Tripp Lite 108 Bedienungsanleitung

Smart CAT5 Switch - 108

and 116

Quick Start Guide

1. Introduction

To take advantage of the full range of features, we recommend you read the softcopy

User Guide after performing the Quick Start procedure. It’s in PDF format on the

supplied CD or on our website www.minicom.com in the S

upport section.

Access and control multiple multi-

platform computers from one Keyboard Video

Mouse (KVM) console with the Smart CAT5 Switch (Smart CAT5) system. The Smart

CAT5 comes in 108 and 116 models. Connect up to 8 computers to the 108 model, and

up to 16 to the 116 model.

2. System components

The Smart CAT5 system consists of:

Smart CAT5 Switch 108 or 116

RICC on Cable (ROCS) - PS/2, USB

CAT5 cables (1.5m provided)

RS232 Serial cable

Rack mounts for the Smart CAT5

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

and 116

To take advantage of the full range of features, we recommend you read the softcopy

User Guide after performing the Quick Start procedure. It’s in PDF format on the

upport section.

platform computers from one Keyboard Video

Mouse (KVM) console with the Smart CAT5 Switch (Smart CAT5) system. The Smart

CAT5 comes in 108 and 116 models. Connect up to 8 computers to the 108 model, and

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

SMART CAT5 SWITCH – 108/116

3. The Smart CAT5 system configuration

Figure 1 illustrates the basic configuration of the Smart CAT5 system.

Figure 1 Smart CAT5 system configuration

4. The Smart CAT5 models

The figure below illustrates the rear panel of the Smart CAT5 116. The 108 model is

the same but with only 8 Computer ports.

Figure 2 Smart CAT5 116 rear panel

5. Pre-installation guidelines

Switch off all computers

Place cables away from fluorescent lights, air conditioners, and machines that are

likely to generate electrical noise

Ensure that the maximum distance between each computer and the Smart CAT5,

does not exceed 10m/33ft

Workstation

To servers

MINICOM

POWER

100-240 VAC 50/60 Hz 12345678

10 11 12 13 14 15 169 COMPUTER

www.minicom.com

SMART CAT5 SWITCH 116

RoC/RICCs

to servers

POWER

100-240 VAC 50/60 Hz 12345678

10 11 12 13 14 15 169 COMPUTER

www.minicom.com

QUICK START GUIDE

6. Connecting the Smart CAT5 system

Each computer / server is directly connected to the Smart CAT5 via the appropriate

ROC using CAT5 cable in a star configuration. No external power is needed at the

remote ROCs. The ROCs draw their power from the computer’s keyboard port (ROC

PS/2) or from the USB port (ROC USB). The figures below illustrate the ROC PS/2

and ROC USB.

Figure 3 ROC PS/2 Figure 4 ROC USB

Connecting the KVM console

Connect a KVM console to the Smart CAT5 as illustrated in Figure 1 above.

Connecting a ROC to each computer

Connect the ROCs as detailed in the figures above.

Connecting the CAT5 cables

1. Connect one connector to the ROC’s RJ45 port.

2. Connect the other connector to one of the Smart CAT5’s Computer ports.

3. Follow the above 2 steps for each computer.

7. Connecting the power supply

1. Connect the Smart CAT5 to the power supply using the Power cable provided. Use

only power cord supplied with the unit.

2. Switch on the computers.

8. Operating the Smart CAT5 system

Below is a brief outline of how to switch between computers. See the softcopy User

Guide for the full operating details.

To computer’s

keyboard port

To computer’s

mouse port

To computer’s

Video card

To computer’s

USB Port

To computer’s

Video Card

SMART CAT5 SWITCH – 108/116

Switch between the connected computers by either

The front panel Select buttons

Keyboard hotkeys - To switch to the next computer forwards press Shift then,

+. Release Shift, before pressing +. To switch to the next computer backwards

press Shift then, -. Release Shift, before pressing -.

Control software (See softcopy User Guide)

The OSD

The OSD is also the place to adjust various settings as explained in the softcopy User

Guide.

When switching computers the illuminated LED of the top row indicates which

computer is currently selected.

9. The OSD

To display the OSD:

Press Shift twice. The OSD Main window appears.

Navigating the OSD

To navigate up and down use the Up and Down arrow keys.

To exit the OSD press Esc.

10. Selecting a computer

To select a computer:

1. Navigate to the desired computer line.

Or, type the port number of the desired computer.

2. Press Enter. The selected computer is accessed. An OSD label appears showing

which computer is accessed.

Note! When the OSD is displayed you cannot select computers using the front panel

Select buttons or the keyboard hotkeys.

11. Resetting the switch

To reset the switch press the 2 front panel Select buttons simultaneously. The ROCs

are unaffected by this reset.

For the rest of the configuration and operating instructions please see the softcopy User

Guide on the supplied CD or on our website

http://www.minicom.com/supportuserguides.htm

201204197 • 933194_EN

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tripp Lite Schalten Handbücher

Tripp Lite

Tripp Lite B004-008 Bedienungsanleitung

Tripp Lite

Tripp Lite B004-008 Bedienungsanleitung

Tripp Lite

Tripp Lite U460-003-3AGB-C Bedienungsanleitung

Tripp Lite

Tripp Lite 0SU70032 Bedienungsanleitung

Tripp Lite

Tripp Lite B170-002-R Bedienungsanleitung

Tripp Lite

Tripp Lite WEXT5-B072-016 Bedienungsanleitung

Tripp Lite

Tripp Lite B020-016-17-IP Bedienungsanleitung

Tripp Lite

Tripp Lite B070-016-19-IP Bedienungsanleitung

Tripp Lite

Tripp Lite U224-4R4-R Bedienungsanleitung

Tripp Lite

Tripp Lite NetCommander B072-016-IP4 Bedienungsanleitung

Tripp Lite

Tripp Lite U460-002-2AM-C Bedienungsanleitung

Tripp Lite

Tripp Lite U336-U03-GB Bedienungsanleitung

Tripp Lite

Tripp Lite B005-HUA2-K Bedienungsanleitung

Tripp Lite

Tripp Lite B004-008 Bedienungsanleitung

Tripp Lite

Tripp Lite NGS8C2 Bedienungsanleitung

Tripp Lite

Tripp Lite B119-003 Bedienungsanleitung

Tripp Lite

Tripp Lite B119-4X1-MV Bedienungsanleitung

Tripp Lite

Tripp Lite NetController B040-008-19 Bedienungsanleitung

Tripp Lite

Tripp Lite U223-007-IND Bedienungsanleitung

Tripp Lite

Tripp Lite N252-024-6A-SH Bedienungsanleitung

Tripp Lite

Tripp Lite NSU-G16 Bedienungsanleitung

Tripp Lite

Tripp Lite NGI-M08POE8-L2 Bedienungsanleitung

Tripp Lite

Tripp Lite B022-004-R Bedienungsanleitung

Tripp Lite

Tripp Lite U227-FT3-R Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung