Tripp Lite U344-001-HDMI-R Bedienungsanleitung

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

Owner’s Manual

USB 3.0 to DVI Adapter

Model #: U344-001-R

USB 3.0 to HDMI Adapter

Model #: U344-001-HDMI-R

All trademarks are the property of their respective owners.

PROTECT YOUR INVESTMENT!

ultimate peace of mind. You could also win an

ISOBAR6ULTRA surge protector—a $50 value!

www.tripplite.com/warranty

14-08-104-9333A6-revB.indd 1 8/13/2014 11:04:00 AM

1. Introduction 3

1.1 Features 3

1.2 Package Contents 3

1.3 System Requirements 4

2. Installation 5

3. Using the Adapter 7

3.1 Display Properties 7

3.2 Extending Video to the Add-On Display 9

3.3 Mirroring Video on the Add-On Display 10

3.4 Making the Add-On Display the 11

Primary Display

4. Troubleshooting 12

5. Speciﬁcations 15

6. Warranty and Product Registration 16

Table of Contents

14-08-104-9333A6-revB.indd 2 8/13/2014 11:04:00 AM

1. Introduction

1.1 Features

• Adds an additional monitor, LCD or projector through a single

USB 3.0 port

• USB 3.0 is 10 times faster than USB 2.0, with transfer rates

up to 5 Gbps

• Backward compatible with USB 2.0

• Simultaneously connect up to 6 display adapters on a

Windows®PC

• Automatically resumes from hibernation and suspend modes

• Supports video resolutions up to 2048 x 1152 @ 60Hz

• Video streaming is supported up to 1080p

• Set additional monitors to extend the primary display,

duplicate the primary display, or set an additional monitor as

the primary display

• U344-001-R comes with a DVI to VGA adapter, allowing you

to connect either a DVI or VGA display

1.2 Package Contents

Before installation, please check the items in the

package. The package should contain the following items:

• (1) U344-001-R or (1) U344-001-HDMI-R

• (1) Driver CD

• (1) USB 3.0 Cable (U344-001-R only; cable is attached to

U344-001-HDMI-R)

• (1) Owner's Manual

• (1) DVI to VGA Adapter (U344-001-R only)

14-08-104-9333A6-revB.indd 3 8/13/2014 11:04:00 AM

1. Introduction

1.3 System Requirements

• Windows XP (32-bit), Vista (32- and 64-bit), 7 (32- and

64-bit), 8 (32- and 64-bit) and 8.1 (32- and 64-bit)

• USB 2.0 or 3.0 port; USB 3.0 port required for USB 3.0

speeds

• VGA, DVI or HDMI monitor

Minimum computer requirements when using

1 – 2 display adapters:

• 1.2GHz Single Core CPU

• 512MB of RAM

Minimum computer requirements when using

3 display adapters:

• 1.6GHz Single Core CPU

• 1GB of RAM

Minimum computer requirements when using

4 – 6 display adapters:

• 1.8GHz Core Duo CPU

• 1GB of RAM

Note: Only 1 added monitor can support DVD playback.

In order to support DVD playback, your computer must

meet the following minimum requirements:

• 2.0GHz Core Duo CPU

• 1GB of RAM

• Adapter screen resolution must be set to 800 x 600

with 32-bit color

14-08-104-9333A6-revB.indd 4 8/13/2014 11:04:00 AM

Note: Install the driver on your computer before connecting

the display adapter(s).

1. Insert the driver CD into your computer’s CD-ROM drive.

The setup program should run automatically. If the setup

program fails to start on its own, open the CD and double-

click on the appropriate driver ﬁle.

Note:

• If you encounter a User Account Control popup,

choose to allow the installation to proceed. This

may require an administrator’s password. If you

encounter a driver signature dialog box, choose to

continue the installation.

• If a message stating “Display Link software for USB

display adapter is already up to date,” then the

necessary software for this unit is already installed,

and you can proceed to step 5.

2. Follow the prompts that appear to complete the process.

3. When this process is complete, you will need to restart your

computer to ﬁnish the installation.

4. After restarting your computer, connect the included USB

cable from an available USB 2.0 or 3.0 port to the display

adapter.

5. Connect your display adapter to a monitor using an HDMI,

DVI or VGA cable, depending on your adapter/monitor

connection type.

2. Installation

14-08-104-9333A6-revB.indd 5 8/13/2014 11:04:00 AM

2. Installation

6. Once connected, the computer will recognize the display

adapter, and complete the installation. The video should

now be displayed on the add-on monitor. Note: It may

take a few moments before the screen appears on

the add-on monitor. Also, it is normal for the screen to

ﬂicker on and off a few times when ﬁrst connected. If

the add-on monitor remains blank, you may need to

restart your computer one more time.

Using Multiple Display Adapters

When using multiple display adapters, it is only necessary

to install the driver software once. After connecting the ﬁrst

display adapter to the computer, simply move on to connecting

the next display adapter.

Note: When using Windows Vista XDDM mode, only

one display adapter will be able to be conﬁgured

to use Extended mode, and the remaining display

adapters will be forced to use Mirror mode. Windows

Vista XDDM mode is a video card driver mode that

provides a Windows XP interface on a Vista computer.

14-08-104-9333A6-revB.indd 6 8/13/2014 11:04:00 AM

3. Using the Adapter

3.1 Display Properties

Once installed, the computer video can be Extended from the

primary display to the add-on display, Mirrored to display the

same thing on both, or changed to use the add-on display as

the primary display. This can be done by opening the Display

Settings page on your computer (see below) and changing the

settings.

To access the display settings, right-click on your computer’s

desktop, and select the Properties or Personalize option,

depending on your Windows operating system. From there

you will need to access the Settings or Display option to get

to the Display Settings page. A quick way to access this page

is to use the display adapter icon in the lower-right corner of

your computer screen. Right-click on this icon and select the

DisplayLink Manager or Video Setup option to automatically

pull up your computer’s Display Settings page.

On page 8 are additional settings that are available via the

display adapter right-click menu. Note: The settings available

in this right-click menu may vary depending on your operating

system.

14-08-104-9333A6-revB.indd 7 8/13/2014 11:04:00 AM

3. Using the Adapter

Option Description

DisplayLink

Manager

Opens an “About” screen that shows the DisplayLink driver

version installed on your computer.

Check for

Updates

Connects to the internet and checks for newer versions of

the DisplayLink software, and downloads them if available.

USB 3.0

Adapter

Depending on the connected adapter, this will display

as either USB 3.0 to HDMI or DVI, and provides a list

of settings when selected. When multiple adapters are

connected, a separate menu option will be available for

each one.

• Screen Resolution – Click this option to bring up a list

of available screen resolutions for the add-on monitor.

Select the desired resolution from this list.

• Screen Rotation – This setting allows you to rotate the

screen according to your desired orientation.

• Extend To – This setting allows you to select which

direction to extend the add-on monitor to; Right, Left,

Up, Down.

• Set as Main Monitor – This setting allows you to make

the add-on monitor the primary display.

• Notebook Monitor Off – This setting appears on laptop

computers only, and allows you to turn off the laptop

monitor, leaving only the add-on monitor displayed.

• Mirror – This setting allows you to mirror the video of

the primary display to your add-on monitor, so that the

same thing is displayed on both screens.

• Off – This setting turns off the add-on monitor.

• Optimize for Video – When playing video content on

an add-on monitor, this setting can help to improve

playback performance. Note: Text may appear less clear

when this is enabled.

• Fit to TV – When using your display adapter to connect

a TV to your computer, the desktop may not always

completely appear on the screen. This setting can be

used to adjust the picture to display properly.

Audio Setup Opens your computer's sound settings screen.

Note: This function only works in speciﬁc models.

Video Setup Opens your computer’s display settings screen.

14-08-104-9333A6-revB.indd 8 8/13/2014 11:04:01 AM

In addition to the display adapter right-click menu, Windows

Vista and 7 users can press the [Windows Key] and the [P]

key at the same time to pull up the menu below, which quickly

allows you to switch the display settings.

Note: Only Mirror mode is supported under Windows Vista

Display Driver Model (WDDM) mode. In addition, the

Aero Experience (Flip 3D effect) will be disabled under

Windows Vista Display Driver Model (WDDM) mode as

long as the display adapter is connected.

3.2 Extending Video to the Add-On Display

To extend the video of the primary monitor to the add-on

monitor, follow the steps below:

1. Open your computer’s Display Settings page.

2. Select the monitor icon that represents the add-on display

you wish to change, or choose the add-on display from the

drop-down menu. The primary display is always icon 1.

3. Once you’ve selected the monitor icon for the add-on

display, check the checkbox to extend video onto the

monitor, or select the extension option from the drop-down

list.

4. Drag the monitor icons in the Display Settings page so that

they are positioned to replicate the location of the actual

displays. For example, if display 1 is directly to the left of

display 2, the monitor icons should be positioned that way.

This affects which side of the screen the mouse is allowed

to move to the next display from, and is therefore essential

to ensure smooth mouse movement between displays.

3. Using the Adapter

14-08-104-9333A6-revB.indd 9 8/13/2014 11:04:01 AM

5. Click the Apply button to activate the changes. The

computer video will now be extended from the primary

display to the add-on display.

Note: When playing a DVD, it is recommended that

you play the DVD on a monitor connected to the

computer via standard cabling, and not an add-on

monitor connected via display adapter. If you need

to play a DVD on an add-on monitor, you must have

a 2.0GHz Core Duo CPU with 1GB of RAM, and the

screen resolution must be set to 800 x 600 with 32-bit

color. If multiple display adapters are connected to a

computer, only 1 of them can play DVD content.

3. Using the Adapter

3.3 Mirroring Video on the Add-On Display

To show the same image on both the primary and add-on

displays, follow the steps below:

1. Open your computer’s Display Settings page.

2. Select the monitor icon that represents the add-on display

you wish to change, or choose the add-on display from the

drop-down menu. The primary display is always icon 1.

3. Un-check the box next to Extend the desktop onto this

monitor, or select the option from the drop-down menu to

duplicate the display, and then click the apply button.

Note: In Mirror mode, the add-on display settings are

limited by those of the primary display. If the primary

display only supports a resolution of 1280 x 1024, the

add-on monitor will be limited to a resolution of

1280 x 1024 or less.

14-08-104-9333A6-revB.indd 10 8/13/2014 11:04:01 AM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tripp Lite Adapter Handbücher

Tripp Lite

Tripp Lite U444-T6N-VUBC Bedienungsanleitung

Tripp Lite

Tripp Lite p108-000-r Bedienungsanleitung

Tripp Lite

Tripp Lite P116-000-HDSC1 Bedienungsanleitung

Tripp Lite

Tripp Lite U444-CAT-H Bedienungsanleitung

Tripp Lite

Tripp Lite UAC-1B Bedienungsanleitung

Tripp Lite

Tripp Lite U444-06N-HD8KW Bedienungsanleitung

Tripp Lite

Tripp Lite U444-06N-V-C Bedienungsanleitung

Tripp Lite

Tripp Lite 8TLB032VU1 Bedienungsanleitung

Tripp Lite

Tripp Lite U444-2DP-MST4K6 Bedienungsanleitung

Tripp Lite

Tripp Lite U444-3DP-MST Bedienungsanleitung

Tripp Lite

Tripp Lite U436-000-GB Bedienungsanleitung

Tripp Lite

Tripp Lite N254-024-6A Bedienungsanleitung

Tripp Lite

Tripp Lite High-Speed USB Serial Adapter USA-19HS Bedienungsanleitung

Tripp Lite

Tripp Lite U209-005-COM Bedienungsanleitung

Tripp Lite

Tripp Lite P112-000 Bedienungsanleitung

Tripp Lite

Tripp Lite P116-000-HDMI Bedienungsanleitung

Tripp Lite

Tripp Lite U436-06N-GBW-RA Bedienungsanleitung

Tripp Lite

Tripp Lite Keyspan USA-49WG Bedienungsanleitung

Tripp Lite

Tripp Lite U444-06N-VGA-AM Bedienungsanleitung

Tripp Lite

Tripp Lite U344-001-DP Bedienungsanleitung

Tripp Lite

Tripp Lite P134-06N-DVI-DL Bedienungsanleitung

Tripp Lite

Tripp Lite U336-000-GB-AL Bedienungsanleitung

Tripp Lite

Tripp Lite U444-06N-VGA-RA Bedienungsanleitung

Tripp Lite

Tripp Lite U444-06N-2H-MST Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung