Tripp Lite B126-1A1-WHD3 Bedienungsanleitung

Owner’s Manual

Wireless HDMI

Extender Kit

Model: B126-1A1-WHD3

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

Español 8 • Français 15 • Русский 22

18-07-338-933894.indb 1 9/10/2018 11:29:11 AM

Package Contents

Optional Accessories

System Requirements

Product Features

• Transmitter and Receiver Units

• IR-IN (Rx) Cable

• IR-OUT (Tx) Cable

•

(x2) External Power Supplies (Input: 100-240V, 50/60 Hz, 0.4A; Output: 5V 2A)

• (x4) Antennas

• Mounting Hardware

• Owner’s Manual

*Includes NEMA 1-15P (North America), CEE 7/16 Schuko (Europe), BS 1363 (UK) and

AS/NZS 3112 (Australia) plugs

• P568-Series High-Speed HDMI Cables

• HDMI source device, such as a Blu-ray™ player

• HDMI display device, such as a television or projector

• Wirelessly extend a 1080p (60 Hz) signal up to 165 ft. / 50 m

• IR control functionality lets you control your HDMI source device remotely

• All-in-one wireless solution—no cabling infrastructure needed

• Transmits high-deﬁnition video and stereo audio

• AES 128 encryption ensures your transmission is protected

• Uses a 5 GHz wireless frequency for faster data transmission and reduced

interference from other wireless sources

• HDMI 1.3 and HDCP 1.2 compatible

• Supports up to 24-bit Deep Color (8 bits per channel)

• Supports 300 MHz / 3.4 Gbps per channel bandwidth (10.2 Gbps total)

• Plug-and-play functionality:

o No software or drivers required

o Supports point-to-point connection

• External power supplies include North American, UK, European and Australian

plug adapters

18-07-338-933894.indb 2 9/10/2018 11:29:11 AM

Indicators and Connections

HDMI TX Back Panel

HDMI RX Back Panel

APower Input: Connect included power supply adapter for power

BHDMI Input: Connect to HDMI source with HDMI cable

CHDMI Output: Connect to HDMI display with HDMI cable

DSignal Indicator LED: Green LED remains solid to indicate HDMI signal

EWireless Indicator LED: LED will illuminate green when HDMI signal is

obtained; will blink when data is transmitting

FData Transmission LED: Green LED will blink slowly when connection

is building and will blink quickly when it is successfully connected and

transmitting data

GIR-IN (Rx) Port: Connect included IR-IN (Rx) cable

Note: Be sure the source remote control is within the required range of IR receiver

HIR-OUT (Tx) Port: Connect included IR-OUT (Tx) cable

Note: IR Blaster cable should be placed close to source device for best results

18-07-338-933894.indb 3 9/10/2018 11:29:11 AM

Installation

Notes:

1. Ensure all equipment being connected is powered off prior to installation.

2. For best results, position the IR transmitter near the HDMI source and IR receiver

near the display.

3. If the wireless signal is obstructed by walls (especially brick or glass) or other sources

of interference, the quality and distance of the signal will likely be reduced.

Blu-ray™/DVD

HDMI Extender

Tx Transmitter

HDMI Extender

Rx Receiver

TV (Up to 1080p)

HDMI Cable

1. Optional: Attach the included mounting hardware to the transmitter and

receiver units, then mount them to a desired location.

2. Connect the HDMI source device to the HDMI Input port on the transmitter

unit using an HDMI cable, such as Tripp Lite’s P568-Series High-Speed

HDMI Cables.

3. Connect the IR-OUT (Tx) cable to the IR-OUT port on the transmitter unit.

Note: IR-OUT (Tx) cable has IR-OUT marked on the bottom of the IR bulb. Place the

bulb of the IR-OUT (Tx) cable in an area with a direct line of sight to the HDMI source

device (e.g. Blu-ray player).

4. Connect the external power supply to the transmitter unit, and plug it into

a Tripp Lite Surge Protector, Uninterruptible Power Supply (UPS) or Power

Distribution Unit (PDU).

5. Connect the HDMI display to the HDMI Output port on the receiver unit using

a P568-Series High-Speed HDMI Cable.

6. Connect the IR-IN (Rx) extension cable to the IR-IN port on the receiver unit.

Note: IR Receiver cable has IR-IN marked on the bottom of the IR bulb. Place the

bulb of the IR receiver cable in the general area you will be using the source device’s

remote control.

7. Connect the external power supply to the receiver unit, and plug it into a

Tripp Lite Surge Protector, Uninterruptible Power Supply (UPS) or Power

Distribution Unit (PDU).

8. Turn on power to the connected equipment.

18-07-338-933894.indb 4 9/10/2018 11:29:12 AM

Troubleshooting

If you are unable to get an acceptable image after following the installation

instructions, try the troubleshooting tips below.

1. Are the external power supplies included with the product connected

and plugged into a working power source? For the product to function

properly, the transmitter and receiver must be connected to and receiving

power from an external power supply.

2. Was the power to the HDMI source turned off prior to installation? If

not, restart.

3. What resolution are you trying to reach? See the Product Features and

Installation sections in this manual for details on maximum distance and

resolution. If you are not able to get an acceptable image, try lowering your

computer’s video resolution or adjusting the refresh rate.

4. Does your HDMI display show a message saying “Waiting for

Connection”? If so, please check to make sure the power supply adapters

are properly connected and the power indicator LEDs are illuminated solid

blue.

5. Does your HDMI display show a message saying “Please Check the TX

Input Signal”? Ensure the HDMI signal connection LED on the transmitter

unit is illuminated solid green. If the LED is not illuminating solid, connect

the source device directly to the display device to see if the issue is with the

source, display or HDMI cable you are using.

6. Are your transmitter and receiver units not connecting to each other?

If the wireless connection LEDs are not blinking correctly, restart either the

transmitter or receiver unit, then reconnect the HDMI connector or cable.

Also, make sure the transmitter and receiver units have a direct line of sight

to each other. If the line of sight between the units is blocked by windows or

walls, or there is no direct line of sight, the Transmitter and Receiver units

will not be able to establish a connection.

7. Is the Wi-Fi indicator on the transmitter unit on and there is no output

signal on the display? Ensure the HDMI signal connection LED on the

receiver unit is illuminated solid green. If the LED is not illuminating solid,

connect the source device directly to the display device to see if the issue is

with the source, display or HDMI cable you are using.

8. Is the HDMI display transmitting a choppy picture? If so, ensure the

position of the transmitter and receiver units are in the required range, then

restart the transmitter or receiver. If this does not work, check for other

signal disturbances in between the transmitter and receiver.

9. Test your cables to ensure they are working properly.

10. Are the transmitter and/or receiver units located in an area that

exposes them to elevated temperatures? If the product is overheating,

it will not function properly.

18-07-338-933894.indb 5 9/10/2018 11:29:12 AM

Speciﬁcations

Warranty and Product Registration

Input Port HDMI (Female), 3.5 mm (Female)

Output Port HDMI (Female), 3.5 mm (Female)

IR Frequency 20-60 Hz Wide Range

Transmission Distance 165 ft. / 50 m

Maximum Transfer Rate 10.2 Gbps

Transmission Method 5 GHz Wireless Transmission

External Power 5V 2A

Power Consumption TX: 7W; RX: 5W

HDMI Version 1.3

HDCP Version 1.2

Max Video Resolutions 1920 x 1080 / 1080p @ 60 Hz

MTBF >30.000 hours

Operating Temperature 32 to 122 °F / 0 to 50 °C

Storage Temperature 14 to 158 °F / -10 to 70 °C

Humidity 0 to 90% RH, Non-Condensing

TX & RX Unit Dimension (H x W x D) 0.36 x 0.25 x 0.07 in. /

110 x 75 x 22 mm

TX & RX Unit Weight 0.68 lb. / 310 g

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year

from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at

its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned

Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must

be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must

be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This

warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has

been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or

exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not liable for any costs, such as lost proﬁts or

revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims

by third parties, or otherwise.

18-07-338-933894.indb 6 9/10/2018 11:29:12 AM

Warranty and Product Registration

Product Registration

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a

drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modiﬁcations to this equipment not expressly approved by Tripp Lite could void the user’s authority

to operate this equipment.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when

customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis

(this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably be expected

to cause the failure of the life support equipment or to signiﬁcantly affect its safety or effectiveness is not

recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

18-07-338-933894.indb 7 9/10/2018 11:29:12 AM

Manual del Propietario

Juego Extensor

HDMI Inalámbrico

Modelo: B126-1A1-WHD3

1111 W. 35th Street, Chicago, IL 60609 EE UU • www.tripplite.com/support

English 1 • Français 15 • Русский 22

18-07-338-933894.indb 8 9/10/2018 11:29:12 AM

Contenido del Empaque

Accesorios Opcionales

Requisitos del Sistema

Características del Producto

• Unidades Transmisoras y Receptoras

• Cable IR-IN (Rx)

• Cable IR-OUT (Tx)

• Fuentes de alimentación externa (Entrada: 100V ~ 240V, 50Hz / 60Hz, 0.4A;

Salida: 5V 2A)*

• (x4) Antenas

• Accesorios de instalación

• Manual del Propietario

*Incluye clavijas NEMA 1-15P (Norteamérica), CEE 7/16 Schuko (Europa), BS 1363

(Reino Unido) y AS/NZS 3112 (Australia)

• Cables HDMI de Alta Velocidad de la Serie P568

• Dispositivo fuente HDMI, como un reproductor Blu-ray™

• Dispositivo de visualización HDMI, como un televisor o proyector

• Extiende en forma inalámbrica una señal 1080p (60 Hz) hasta a 50 m

[165 pies]

• La funcionalidad de control IR le permite controlar de forma remota su

dispositivo fuente HDMI

•

Solución inalámbrica todo en uno—sin necesidad de infraestructura de cableado

• Transmite audio estéreo y video de alta deﬁnición

• El encriptado AES 128 garantiza que su transmisión está protegida

• Utiliza una frecuencia inalámbrica de 5 GHz para transmisión más rápida de

datos y menor interferencia de otras fuentes inalámbricas

• Compatible con HDMI 1.3 y HDCP 1.2

• Soporta Color Verdadero de hasta 24 bits (8 bits por canal)

•

Soporta 300 MHz / 3.4 Gbps por ancho de banda de canal (10.2 Gbps en total)

• Funcionalidad de conectar y usar

o No se necesitan software o controladores

o Soporta conexión punto a punto

• Las fuentes de alimentación externas incluyen adaptadores de clavijas para

Norteamérica, Reino Unido, Europa y Australia

18-07-338-933894.indb 9 9/10/2018 11:29:12 AM

Indicadores y Conexiones

CD 5V, 2A ENTRADA

HDMI

IR-OUT [Salida IR]

CD 5V, 2A SALIDA

HDMI

IR-IN [Entrada IR]

CD 5V, 2A ENTRADA

HDMI

IR-OUT [Salida IR]

CD 5V, 2A SALIDA

HDMI

IR-IN [Entrada IR]

Panel Posterior de HDMI Tx

Panel Posterior de HDMI Rx

AEntrada de Alimentación: Conecte la fuente alimentación externa incluida

para alimentación.

BEntrada HDMI: Conecte a la fuente HDMI con un cable HDMI.

CSalida HDMI: Conecte a la pantalla HDMI con un cable HDMI.

DLED Indicador de Señal: El LED verde permanece encendido para indicar

la señal HDMI

ELED de Indicador Inalámbrico: El LED se iluminará en color verde cuando

se obtenga una señal HDMI y destellará cuando esté transmitiendo datos

FLED de Transmisión de Datos: El LED verde destellará lentamente

cuando se establece la conexión y destellará rápidamente cuando se está

correctamente conectada y transmitiendo datos

GPuerto IR-IN (Rx): Conecte el cable IR-IN (Rx) incluido.

Nota: Asegúrese de que el control de remoto de la fuente esté en el rango

requerido por el receptor IR

HPuerto IR-OUT (Tx): Conecte el cable IR-OUT (Tx) incluido.

Nota: Para obtener mejores resultados, el cable IR Blaster [Emisor de rayos

Infrarrojos] debe colocarse cerca del dispositivo fuente.

18-07-338-933894.indb 10 9/10/2018 11:29:13 AM

Inhaltsverzeichnis

Sprachen:

Andere Tripp Lite Extender Handbücher

Tripp Lite

Tripp Lite 0DT23008 Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1P0-MINI Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101 Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1-WP Bedienungsanleitung

Tripp Lite

Tripp Lite NPOE-EXT-1G30WP Bedienungsanleitung

Tripp Lite

Tripp Lite B127A-4X1-BH Bedienungsanleitung

Tripp Lite

Tripp Lite B125-150 Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1P1M-U-POC Bedienungsanleitung

Tripp Lite

Tripp Lite B125-101-60-WP Bedienungsanleitung

Tripp Lite

Tripp Lite B162-100-POE Bedienungsanleitung

Tripp Lite

Tripp Lite B164-101-WIR Bedienungsanleitung

Tripp Lite

Tripp Lite B150-1A1-DVI Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1-WHD4HH Bedienungsanleitung

Tripp Lite

Tripp Lite B121-000 Bedienungsanleitung

Tripp Lite

Tripp Lite B127A-1A1-FHFH Bedienungsanleitung

Tripp Lite

Tripp Lite B132-004 Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1-WHD1 Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101-2 Bedienungsanleitung

Tripp Lite

Tripp Lite HDMI B122-000-60 Bedienungsanleitung

Tripp Lite

Tripp Lite NPOE-EXT-1G30 Bedienungsanleitung

Tripp Lite

Tripp Lite B013-000 Bedienungsanleitung

Tripp Lite

Tripp Lite B127E-1A1-HH Bedienungsanleitung

Tripp Lite

Tripp Lite B132-004A Bedienungsanleitung

Tripp Lite

Tripp Lite B136-101-WP-1 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung