Tripp Lite B126-1A0-U Bedienungsanleitung

Owner’s Manual

HDMI over Cat5

Active Extender

Models: B126-1A1-U and B126-1A0-U

Español p. 11 Français p. 21 Русский p. 31

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an ISOBAR6ULTRA

surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

16-12-182-9334F6.indb 1 1/4/2017 4:40:04 PM

Product Features

Package Contents

• Extends a 1080p HDMI audio/video signal up to 125 ft. from the

source

• B126-1A0-U works with a B126-002* or B126-004* extender/splitter

transmitter unit

• Additional HDMI port allows for the connection of a local monitor

(B126-1A1-U only)

• 3D and HDCP compliant

• Receiver units feature a built-in equalization control to adjust video

image

• USB Micro-B ports supply power to the B126-1A1-U and B126-1A0-U;

no external power supplies required

• HDMI connector with latches provides a more secure connection

• Supports stereo audio

• Compatible with all operating systems

• No software or drivers required

*For details on the B126-002 and/or B126-004, reference the owner’s manual

included with the unit. The manual can also be found at www.tripplite.com/support.

• Transmitter* and Receiver units

• USB Micro-B Cable(s) – 3 ft.*

• Screwdriver for Equalization adjustment

• Owner’s Manual

*The B126-1A1-U comes with both Transmitter and Receiver units, as well as two

USB Micro-B cables. The B126-1A0-U comes with a Receiver unit and one USB

Micro-B cable.

16-12-182-9334F6.indb 2 1/4/2017 4:40:04 PM

Optional Accessories

System Requirements

• N202-Series Cat6 24 AWG Solid Wire Patch Cables

• P568-Series High Speed HDMI Cables

• UR05C-Series USB Micro-B Charge-Only Cables

• U280-002-W12 2-Port USB Wall Charger

• UAC-1B 1-Port USB Wall Charger

• Computer, Blu-ray™, or other source with an HDMI output port

• Display with an HDMI port

16-12-182-9334F6.indb 3 1/4/2017 4:40:04 PM

Extender Kit Installation

Notes:

1. Test to make sure the entire installation works properly before pulling cables

through ceilings/walls.

2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6

cable must be used. The use of stranded wire Cat5e/6 cable or cable with a

gauge size higher than 24 AWG will result in shorter extension distance. All

Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.

3. Make sure the power to all devices you are connecting is turned off prior to

installation.

24 AWG SOLID-WIRE

CAT5/6 CABLE

Blu-ray™

PLAYER HDMI DISPLAY

HDMI

DISPLAY

Up to 125 ft. at 1080p

1. Connect the built-in HDMI cable of the transmitter unit to the HDMI

source.

2. Optional: Connect an HDMI monitor to the LOCAL port on the

B126-1A1-U transmitter using a Tripp Lite P568-Series HDMI Cable.

3. Connect the included USB Micro-B Cable between the transmitter

unit and a USB port on the source or a USB wall outlet.

4. Connect the RJ45 port on the transmitter to the RJ45 port on the

receiver using Cat5e/6 cable.

Note: See the installation diagrams for maximum extension distance and video

resolutions.

5. Connect the built-in HDMI cable of the receiver unit to an HDMI

monitor input port.

6. Connect the included USB Micro-B cable between the receiver unit

and a USB port on the display or a USB wall outlet.

16-12-182-9334F6.indb 4 1/4/2017 4:40:05 PM

Extender Kit Installation

7. Turn on the power to the HDMI source and HDMI display. The green

RJ45 LEDs on the transmitter and receiver units will illuminate to

indicate they are receiving power. The orange RJ45 LEDs on the

transmitter and receiver units will illuminate to indicate they are

receiving a signal from the source.

8. If necessary, adjust the Equalization control on the receiver unit to

improve the video image.

Note: An improper Equalization setting can cause the monitor to display

no picture at all. Try each Equalization setting until an acceptable image is

displayed.

16-12-182-9334F6.indb 5 1/4/2017 4:40:05 PM

Extender/Splitter Installation

Notes:

1. Test to make sure the entire installation works properly before pulling cables

through ceilings/walls.

2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6

cable must be used. The use of stranded wire Cat5e/6 cable or cable with a

gauge size higher than 24 AWG will result in shorter extension distance. All

Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.

3. Make sure the power to all devices you are connecting is turned off prior to

installation.

4. The installation diagram shows the B126-004 local transmitter unit. The

B126-002 installation is the same, except there are only 2 remote ports and no

local monitor port.

B126-004

B126-1A0-U

Blu-ray™

PLAYER

OPTIONAL

LOCAL DISPLAY

Up to 125 ft. at 1080p (60Hz)

B126-1A0-U

16-12-182-9334F6.indb 6 1/4/2017 4:40:05 PM

Extender/Splitter Installation

1. Connect the HDMI source to the INPUT port on the B126-002 or

B126-004 using a Tripp Lite P568-Series HDMI Cable.

2. Optional for B126-004: Connect an HDMI monitor to the LOCAL

port on the B126-004 using a Tripp Lite P568-Series HDMI Cable.

3. Connect the external power supply to the transmitter unit and plug

it into a Tripp Lite Surge Protector, PDU or UPS. The green LED

illuminates to indicate the unit is receiving power from the external

power supply.

4. Using Cat5e/6 cable, connect one of the RJ45 output ports on the

transmitter unit to the RJ45 input port on the B126-1A0-U.

5. Connect the B126-1A0-U to a monitor using its built-in HDMI Cable.

6. Connect the included USB Micro-B cable to the port on the

B126-1A0-U and a USB port on the display or a USB wall outlet. The

green LED will illuminate, indicating the unit is receiving power from

the USB Micro-B port.

7. Repeat Steps 4-7 for each additional B126-1A0-U in the installation.

8. Turn on the power to the HDMI source and HDMI displays. The orange

RJ45 LEDs illuminate on both transmitter and receivers to indicate

the unit is receiving a signal from the source. The screen should now

be displayed on the connected monitors.

9. If necessary, use the Equalization control on the B126-1A0-U to

adjust the video image.

Note: An improper Equalization setting can cause the monitor to display

no picture at all. Try each Equalization setting until an acceptable picture is

displayed.

16-12-182-9334F6.indb 7 1/4/2017 4:40:05 PM

Troubleshooting

If you are unable to get an acceptable image after following the

installation instructions, try the troubleshooting tips below.

1. Is the USB Micro-B cable that came with the product connected

and plugged into a working power source? For the product to

function properly, the transmitter and receiver must be connected to

and receiving power from the USB Micro-B cable.

2. Was the power to the HDMI source turned off prior to

installation? If not, restart.

3. What resolution are you trying to reach? See the Product

Features and Installation sections in this manual for details

on maximum distance and resolution. The shorter the extension

distance, the higher the resolution you will be able to obtain. If you

are not able to get an acceptable image, try lowering your computer’s

video resolution or adjusting the refresh rate.

4. What type of cabling are you using? Inferior cabling can result in

poor performance, so it is important that you use cables that can

support the video resolution you are trying to obtain. To achieve

maximum distance and resolution, 24 AWG solid-wire UTP cable

(such as Tripp Lite’s N202-Series cables) must be used.

5. Test your cables to ensure they are working properly. For

example, connect your Cat5e/6 cable between a computer and a

network to verify that it establishes a network connection.

6. Do you have any patch panels or other devices in between

the transmitter and receiver units? Tripp Lite’s HDMI over Cat5

extender kits were designed to be connected directly from the

transmitter to the receiver via UTP cable. The more connection points

between the source and the remote monitor, the more likely signal

degradation will occur, causing poor performance. If you have a patch

panel or other device in between, it should be removed from the

installation.

16-12-182-9334F6.indb 8 1/4/2017 4:40:05 PM

Troubleshooting

7. Do you have a splitter, switch or other device in between the

computer and transmitter, or in between the receiver and

display? Tripp Lite’s HDMI over Cat5 extender kits were designed for

the transmitter to connect directly with the source computer, and for

the receiver to connect directly to the display. If you have a splitter,

switch, or other device in between, it should be removed from the

installation.

8. Check your cabling for any damage that may have occurred

during installation. If a cable connector is loosened from being

pulled through ceilings/walls, or the cable jacket is damaged, causing

the wiring to be exposed, you will not be able to achieve maximum

performance.

9. Are the transmitter and/or receiver units located in an area

that exposes them to elevated temperatures? If the product is

overheating, it will not function properly.

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period

of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is

limited to repairing or replacing (at its sole option) any such defective products. To obtain service

under this warranty, you must obtain a Returned Material Authorization (RMA) number from

TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to

TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must

be accompanied by a brief description of the problem encountered and proof of date and place

of purchase. This warranty does not apply to equipment, which has been damaged by accident,

negligence or misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid

limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS

PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not

liable for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment,

loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

16-12-182-9334F6.indb 9 1/4/2017 4:40:05 PM

Warranty and Product Registration

Product Registration

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be

automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modiﬁcations to this equipment not expressly approved by Tripp Lite could void the

user’s authority to operate this equipment.

WEEE Compliance Information for Tripp Lite Customers and Recyclers

(European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and

implementing regulations, when customers buy new electrical and electronic equipment

from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies

depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to signiﬁcantly affect its safety or

effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without

notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

16-12-182-9334F6.indb 10 1/4/2017 4:40:05 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Tripp Lite Extender Handbücher

Tripp Lite

Tripp Lite HDMI B122-000 Bedienungsanleitung

Tripp Lite

Tripp Lite B203-104-PNP Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1-IR Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1-WHD4HH Bedienungsanleitung

Tripp Lite

Tripp Lite B127U-002-PDPH2 Bedienungsanleitung

Tripp Lite

Tripp Lite B150-1A1-DVI Bedienungsanleitung

Tripp Lite

Tripp Lite B125-150 Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101A Bedienungsanleitung

Tripp Lite

Tripp Lite B136-101 Bedienungsanleitung

Tripp Lite

Tripp Lite B127A-4X1-BH Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101-2: B130-101A-2 Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101A-MR Bedienungsanleitung

Tripp Lite

Tripp Lite B162-001-POE Bedienungsanleitung

Tripp Lite

Tripp Lite B132-100-WP Bedienungsanleitung

Tripp Lite

Tripp Lite B127M-101-H Bedienungsanleitung

Tripp Lite

Tripp Lite P130-000-AUDIO2 Bedienungsanleitung

Tripp Lite

Tripp Lite B150-1A1-HDMI Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1P0-MINI Bedienungsanleitung

Tripp Lite

Tripp Lite B126-2P2M-POC Bedienungsanleitung

Tripp Lite

Tripp Lite U224-1R4-R Bedienungsanleitung

Tripp Lite

Tripp Lite P167-000 Bedienungsanleitung

Tripp Lite

Tripp Lite B140-101X-U Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1SR Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1SR Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung