Triplett 9065 Bedienungsanleitung

Model 9065

True RMS Data Logging MultiMeter

Instruction Manual

84-910

12/15

Contents

I. Introduction----------------------------------------------------------1

II.Included Items------------------------------------------------------1

Ill. Rules for Safe Operation---------------------------------------2

IV. Electrical Symbols-----------------------------------------------3

V. Meter Structure----------------------------------------------------4

VI. LCD Display-------------------------------------------------------5

VII. Keys, Rotary Switch and Input Terminals-----------------6

VIII. Technical lndex--------------------------------------------------8

1. General Specications---------------------------------------8

2. Electrical Specications-------------------------------------9

IX. Measurement Operation--------------------------------------17

1. Meter Power Control----------------------------------------17

2. Meter Settings------------------------------------------------18

3. AC Voltage----------------------------------------------------20

4. DC Voltage----------------------------------------------------20

5. AC and DC Current-----------------------------------------21

6. Resistance----------------------------------------------------22

7. Conductance-------------------------------------------------24

8. Capacitance--------------------------------------------------24

9. Continuity------------------------------------------------------25

10. Diode Test----------------------------------------------------25

11. Frequency/Duty Cycle Measurement/Pulse Width-27

12. Temperature------------------------------------------------27

13. LPF-----------------------------------------------------------28

14. dBV-----------------------------------------------------------29

15. dBm----------------------------------------------------------29

16. Maximum Value and Minimum Value----------------29

17. Relative Value Mode-------------------------------------30

18. Peak Detection Mode------------------------------------30

19. Compare Mode--------------------------------------------30

20. Recording Measurement Data------------------------31

21. Communication-------------------------------------------33

X. Maintenance and Repair-------------------------------------34

1. General Maintenance and Repair---------------------34

2. Testing Fuses-----------------------------------------------34

3. Replacing Fuses-------------------------------------------35

4. Battery Charge---------------------------------------------35

X. Warranty-----------------------------------------------------------36

X. Notes---------------------------------------------------------------37

I. Introduction

The Model 9065 is a 60000 count, or 4 5/6 digit,

handheld auto-ranging true RMS Digital Multimeter

(hereinafter referred to as “the meter’’). The meter can be

used to accurately measure AC and DC voltage, AC and

DC current, resistance, conductance, capacitance, tem-

perature, frequency and pulse width. It can also perform

diode testing, continuity testing, and it provides useful test

functions such as data hold, maximum/minimum/average

measurements, comparison measurement, relative mea-

surement, peak detection, trend capture and data record/

readback of as many as 20,000 measurements.

This Operating Manual provides information on safe and

recommended uses of this product. Please read the rel-

evant information carefully and observe all the Warnings

and Notes.

Warning:

Please read the “Rules for Safe Operation” before using

the meter.

II. Included Items

Open the package and the carrying case and inspect the

contents. Please check that all of the following items are

included:

1. One operating manual

2. A pair of test leads

3. Two K type temperature probes

4. One temperature connector

5. One charging adapter

6. One charging connector

7. One USB cable

8. One CD

9. One cloth bag

If you discover any missing or damaged pieces, please

contact Triplett at 1-800 Triplett or [email protected].

III. Rules for Safe Operation

Please note the Warning symbol. Warnings indicate

the conditions and actions which pose hazards to users or

may damage the meter or equipment under test.

This Meter is designed to comply with several

safety standards, This meter conforms to UL STD. 61010-1,

61010-2-030, 61010-2-032, 61010-2-033, Certied to CSA

SID. C22.2 NO. 61010-1,61010-2-030, IEC STD 61010-

2-032, 61010-2-033 in pollution degree 2, measurement

category (CAT III 1000V, CAT IV 600V), double insulation

as well as with IP65 standards for water resistance and

dustproong. Use of the meter without following the oper-

ating instructions can reduce or circumvent the protection

provided by the meter.

Measurement Category Ill (CAT Ill) is intended for

measurements performed in building installation. Examples

may include measurements on distribution boards, circuit-

breakers, wiring, including cables, bus-bars, junction boxes,

switches, socket-outlets in xed installations, and equipment

for industrial use and some other equipment, for example,

stationary motors with permanent connection to the xed

installation.

Measurement Category IV (CAT IV) is intended for

measurements performed at the source of the low-voltage

installation. Examples include electricity meters and mea-

surements on primary overcurrent protection devices and

ripple control units.

1. Never use a damaged meter. Before using the meter,

check the meter case for visible cracks or any missing plastic

parts. Pay special attention to the insulation areas around the

connectors.

2. Before using the meter, ensure the battery cover is closed

and secured. Before opening the battery cover, remove the

test leads from the meter.

3. Inspect the test leads for damaged insulation or exposed

metal. Check the test leads for continuity. If any test lead is

damaged, replace it before using the meter.

4. Do not apply more than the rated voltage, as marked on

the meter, between the terminals or between any terminal

and ground.

5. Do not have the meter turned on when removing the cover

or opening the case.

6. When working with a voltage >30V AC (RMS), >42VAC

(peak), or over 60V DC, special care should be taken to avoid

electric shock.

7. Replacement fuses must comply with the specications in

this Operating Manual.

8. Use the proper terminals, function and range for your mea-

surement.

9. When measuring current, shut off the power to the circuit,

then connect the meter to the circuit. Remember: the meter

and the circuit must be connected in series.

10. When making electrical connections, connect the com-

mon test lead before connecting the main test lead; when

disconnecting, disconnect the main test lead before discon-

necting the common test lead.

11. If the meter works improperly, do not use it. The protection

measures of the meter may have failed. If in doubt, contact

your distributor or Triplett Customer Service.

12. Do not store or use the meter in an environment with high

temperature, humidity, strong magnetic elds, or with inam-

mable or explosive materials.

13. When using the probes, keep your ngers behind the

nger guards.

14. Do not use the low-pass lter to verify hazardous voltage,

as there may be an AC voltage over the indicated value. First,

measure the voltage without a lter to check whether it is

hazardous, then select low-pass ltering.

15. Before testing resistance, continuity, conductance, diode

or capacitance, shut off the power to the circuit and discharge

all high-voltage capacitors.

17. Do not measure a voltage or current higher than the

allowed input values. When the range of measured values

cannot be determined, set the functional range switch at the

maximum-range position.

18. When the symbol shows on the LCD display, the

battery should be promptly charged to ensure measurement

accuracy.

19. Do not change the wiring within the meter to avoid injury

and damaging the meter.

20. A soft cloth and mild detergent should be used to clean

the surface of the meter when servicing. No abrasive clean-

ers or solvents should be used on the product.

21.Test a known voltage before use to conrm the meter is

functioning correctly.

22. If you want to replace the test lead, you need to replace

it with a test lead of the same or higher grade of CAT Ill

1000V/CAT IV 600V.

Dangerous Voltage

When the meter detects voltage ≥ 30V or overload (OL),

the symbol will display as a warning for potential hazard-

ous voltage.

Double Insulated

Grounding

Warning

AC (Alternating Current)

DC (Direct Current)

Continuity Buzzer

Diode

Capacitance

AC or DC (Alternating Current or Direct Current)

Danger High Voltage

Conforms to Standards of European Union.

This symbol signies the product complies with both

USA and Canadian electrical requirements.

IV. Electrical Symbols

V. Meter Structure (see Figure 1)

1Case

2LCD

3Function Keys

4Rotary Switch

5Input Terminals

V. LCD Display (see Figure 2) No. Function Description

1Label of Function

Keys

Indicates auxiliary functions under current

measuring interface

2Simulation Bar Analog display of input signals

3Minus Sign Indicates negative reading

4Lightning Symbol Danger- High Voltage

5Time and Date Indicates the time and date set in internal

clock

6Small

Measurements

Real-time input values are displayed when

the primary and secondary displays are

covered by menus or pop-up messages.

7Communications Indicates the USB communication is

enabled.

8Sound Setting Indicates the button sound is enabled

(beeps when a button is pressed)

9Battery Level Indicates the charge level of rechargeable

battery

10 Range Indicator Indicates the current range and range

mode for the meter (auto or manual)

11 Unit Indicates the measurement unit

12 Assisted Function

Mode

Indicates the active assisted measuring

function, such as Low Pass Filter

13 Assisted Function

Display

Shows additional measuring information

from the assisted function mode that is

active.

VII. Keys, Rotary Switch and Input Terminals

(1) Keys

The 14 keys on the meter are used to activate the alternate functions of the rotary switch, browse menus or control the me-

ter power.

The keys shown in Figure 3 are described in the following table.

Key Function

Turn on or turn off the power to the meter

F1 F2 F3 F4 Select the sub-functions and modes indicated by the labels on the LCD screen.

Cursor keys are used to select menu items, scroll through text and input data

HOLD Keep the current reading held on the display

RANGE Switch the range mode of the meter to Manual mode, then switch between all the available ranges. Long

press the button to return to Automatic range mode.

MAX MIN Starts to record Minimum & Maximum values.

SELECT Press to select the alternate function. Long press to enter Help Menu.

Press the key to switch the backlight brightness. Long press it to turn off backlight.

Knob Function

Measurement of AC Voltage

Measurement of mV in AC and mV in AC+DC

Measurement of voltage in DC and AC+DC

Measurement of mV in DC and temperature

Measurement of resistance, continuity and specic conductance

Diode test and capacitance measurement

(2) Rotary Switch (see Figure 4)

Knob Function

Hz% mS-Pulse Measurement of frequency, duty cycle and pulse width

µA Measurement of A in AC, DC and AC+DC

mA Measurement of mA in AC, DC and AC+DC

AMeasurement of ampere in AC, DC and AC+DC

Battery is charging

Terminal Description

AMeasurement of frequency, duty cycle and pulse width

mA µA Measurement of A in AC, DC and AC+DC

COM Measurement of mA in AC, DC and AC+DC

VΩ °C Hz Measurement of ampere in AC, DC and AC+DC

(3) Input Terminals

In addition to the above, all four terminals are used for charging and temperature measurement through corresponding

adapters .”Lead Error!” will show on the display to warn if the probes are inserted improperly.

Figure 3 & 4

VIII. Technical Index

1. General Specications

The maximum voltage between any terminal and ground: 1000 V

The fuse protection of mA or µA input terminals: 0. 8A H 1000V Fuse Type 6X32mm

The fuse protection of the A input terminal: 10A H1000V Fuse Type 10X38mm

Max. display: 60000

Range: Auto/Manual

Polarity: Auto

Operating temperature: -20°~50°C Storage temperature: -30°C~60°C

Relative humidity: ≤80% (0°C~30°C), ≤75% (30°C~40°C), ≤45% (40°C~50°C)

Electromagnetic compatibility: In an RF E-eld of 1V/m: Overall accuracy= specied accuracy+ 5% of range. No specied ac-

curacy guarantee for RF E-eld strength > 1V/m.

Operating altitude: 0~2000m

Temperature coefcient: 0.1X (specied accuracy)/ °C (<18°C or >28°C) Internal battery: Lithium battery of 7.4V 2200mAh

Power adapter: Input of 100V~240V,50/60Hz 0.2A max, Output of DC10V 500mA(short-circuit protection for output). External

diameter of 5.5 mm and internal diameter of 2.5mm.

Low battery: The symbol shows on the LCD.

Dimension: About (225 X100 X 60) mm

Weight: About 608g (including battery)

Safety standards: IEC/EN61010-1, EN61010-2-030, EN 61010-2-033 in pollution degree 2, CAT III 1000V,CAT IV 600V IP65

standards for waterproof and dustrproof rating

Inhaltsverzeichnis

Andere Triplett Multimeter Handbücher

Triplett

Triplett MM200 Bedienungsanleitung

Triplett

Triplett 9007 Bedienungsanleitung

Triplett

Triplett MM525 Bedienungsanleitung

Triplett

Triplett 1201 Bedienungsanleitung

Triplett

Triplett MM650 Bedienungsanleitung

Triplett

Triplett 3303 Bedienungsanleitung

Triplett

Triplett MM300 Bedienungsanleitung

Triplett

Triplett 9055 Bedienungsanleitung

Triplett

Triplett MM350 Bedienungsanleitung

Triplett

Triplett 9007-A Bedienungsanleitung

Triplett

Triplett 2103 Bedienungsanleitung

Triplett

Triplett 9015-A Bedienungsanleitung

Triplett

Triplett 1101-B Bedienungsanleitung

Triplett

Triplett 1101-A Bedienungsanleitung

Triplett

Triplett MM650 Bedienungsanleitung

Triplett

Triplett 1101-NIST Bedienungsanleitung

Triplett

Triplett 1101-B Bedienungsanleitung

Triplett

Triplett MM200-NIST Bedienungsanleitung

Triplett

Triplett 630 Type 5 Bedienungsanleitung

Triplett

Triplett 310-TEL 4 Bedienungsanleitung

Triplett

Triplett 60 Bedienungsanleitung

Triplett

Triplett 9005-A Bedienungsanleitung

Triplett

Triplett 1301 Bedienungsanleitung

Triplett

Triplett CM24 Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung