two

people are needed. Do NOT attempt this alone.

Position LOCKING CASTERS (D) on the side of

the WORKBENCH (A) of your choice and align

holes to pre-installed nuts on the underside of

WORKBENCH (A). Use a 14mm socket wrench

to fully tighten CASTER BOLT (F) to

WORKBENCH (A).

Repeat above step to install the NON-LOCKING

CASTERS (E).

Notes:

* Make sure to install both of the LOCKING

CASTERS (D) on the same side.

** For ease of use, place LOCKING CASTERS

(D) on the side you will regularly push or pull.

*** If you plan to push the Tool Chest against a

wall, place LOCKING CASTERS (D) on the front

long side for ease of access.

14mm

Carefully lift Workbench upright. Two people

are needed. Do NOT attempt this alone.

SHELF (I) is shipped upside down at the

bottom inside the cabinet. Tilt SHELF (I)

diagonally and remove from the cabinet. Flip

it over so the flat surface faces up and make

sure the tabs are on 2 sides.

Tilt SHELF (I) diagonally to move it to the

desired position. Once at the desired height,

secure SHELF (I) by pushing down on all 4

corners until SHELF (I) engages fully with the

tabs.

I (1)

STEP 4

Position Tab

ASSEMBLY INSTRUCTIONS

STEP 5

Simply place LINERS (G) in each drawer

and on each shelf. G (7)

USAGE INSTRUCTIONS

DRAWER REMOVAL

DRAWER REPLACEMENT

Pull the drawer out so that it is almost fully extended. On the RIGHT-hand side, push the black

release lever DOWN. On the LEFT-hand side, pull the black release lever UP. While holding

the levers as instructed, pull the drawer forward until released from the slides attached to the

Workbench (“Workbench Slides”).

Note: The slides attached to the drawer (“Drawer Slides”) are an integral part of the drawer and

must be removed along with the drawer itself.

To replace the drawer, pull the slides out completely. Insert the brackets on each side of the

Drawer Slides into the corresponding slots on the Workbench Slides, making sure they are

properly positioned. Once the brackets are inserted into the slots, completely close the drawer

to set all slides in their proper positions.

SERVICE PARTS LIST –TLS-4804 / TLS-4805

Part Number Description Part Number Description

1) PBK-03-001-1617 Inner Shelf 11) XBK-22-001-3316 Drawer Liner

2) LNA-06-001-5619 Wood Top 12) XBK-22-001-1617 Shelf Liner

3) ZSV-01-001-0612 Handle Bolt 13) ZSV-99-002-5020 Non-locking Caster

4) XSV-05-001-0900 Side Handle 14) XBS-07-001-3511 Large Drawer

5) AMA-05-002-2350 Door Handle 15) XBS-07-001-3505 Medium Drawer

6) XBS-08-001-1726 Door 16) XBK-23-001-2505 End Cap

7) ZSV-12-002-1575 Slide (workbench side) 17) AMA-05-002-3325 Drawer Handle

8) ZSV-12-001-1575 Slide (drawer side) 18) XBS-07-001-3503 Small Drawer

9) ZSV-01-001-1020 Caster Bolt 19) CSV-11-001-0XXX Lock

10) ZSV-99-001-5020 Locking Caster 20) XBK-10-001-0XXX Key

TRINITY Customer Service provides the following replacement parts:

NOTE: Replacement keys may be ordered using the code shown on the face of

the lock. The Drawer and Door Lock may have different key codes.

WARNINGS

1. Read and understand all instructions. Failure to follow all instructions may

result in injury and/or damage.

2. The warnings, cautions, and instructions discussed in this manual cannot

cover all possible conditions or situations that may occur. The user must

always be aware of their environment and ensure that they use the product in a

safe and responsible manner.

3. Use the appropriate wrenches to tighten casters completely. Failure to do as

instructed could result in the caster stem(s) to break thereby causing the

workbench to collapse.

4. Do NOT modify the product in any way. Unauthorized modification may impair

the function and/or safety of the product, and may affect the life of the product.

5. Check for damaged parts. Before using this product, carefully check that all parts

are in good condition, and that the product will operate properly and perform its

intended function. Check for damaged parts and any other conditions that may

affect the operation of this product. Replace damaged or worn parts, and never

use this product with a damaged part.

6. Do NOT overload the product.

7. Lock the casters when leaving workbench in stationary position.

8. Lock the drawers and door before moving the workbench.

9. Do NOT open more than one drawer at a time. Tipping can occur.

10. Do NOT step on open drawers.

11. Do NOT let children play near workbench.

Weight capacity per drawer 100 lb

Weight capacity per shelf 75 lb

Total weight capacity of tool chest 2200 lb

CARE AND MAINTENANCE

•Avoid harsh, abrasive cleaners, and other corrosive chemicals.

•Do not use scouring pad for cleaning.

•Keep dry and avoid damp environments.

•Use a quality stainless steel cleaner and follow instructions that come with the

cleaner. WipeALONG the grain (NOT against).

•Wood top can be cleaned with damp cloth and wiped dry immediately with dry cloth.

If needed, solvent-based wood furniture cleaner can be used.

•Clean up any spills immediately to prevent stains from forming on the wood top.

Thank you for purchasing a TRINITY 56in Stainless Steel Workbench. In order to register your

product and receive streamlined customer service, please fill out the following Product

Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration

Form online at www.trinityii.com or (3) scan and email the form to

customerservice@trinityii.com. Include a copy of your original receipt with your submission.

First Name: Last Name:

Address:

City: State: Zip Code:

Email Address: Phone:

Product Model #: Purchase Date: / /

Location of Purchase:

Please rate the importance of each feature (1=least important; 10=most important)

Quality Price Size/Capacity Appearance Other

How did you hear about our product?

Magazine Ad Catalog Salesperson Word of Mouth

Internet Store Display Other

Marital Status: Single Married

Household Income: Below $50,000 $50,000-$150,000 $150,000+

Education: High School College Graduate School

Primary Residence: Own Rent

Comments/Suggestions:

PRODUCT REGISTRATION

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Trinity Inneneinrichtung Handbücher

Trinity

Trinity ECOSTORAGE TBFZ-0909 Bedienungsanleitung

Trinity

Trinity EcoStorage CTHA-3327 Bedienungsanleitung

Trinity

Trinity CTHA-0309 Bedienungsanleitung

Trinity

Trinity CTLS-0201C Bedienungsanleitung

Trinity

Trinity CTBFPRA-2408 Bedienungsanleitung

Trinity

Trinity CTSC-4802 Bedienungsanleitung

Trinity

Trinity TBFPRA-3611 Bedienungsanleitung

Trinity

Trinity TWE-1101 Bedienungsanleitung

Trinity

Trinity TSKLWH-3403 Bedienungsanleitung

Trinity

Trinity TBFLWH-1402 Bedienungsanleitung

Trinity

Trinity Pro TBFZ-0927 Bedienungsanleitung

Trinity

Trinity TBFPGR-2408 Bedienungsanleitung

Trinity

Trinity TWE-11012 Bedienungsanleitung

Trinity

Trinity TBFC-0907 Bedienungsanleitung

Trinity

Trinity TLSLNA-7298 Bedienungsanleitung

Trinity

Trinity 3-TIER BAMBOO SHELVING Bedienungsanleitung

Trinity

Trinity TBFZ-0932 Bedienungsanleitung

Trinity

Trinity ECOSTORAGE TBFZ-0956 Bedienungsanleitung

Trinity

Trinity ECOSTORAGE THBBR-3103 Bedienungsanleitung

Trinity

Trinity EcoStorage TBFZ-1401 Bedienungsanleitung

Trinity

Trinity TBFC-2206 Bedienungsanleitung

Trinity

Trinity ECOSTORAGE Bedienungsanleitung

Trinity

Trinity TLS-0201C Bedienungsanleitung

Trinity

Trinity TBF-1601 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung