Tripp Lite B150-1A1-DVI Bedienungsanleitung

Owner’s Manual

DisplayPort to DVI over

Cat5 Extender Kit

Model: B150-1A1-DVI

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an ISOBAR6ULTRA

surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

15-11-118-933506-EN.indd 1 11/13/2015 2:29:38 PM

Product Features

Package Includes

Optional Accessories

System Requirements

• Converts a DisplayPort video signal for use with a DVI display

• Extends a 1920 x 1080 (1080p) @ 60 Hz video signal up to 125 ft.

• Supports 24-bit True Color (8 bits per channel)

• Micro USB ports supply power to the transmitter and receiver units—

no external power supplies required

• Plug and play—no software or drivers required

• B150-1A1-DVI Transmitter Unit

• B150-1A1-DVI Receiver Unit

• Screwdriver for Equalization Adjustment

• (x2) Micro USB Cables – 3 ft.

• Owner’s Manual

• N202-Series Cat6 24 AWG Solid-Wire Patch Cables

• UR05C-Series USB Micro-B Charge-Only Cables

• U280-002-W12 2-Port USB Wall Charger

• UAC-1B 1-Port USB Wall Charger

• Computer with DisplayPort output port

• Display with DVI input port

15-11-118-933506-EN.indd 2 11/13/2015 2:29:38 PM

Installation

Note:

1. Test to make sure the entire installation works properly before pulling cables

through ceilings/walls.

2. To achieve maximum distance and performance, 24 AWG solid-wire Cat5e/6

cable must be used. The use of stranded-wire Cat5e/6 cable or cable with a

gauge size higher than 24 AWG will result in a shorter extension distance. All

TRIPP LITE N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.

3. Make sure the power to all connected devices is turned off prior to installation.

24 AWG SOLID-WIRE

CAT5/6 CABLE

DISPLAYPORT

COMPUTER

DVI

DISPLAY

Up to 125 ft. at 1920 x 1080 (1080p) @ 60 Hz

1. Connect the transmitter unit’s built-in DisplayPort cable to the

computer’s DisplayPort output port.

2. Connect the included USB Micro-B cable to the transmitter unit and a

USB port on the computer or a USB wall outlet. The green and orange

LEDs on the transmitter unit’s RJ45 ports will illuminate to indicate it is

receiving power from the USB Micro-B cable.

3. Connect the RJ45 port on the transmitter to the RJ45 port on the

receiver using Cat5e/6 cable.

Note: See the installation diagrams for maximum extension distance and video

resolutions.

Connect the receiver unit’s built-in DVI cable to a DVI monitor input port.

5. Connect the included USB Micro-B cable to the receiver unit and a

USB port on the display or a USB wall outlet. The green LED on the

receiver’s RJ45 port will illuminate to indicate it is receiving power from

the USB Micro-B cable.

15-11-118-933506-EN.indd 3 11/13/2015 2:29:39 PM

Troubleshooting

If you are unable to get an acceptable image after following the

installation instructions, try the troubleshooting tips below.

1. Are the USB Micro-B cables that shipped with the product

connected and plugged into a working power source? For the

product to function properly, it must be connected to and receiving

power from the USB Micro-B cables.

2. Was the power to the DisplayPort source turned off prior to

installation? If not, restart your computer.

3. What resolution are you trying to reach? See the Product

Features and Installation sections in this manual for details on

maximum distance and resolution. The shorter the extension distance,

the higher the resolution you will be able to obtain. If you are not able

to receive an acceptable image, try lowering your computer’s video

resolution or adjusting the refresh rate.

4. What type of cabling are you using? Inferior cabling can result in

poor performance, so it is important you use cables that can support

the video resolution you are trying to obtain. To achieve maximum

distance and resolution, 24 AWG solid-wire UTP cable (such as

TRIPP LITE’s N202-Series cables) must be used.

Installation

6. Power on the DisplayPort source and the DVI display. The orange LED

on the receiver unit’s RJ45 port will illuminate to indicate it is receiving

a signal from the source.

7. If necessary, use the Equalization control to adjust the video image.

Note: An improper Equalization setting can result in no image being displayed at

all. If an image is not displayed on your monitor, try adjusting the Equalization.

15-11-118-933506-EN.indd 4 11/13/2015 2:29:39 PM

Troubleshooting

5. Test your cables to ensure they are working properly. For example,

connect your Cat5e/6 cable between a computer and a network to

verify it establishes a network connection.

6. Do you have any patch panels or other devices between the

transmitter and receiver units? TRIPP LITE’s DisplayPort to DVI over

Cat5 Extender Kit is designed to connect directly from the transmitter

to the receiver via UTP cable. The more connection points that are

between the source and the remote monitor, the more likely that

signal degradation will occur, causing poor performance. If you have a

patch panel or other device between, it should be removed from the

installation.

7. Do you have a splitter, switch or other device between the

computer and transmitter or between the receiver and display?

TRIPP LITE’s DisplayPort to DVI over Cat5 Extender Kit is designed for

the transmitter to connect directly with the source computer and for

the receiver to connect directly to the display. If you have a splitter,

switch, or other device between, it should be removed from the

installation.

8. Check your cabling for any damages that may have occurred

during installation. If a cable connector is loosened from being

pulled through ceilings/walls or the cable jacket is damaged, causing

the wiring to be exposed, you will not be able to achieve maximum

performance.

9. Are the transmitter and/or receiver units located in an area

that exposes them to elevated temperatures? If the product is

overheating, it will not function properly.

15-11-118-933506-EN.indd 5 11/13/2015 2:29:39 PM

Warranty and Product Registration

1-YEAR LIMITED WARRANTY

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period

of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is

limited to repairing or replacing (at its sole option) any such defective products. To obtain service

under this warranty, you must obtain a Returned Material Authorization (RMA) number from

TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE

or an authorized TRIPP LITE service center with transportation charges prepaid and must be

accompanied by a brief description of the problem encountered and proof of date and place of

purchase. This warranty does not apply to equipment, which has been damaged by accident,

negligence or misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid

limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS

PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, TRIPP LITE

is not liable for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of

equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or

otherwise.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new TRIPP LITE product. You’ll be

automatically entered into a drawing for a chance to win a FREE TRIPP LITE product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

15-11-118-933506-EN.indd 6 11/13/2015 2:29:39 PM

Warranty and Product Registration

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modiﬁcations to this equipment not expressly approved by TRIPP LITE could void

the user’s authority to operate this equipment.

WEEE Compliance Information for TRIPP LITE Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and

implementing regulations, when customers buy new electrical and electronic equipment

from TRIPP LITE they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis

(this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to signiﬁcantly affect its safety

or effectiveness is not recommended. Do not use this equipment in the presence of a ﬂammable

anesthetic mixture with air, oxygen or nitrous oxide.

TRIPP LITE has a policy of continuous improvement. Speciﬁcations are subject to change without

notice.

15-11-118-933506-EN.indd 7 11/13/2015 2:29:39 PM

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

15-11-118 • 93-3506_revB

15-11-118-933506-EN.indd 8 11/13/2015 2:29:42 PM

Inhaltsverzeichnis

Andere Tripp Lite Extender Handbücher

Tripp Lite

Tripp Lite B127-2A1-HH Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1-WHD4HH Bedienungsanleitung

Tripp Lite

Tripp Lite B127-1A1-WHD1 Bedienungsanleitung

Tripp Lite

Tripp Lite 8TLP167000 Bedienungsanleitung

Tripp Lite

Tripp Lite B136-004 Bedienungsanleitung

Tripp Lite

Tripp Lite B127U-002-PDPH2 Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1-WHD1 Bedienungsanleitung

Tripp Lite

Tripp Lite P166-001-A Bedienungsanleitung

Tripp Lite

Tripp Lite B140-002-DD Bedienungsanleitung

Tripp Lite

Tripp Lite B162-001-POE Bedienungsanleitung

Tripp Lite

Tripp Lite B127A-4X1-BH Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101A Bedienungsanleitung

Tripp Lite

Tripp Lite HDMI Extender B122-000 Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101S-WP Bedienungsanleitung

Tripp Lite

Tripp Lite B126-2P2M-POC Bedienungsanleitung

Tripp Lite

Tripp Lite B203-104-PNP Bedienungsanleitung

Tripp Lite

Tripp Lite 0DT23001 Bedienungsanleitung

Tripp Lite

Tripp Lite 0DT23001 Bedienungsanleitung

Tripp Lite

Tripp Lite B127A-1A1-BHBH Bedienungsanleitung

Tripp Lite

Tripp Lite B150-1A1-HDMI Bedienungsanleitung

Tripp Lite

Tripp Lite B120-000-SL Bedienungsanleitung

Tripp Lite

Tripp Lite B162-100-POE Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101 Bedienungsanleitung

Tripp Lite

Tripp Lite B013-000 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung