Tripp Lite B110-SP-POE Bedienungsanleitung

Quick Start Guide

Digital Signage In-Line 1G

POE Surge Protector

Model: B110-SP-POE

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Este guía esta disponible en español en la página de Tripp Lite:

www.tripplite.com/support

Ce guide est disponible en français sur le site Web de Tripp Lite :

www.tripplite.com/support

Русскоязычная версия настоящего краткого руководства представлена

на веб-сайте компании Tripp Lite по адресу: www.tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

www.tripplite.com/warranty

19-03-092-93389F-EN.indd 1 5/17/2019 1:01:45 PM

Package Includes

Product Features

• B110-SP-POE

• Grounding Wire, 12 in. / 305 mm

• Mounting Screws (x4)

• Screw Anchors (x4)

• Grounding Wire Screw

• Quick Start Guide

• Protects your Power over Ethernet (PoE) device’s inputs and outputs against

electrostatic discharge (ESD), lightning surges and cable discharge events

• Meets the following IEC/EN regulations:

o IEC61000-4-2 / IEC61000-4-5 (ESD) 30kV (Air, Contact)

o EN61000-4-5 (Lightning) 5kA (8/20µs) / 4kV (10/700µs)

• Supports network data transmission speeds up to 1 Gbps

• Lightning reaction speed < 1 ns

• Solid-state silicon-avalanche technology

• Meets IEEE standards 802.3af and 802.3at

• Supports both mid- and end-span PoE

• Easy in-line installation with integrated mounting ears

• Passive by design – no external power required

19-03-092-93389F-EN.indd 2 5/17/2019 1:01:45 PM

Protection

Installation

Note: The following instructions assume that two PoE devices are currently connected

together.

Single Device Protection:

1. Disconnect the installed patch cable from the device you wish to protect

and attach this cable to the “Cable End” of the In-Line 1G PoE Surge

Protector.

2. Using a Cat5/5e/6 patch cable (not included), connect the device to be

protected to the “Equipment End” of the In-Line 1G PoE Surge Protector.

Note: For the best protection performance, the patch cable between the

“Equipment End” of the In-Line 1G PoE Surge Protector and the equipment to

be protected should not exceed 300 ft. (90 m). Tripp Lite’s N001-Series Cat5e

Snagless Patch Cables are recommended.

3. Connect the ground wire to the In-Line 1G PoE Surge Protector and then

to earth ground.

IP Phone

PoE Hub

PoE Camera

PoE NVR

Equipment End

PoE Equipment

(Protected)

PoE Sources

(Unprotected)

In-Line 1G PoE

Surge Protector

Cable End

19-03-092-93389F-EN.indd 3 5/17/2019 1:01:45 PM

Installation

Multiple Device Protection:

Note: The max distance between any two In-Line 1G PoE Surge Protectors is 328 ft.

(100 m).

1. Disconnect the installed patch cable from both of the devices you wish to

protect.

2. Connect an In-Line 1G PoE Surge Protector to each end of the previously

uninstalled patch cable, ensuring both ends of the patch cable are

connected to the “Cable End” of the In-Line 1G PoE Surge Protector.

3. Using Cat5/5e/6 patch cables (not included), connect the “Equipment

End” of each In-Line 1G PoE Surge Protector to the PoE device and

equipment you wish to protect.

Note: For the best protection performance, the Cat5/5e/6 patch cable between

the “Equipment End” of the In-Line 1G PoE Surge Protector and the PoE

equipment to be protected should not exceed 300 ft. (90 m). Tripp Lite’s

N001-Series Cat5e Snagless Patch cables are recommended.

4. Connect the ground wire to each In-Line Surge Protector and then to earth

ground.

Equipment End

Cable End

Equipment End

Cable End

328 ft.

(100 m) Max

PoE Equipment

(Protected)

PoE Sources

(Protected)

PoE Hub

PoE NVR

IP Phone PoE Camera

19-03-092-93389F-EN.indd 4 5/17/2019 1:01:45 PM

Speciﬁcations

Input / Output Connectors RJ45 (Female)

ESD Protection 30kV (Air, Contact)

Lightning Protection 5kA (8/20 µs) / 4kV (10/700µs)

Lightning Protection Reaction Speed <1 ns

Operating Temp 14 to 158°F / -10 to 70 °C

Storage Temp -40 to 194°F / -40 to 90°C

Bandwidth (Date Rate) Up to 1 Gbps

IEEE Standards Supported 802.3af/at

Dimensions 2.63 x 3.43 x 1.06 in. /

67 x 87 x 27 mm

Weight 0.28 lb. / 127 g

19-03-092-93389F-EN.indd 5 5/17/2019 1:01:45 PM

Warranty and Product Registration

2-Year Limited Warranty

Tripp Lite warrants its products to be free from defects in materials and workmanship for a period

of two (2) years from the date of initial purchase. Tripp Lite’s obligation under this warranty is

limited to repairing or replacing (at its sole option) any such defective products. To obtain service

under this warranty, you must obtain a Returned Material Authorization (RMA) number from

Tripp Lite or an authorized Tripp Lite service center. Products must be returned to Tripp Lite or an

authorized Tripp Lite service center with transportation charges prepaid and must be accompanied

by a brief description of the problem encountered and proof of date and place of purchase. This

warranty does not apply to equipment, which has been damaged by accident, negligence or

misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, Tripp Lite MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid

limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL Tripp Lite BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS

PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, Tripp Lite is not

liable for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment,

loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Product Registration

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be

automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to signiﬁcantly affect its safety

or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without

notice. Photos and illustrations may differ slightly from actual products.

19-03-092-93389F-EN.indd 6 5/17/2019 1:01:45 PM

19-03-092-93389F-EN.indd 7 5/17/2019 1:01:45 PM

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

19-03-092 93-389F_RevB

19-03-092-93389F-EN.indd 8 5/17/2019 1:01:45 PM

Inhaltsverzeichnis

Andere Tripp Lite Überspannungsschutz Handbücher

Tripp Lite

Tripp Lite TLP808TEL Bedienungsanleitung

Tripp Lite

Tripp Lite SK30USB Bedienungsanleitung

Tripp Lite

Tripp Lite TLP725 Bedienungsanleitung

Tripp Lite

Tripp Lite Data Shield Bedienungsanleitung

Tripp Lite

Tripp Lite TLP810NET Bedienungsanleitung

Tripp Lite

Tripp Lite isobar HT1210ISOCTR Bedienungsanleitung

Tripp Lite

Tripp Lite IBAR4 Bedienungsanleitung

Tripp Lite

Tripp Lite Protect It! TLP310USBC Bedienungsanleitung

Tripp Lite

Tripp Lite is250hg Bedienungsanleitung

Tripp Lite

Tripp Lite Protect It! SK34USBB Bedienungsanleitung

Tripp Lite

Tripp Lite TRAVELERC8 Bedienungsanleitung

Tripp Lite

Tripp Lite AV10IRG Bedienungsanleitung

Tripp Lite

Tripp Lite IBAR4 Bedienungsanleitung

Tripp Lite

Tripp Lite TLP808NETG Konfigurationshandbuch

Tripp Lite

Tripp Lite TLP604TEL Bedienungsanleitung

Tripp Lite

Tripp Lite SK10TG Bedienungsanleitung

Tripp Lite

Tripp Lite IBAR12 Bedienungsanleitung

Tripp Lite

Tripp Lite TLP604 Bedienungsanleitung

Tripp Lite

Tripp Lite ISOBLOK2-0 Bedienungsanleitung

Tripp Lite

Tripp Lite DCATV Bedienungsanleitung

Tripp Lite

Tripp Lite SPS606HGRA Bedienungsanleitung

Tripp Lite

Tripp Lite SWIVEL6 Bedienungsanleitung

Tripp Lite

Tripp Lite LC 1200 Bedienungsanleitung

Tripp Lite

Tripp Lite TLP2USBD Bedienungsanleitung

Beliebte Überspannungsschutz Handbücher anderer Marken

ELAC

ELAC ProteK PR91-W Bedienungsanleitung

Tsubaki

Tsubaki TSM4000M1 Bedienungsanleitung

QVS

QVS PP134C Bedienungsanleitung

CyberPower

CyberPower CSP604T Bedienungsanleitung

Davis Instruments

Davis Instruments Radio Surge Protector Bedienungsanleitung

M-system

M-system MGA-100 Bedienungsanleitung

CyberPower

CyberPower CSP706T Bedienungsanleitung

CyberPower

CyberPower B300WRC1 Bedienungsanleitung

M-system

M-system MGD-24 Bedienungsanleitung

Leviton

Leviton 51120-3R Bedienungsanleitung

Panamax

Panamax MAX 5400-EX Bedienungsanleitung

CyberPower

CyberPower B1006T Bedienungsanleitung

OBO Bettermann

OBO Bettermann ÜSM-20-230I1PE65 Bedienungsanleitung

Minuteman

Minuteman MMS7120RCT Bedienungsanleitung

Leviton

Leviton 52412-DS3 Bedienungsanleitung

Savio

Savio LZ-07 Bedienungsanleitung

Siemens

Siemens HNM3M120 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric LITOL LTM-125RF Bedienungsanleitung