Tripp Lite B127E-1A1-HH Bedienungsanleitung

Owner’s Manual

HDMI Over Cat6 Extender Kit,

4K/60 Hz

Model: B127E-1A1-HH

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

tripplite.com/warranty

Este manual esta disponible en español en la página de

Tripp Lite : tripplite.com/support

Ce manuel est disponible en français sur le site Web de

Tripp Lite : tripplite.com/support

Русскоязычная версия настоящего руководства представлена на

веб-сайте компании Tripp Lite по адресу: tripplite.com/support

IR-IN IR-OUT RS232 RESET

POWER

LINK

GND

IR-IN IR-OUT RS232 RESET

POWER

LINK

GND

Package Contents

• Transmitter and Receiver Units

• External Power Supply Plug Adapters: AS/NZS 3112 Australia;

BS 1363 U.K.; CEE 7/16 Schuko; NEMA 1-15P North America

• IR-Out Cable

• IR-In Cable

• (x2) RS-232 Adapters

• Mounting Hardware

• Owner’s Manual

Optional Accessories:

• N202-Series Cat6 24 AWG Solid-Wire Patch Cables

• P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables

Product Features

• Extends a 4K (3840 x 2160) @ 60 Hz 4:4:4 signal up to 328 ft.

(100 m) from the source

• Power over Cable (PoC) technology provides power to the receiver via

Cat6 cable

• Additional HDMI port on the transmitter unit features multi-resolution

support and allows the connection of a local monitor.

• Remote receiver unit features built-in equalization (EQ) control and

auto EDID image adjustment

•

Includes mounting hardware that allows both the local transmitter and

remote receiver units to be wall-mounted, rack-mounted or pole-mounted

• Supports up to 7.1-channel surround sound audio

• HDMI 2.0 and HDCP 2.2 compatible

• Plug and play—no software or drivers required

Disclaimer

Before installation, please check the following settings of your source(s)

and TV/monitor(s):

1. Set to display 60 Hz. Double-check factory settings, as default can

be set to a lower frequency (Hz) than advertised.

2. Ensure the input setting of your monitor is set at HDMI 2.0. Some

displays may have default setting at HDMI 1.4.

3. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/

monitor. Conﬁrm with your TV/monitor manufacturer which HDMI ports

support UHD Deep Color.

Note: If you wish to connect a local monitor to your installation, depending

on your TV/monitor make/model, the UHD Deep Color setting may need to be

disabled on your local TV/monitor to achieve 4K 60 Hz resolution.

Mounting Instructions (select models only)

19" Rack-mount Pole-mount

The B127E-1A1-HH includes mounting hardware that allows for a variety

of mounting methods. The following images illustrate how the included

mounting brackets can be attached for different installations.

Note: The model shown in the below images is for illustrative purposes only. Your

product may vary by model number, size or port orientation. The mounting options

for all over IP units are the same.

Wall-mount

Standard Extender Kit Installation

Notes:

1) Test to ensure the entire installation works properly before pulling cables through

ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6

cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher

than 24 AWG, will result in shorter extension distance. Higher gauge cabling,

such as 26 AWG, has a more limited transmission capability than lower gauge

cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire

cabling.

3) The installation diagram shows a B127E-1A1-HH unit.

4) External power is not required for remote receiver units due to Power-over-Cable

(PoC) technology incorporated in the transmitter units.

B127E-1A1-HH

Extender Kit

MONITOR

PC WITH

USB

CONTROL

PC WITH

RS-232

CONTROL

IR SENSOR

Up to 328 ft. (100 m) at 4K/60 Hz

IR SENSOR

IR Control

Pad

IR Control

Pad

USB

MOUSE

RS-232 SCANNER/

OPTIONAL

USB

KEYBOARD

HDR PLAYER

LOCAL

TRANSMITTER

REMOTE

RECEIVER

Up to 328 ft. (100 m) Cat6 cable at 4K/60 Hz

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz

RS-232 Male to Male Cable

Micro USB Cable

Standard Extender Kit Installation

1. Make sure all equipment in the installation—such as TVs, Blu-ray

players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the HDMI source to the INPUT

port on the local transmitter unit.

3. Optional: Using an HDMI 2.0 cable (such as Tripp Lite

P569-XXX-CERT or P568-XXX-2A Series cables), connect a local

monitor to the LOCAL port on the B127E-1A1-HH local transmitter

unit. Monitors with varying resolutions such as 4K 30Hz or 1080p

can be connected without affecting the 4K 60Hz signal transmission.

Using Cat6 cable up to 328 ft. (100 m), connect the RJ45 port on the

local transmitter unit to the RJ45 port on the remote receiver unit.

5. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the remote receiver unit’s HDMI

port to a monitor.

6. Turn the power ON to your connected TVs/monitors. The LOCAL

(orange) LED will illuminate to indicate the local port has been

connected to a display.

7. Connect the external power supply to the local transmitter unit and

plug it into an available wall outlet or (optional) a Tripp Lite Surge

Protector, Power Distribution Unit (PDU) or Uninterruptible Power

Supply (UPS). The POWER (green) LED on the local transmitter unit

will illuminate to indicate the unit is receiving power from the external

power supply. The POWER (green) LED on the remote receiver unit

will illuminate to indicate the unit is receiving power from the local

transmitter unit through PoC technology.

8. Turn ON the power to the HDMI source. The TX (orange) LED on the

local transmitter unit illuminates to indicate a signal is being received

from the source. The RX (orange) LED on the receiver unit illuminates

to indicate a signal is being received from the source to the display.

Standard Extender Kit Installation

9. The (orange) Link LEDs will illuminate on both local transmitter and

remote receiver units to indicate a successful connection has been

made between the two units. The screen should now display on the

connected monitor.

USB/IR/RS-232 Controls

The extender kit provides the following functional controls:

• USB 1.1 – One Micro-USB input at transmitter, dual USB-A outputs at

receiver

• Bi-Directional IR–Dual 3.5 mm jacks at both the transmitter and

receiver

• RS-232 – One 3-pin phoenix connector at both the transmitter and

receiver

(Optional) Connect the computer’s DB9 port to the transmitter unit’s

RS-232 serial port. The serial port is a 3-position phoenix connector for

RS-232 (DB connector) pin 2, 3 and 7 connection. Connect your RS-232

device (e.g. barcode scanner) to the 3-position phoenix connector on the

receiver unit.

(Optional) Connect the included IR-OUT cable to the transmitter unit’s

IR-OUT port. Place the sensor on the IR-OUT cable in an unobstructed

area within clear view of the device being controlled. Then connect the

included IR-IN cable to the receiver unit’s IR-IN port. The IR-IN cable will

communicate the desired command via the transmitter’s IR-OUT cable.

Note: The IR-OUT cable receives the signal from the remote control and sends

it to the device being controlled (e.g. Blu-ray™ player, etc.).

(Optional) With a user-supplied USB Micro-B cable (such as Tripp Lite

U050-XXX Series USB cable), connect to the transmitter’s Micro-B port.

Then connect a keyboard and mouse to the available USB-A ports on the

receiver unit.

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year

from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its

sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material

Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to

TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied

by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not

apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or

modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion

of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL

OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not liable for any costs, such as lost proﬁts or revenue, loss of

equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or

otherwise.

PRODUCT REGISTRATION

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing

for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive

and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite

they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

WARNING

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to

cause the failure of the life support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice. Photos and

illustrations may differ slightly from actual products.

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

19-12-001 93-394C_RevB

Inhaltsverzeichnis

Andere Tripp Lite Extender Handbücher

Tripp Lite

Tripp Lite B127-1A1-WHD1 Bedienungsanleitung

Tripp Lite

Tripp Lite B132-004A Bedienungsanleitung

Tripp Lite

Tripp Lite B140-101X-U Bedienungsanleitung

Tripp Lite

Tripp Lite B127U-002-PDPH2 Bedienungsanleitung

Tripp Lite

Tripp Lite B125-101-60-IR Bedienungsanleitung

Tripp Lite

Tripp Lite B127F-1A1-MM-DD Bedienungsanleitung

Tripp Lite

Tripp Lite NPOE-EXT-2X1G30 Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101-2: B130-101A-2 Bedienungsanleitung

Tripp Lite

Tripp Lite B127U-111-PHPH Bedienungsanleitung

Tripp Lite

Tripp Lite B165-101 Bedienungsanleitung

Tripp Lite

Tripp Lite B203-101-POC Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101A-WP Bedienungsanleitung

Tripp Lite

Tripp Lite B126-004 Bedienungsanleitung

Tripp Lite

Tripp Lite B125-150 Bedienungsanleitung

Tripp Lite

Tripp Lite Wireless Console Extender B014-000 Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1-POC Bedienungsanleitung

Tripp Lite

Tripp Lite HDMI B122-000 Bedienungsanleitung

Tripp Lite

Tripp Lite B150-1A1-HDMI Bedienungsanleitung

Tripp Lite

Tripp Lite B122-000-4K6 Bedienungsanleitung

Tripp Lite

Tripp Lite B118-2X4-4K-A Bedienungsanleitung

Tripp Lite

Tripp Lite B136-004 Bedienungsanleitung

Tripp Lite

Tripp Lite B126-2P2M-POC Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1D10-WHD1 Bedienungsanleitung

Tripp Lite

Tripp Lite B203-101 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung