Tripp Lite DMCVW4555X4 Bedienungsanleitung

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Owner’s Manual

Heavy-Duty

Quad-Monitor Mobile Video Wall

Model: DMCVW4555X4

Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com

Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com

Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.com

Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com

200x200 / 300x300 / 400x200

400x400 / 600x400 55"

MAX 132 lb. x 4

(60 kg) x 4

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

NOTE: Read the entire instruction manual before you start assembly and installation.

Warranty and Product Registration

WARNING

• Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If

you have questions regarding any of the instructions or warnings, please visit www.tripplite.com/support.

• This product was designed to be installed and utilized ONLY as speciﬁed in this manual. Improper installation of this product

may cause damage or serious injury.

• This product should only be installed by someone of good mechanical ability, with basic building experience and a full

understanding of this instruction manual.

• Make sure the unit can safely support the combined load of the equipment and all attached hardware and components.

• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• This product is intended for indoor use only. Using this product outdoors could lead to product failure and/or personal injury.

5-Year Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 5 years from the date

of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES

OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES

OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND

CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you speciﬁc legal rights, and you may have other rights which vary from

jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are

subject to great variation, the manufacturer makes no representation or warranty as to the suitability or ﬁtness of these devices for any speciﬁc application.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice. Photos and illustrations may differ slightly from actual products.

Component Checklist

IMPORTANT: Ensure you have received all parts according to the component checklist prior to installing. If any parts are missing

or faulty, visit www.tripplite.com/support for service.

Middle Base

(x1)

Left Base

(x1)

Right Base

(x1)

Universal Plate

(x2)

Left Cover

(x1)

Right Cover

(x1)

Adapter Bracket

(x8)

Caster Wheel with Brake

(x2)

Caster Wheel

(x2)

Combo Lock

(x4)

Connecting Piece

(x2)

Top Cover

(x2)

Cable Clamp

(x16)

Plastic Cover

(x4)

Support Plate

(x4)

Column

(x2)

Package M

Package A

Package P

M-A

M5x14

(x16)

M-B

M6x14

(x16)

M-C

M8x20

(x16)

M-D

M6x30

(x16)

M-E

M8x30

(x16)

M-F

Washer

(x16)

M-G

Small Spacer

(x32)

M-H

Big Spacer

(x16)

A-D

Wrench

(x1)

A-B

5 mm Hex Key

(x1)

A-A

3 mm Hex Key

(x1)

A-C

6 mm Hex Key

(x1)

P-B

M6x20

(x2)

P-C

M8x65

(x8)

P-D

M8x16

(x8)

P-E

M8x35

(x8)

P-F

D8 Washer

(x4)

P-A

ST4.2x9.5

(x8)

Assembly

1Assemble the Base

A-C P-C

A-D

Note: Position base assembly

with wheels facing forward.

Note: Lock the

brakes on the casters

to avoid any sudden

movements during

installation.

Each caster can be adjusted

independently for ﬁne tuning. Using the

wrench (A-D), slightly turn each caster

nut to lower or raise the base.

Using M8x65 screws (P-C) and the 6 mm hex key (A-C), attach the left and right base to the middle base.

Assembly

Attach the Columns to the Base

Install the Covers

Attach the left cover (D) and right cover (E) to the base.

Insert the two connecting pieces (K) to attach the columns (J) to the base. Use M8x35 screws (P-E), D8 washers (P-F) and the 6 mm

hex key (A-C) to secure the connecting pieces and columns to the base.

P-F

P-E

A-C

Assembly

4Install the Support Plates

A-B

X + 0.2” (5 mm)

(X=Height of display)

Slide the ﬁrst set of support

plates (I) onto the columns,

making sure the arrow on the

support plates are pointing up.

Slide the second set of support plates (I)

onto the column, making sure the arrows

on the support plates are pointing up.

Allow enough space

between the two

universal plates. Set a

distance of the height

of the display plus

0.2" (5 mm)

Once the support plate

positions have been

determined, use the 5 mm

hex key (A-B) to secure

them to the columns.

Keep the

support plates

at the same

level.

Assembly

5Install the Universal Plates

P-B

P-A

Slide the universal plates (F) into the support plates,

making sure to align the holes in the universal plates

with the holes in the support plates.

Use the ST4.2x9.5 screws

(P-A) to attach the four plastic

covers (H) to each end of the

universal plates.

Use the M6x20 screws (P-B) and wrench (A-D) to secure the universal

plates to the support plates. Do not over-tighten the screws.

A-D

Assembly

Install the Top Covers

Install the Adapter Brackets

Top of the

display.

Using M8x16 screws (P-D) and the

6 mm hex key (A-C), attach the

top covers (L) to the columns.

P-D

A-C

Assembly

Install the Adapter Brackets

For Flat-Back Screens

Install the Adapter Brackets

For Recessed-Back Screen

or to Access A/V Inputs

Note: Choose appropriate screws and spacers according to the type of screens.

• Position the adapter brackets as close as possible to the center of the display.

• Screw the adapter brackets onto the display.

• Repeat procedure for the second display.

Tighten all screws, but do not over-tighten.

Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen.

• Position the adapter brackets as close as possible to the center of the display.

• Screw the adapter brackets onto the display.

• Repeat procedure for the second display.

Tighten all screws, but do not over-tighten.

M-A / M-B / M-C

M-F

M-C / M-D / M-E M-D / M-E M-D / M-E

M-C

M-F or or or

M-F

M-G M-G

M-G

M-H M-H

M-F M-F

Assembly

8Attach the Displays onto the Universal Plates

Note: When installing the displays, make

sure to work from the bottom universal

plate to the top universal plate.

Use the combo locks (P)

to protect the displays

from tampering and theft.

Note: Make sure to

leave a 1 mm gap

between both displays.

• Using an assistant or mechanical lifting

equipment, carefully lift the display and

pull down the two adapter bracket straps at

the same time. Hook the display’s adapter

brackets over the top of the universal wall

plate. Release the adapter bracket straps to

secure the display to the universal plate.

• Repeat procedure for the second, third and

fourth displays.

1 mm

Andere Handbücher für DMCVW4555X4

Inhaltsverzeichnis

Andere Tripp Lite Rack & Stand Handbücher

Tripp Lite

Tripp Lite DMPDT1732AM Bedienungsanleitung

Tripp Lite

Tripp Lite WWSSCOS40AM Bedienungsanleitung

Tripp Lite

Tripp Lite SRSHELF4PKYBD Bedienungsanleitung

Tripp Lite

Tripp Lite DWF1323M Bedienungsanleitung

Tripp Lite

Tripp Lite PSCLAMP Bedienungsanleitung

Tripp Lite

Tripp Lite DCTM Bedienungsanleitung

Tripp Lite

Tripp Lite DWM1737MA Bedienungsanleitung

Tripp Lite

Tripp Lite DWM3770X Bedienungsanleitung

Tripp Lite

Tripp Lite MR1411M Bedienungsanleitung

Tripp Lite

Tripp Lite N48M Series Bedienungsanleitung

Tripp Lite

Tripp Lite Safe-IT WWSSFDSAM Bedienungsanleitung

Tripp Lite

Tripp Lite DWT3270X Bedienungsanleitung

Tripp Lite

Tripp Lite DMACUSB Bedienungsanleitung

Tripp Lite

Tripp Lite DDR1327SDFC-1 Bedienungsanleitung

Tripp Lite

Tripp Lite DMCVW4555X4 Bedienungsanleitung

Tripp Lite

Tripp Lite SRLCDMOUNT Bedienungsanleitung

Tripp Lite

Tripp Lite DWM1742MN Bedienungsanleitung

Tripp Lite

Tripp Lite DWF2670X Bedienungsanleitung

Tripp Lite

Tripp Lite Dual Flat Screen Flex ArmDesk Clamp Bedienungsanleitung

Tripp Lite

Tripp Lite DWF1323M Bedienungsanleitung

Tripp Lite

Tripp Lite WWSSCOS26AM Bedienungsanleitung

Tripp Lite

Tripp Lite SRW12U Bedienungsanleitung

Tripp Lite

Tripp Lite DWFSC3780MUL Bedienungsanleitung

Tripp Lite

Tripp Lite SR2POST Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung