Tripp Lite SmartOnline SU80KX2 Installationsanleitung
SmartOnline 80kVA Modular 3-Phase UPS System,
On-line Double-Conversion International UPS
MODEL NUMBER: SU80KX2
Description
Tripp Lite SU80KX2 80kVA SmartOnline Modular 3-Phase Intelligent, True On-Line Double-Conversion UPS
System provides 100% system availability with N+1 modular architecture and parallel capability. In N+1
configurations, SU80KX2 provides 4 self-contained, redundant 20kVA power modules that support
hot-swappable maintenance as connected equipment remains powered. Two open slots for up to two additional
20kVA power modules offers increased capacity upgrades to 120kVA. In parallel applications, configured and
installed by a Tripp Lite authorized technician, up to 4 SU80KX2 models can be connected to provide fail-safe
redundancy (two 80kVA models supporting up to 80kVA total load) or increased capacity (two 80kVA models
supporting up to 160kVA total load). Large capacity 80,000VA / 64,000W UPS continually converts incoming AC
power into filtered DC and resynthesizes output into perfectly regulated continuous sine wave AC output with less than 3% THD. Zero transfer time assures
compatibility with all equipment types. High input power factor, advanced IGBT inverter and Digital Signal Processor (DSP) technology produce less than 4%
input total harmonic distortion (THDi). With low THDi, generators run cooler and last longer, allowing managers to save installation costs by installing a
generator with a capacity equal to the equipment load (1:1 ratio). Up to 97% efficiency in optional economy mode reduces operating costs and BTU output.
Hardwire input and output connections support a variety of permanent or PDU power connections. Frequency is 50 or 60 Hz (auto-selectable). SU80KX2
power modules are housed in a single small-footprint tower compartment. Compatible battery pack models BP480V55, BP480V78, BP480V103 and
BP480V140 (sold separately) are housed in a separate stand-alone hardwired external battery compartment. Battery runtime can be extended with additional
stand-alone hardwired external battery modules. A manual bypass breaker and an automatic bypass function ensure 100% availability of connected
equipment by safely passing through AC power if the UPS requires maintenance.
Features
True On-Line Double-Conversion 80kVA / 80,000VA / 64kW / 64,000 watt SmartOnline Modular 3-Phase Intelligent UPS provides 100% system
availability
Scalable, modular N+1 configurations support hot-swap replacement of any of the four self-contained 20kVA power modules while connected equipment
remains powered
Two open slots accommodate up to two additional 20kVA power modules for increased capacity up to 120kVA
Parallel applications enable the connection of 2, 3 or 4 SU80KX2 models in parallel to enable advanced configurations for fail-safe redundancy, increased
capacity and combinations of the two (all parallel installations must be performed by a Tripp Lite authorized technician)
Highlights
80kVA / 80,000VA / 64,000W
on-line double-conversion 3
phase UPS
3 phase 220/380V, 230/400V,
240/415V 4-wire + ground wye
input & output
Scalable design grows as your
datacenter grows
Modular N+1 redundant
architecture helps assure 100%
availability
Parallel up to 4 UPS systems for
redundancy or increased capacity
IGBT & DSP technology produce
<4% input harmonic distiortion
(THDi)
Hot swappable power modules,
Expandable runtime
Package Includes
SU80KX2 UPS System
PowerAlert Software
Parallel communication cable
Instruction manual
Warranty information
1 / 5
capacity and combinations of the two (all parallel installations must be performed by a Tripp Lite authorized technician)
Full-time sine wave output with less than 3% output THD
High input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology produce low input THD (THDi)
Less than 4% input THD (THDi) reduces installation costs by allowing 1:1 generator sizing
Extremely efficient operation (up to 97%) saves energy and reduces BTU output
Maintains continuous operation with zero transfer time through blackouts, voltage fluctuations and surges
Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
Wide input voltage correction range: 173-300V / 276-477V AC
Precision +/-1% output voltage regulation
4 available battery modules (BP480V55, BP480V78, BP480V103 and BP480V140) are housed in a separate, stand-alone hardwired external battery
compartment (Battery modules sold separately)
Front panel combination LCD/LED display includes a real-time event log screen with up to 500 events listed
Dynamic battery management screen optimizes battery function to lengthen service life and allow cold restart of the UPS
Built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server
Accessory slot accepts an optional internal SNMPWEBCARD and MODBUSCARD accessory options
Emergency Power Off button turns UPS output OFF and disables Bypass output
Built-in Emergency Power Off (EPO) dry-contact interface supports remote emergency shutdown in large facilities
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 80000
Output kVA capacity (kVA) 80
Output Watt Capacity (watts) 64000
Output kW capacity 64
Output power factor 0.8
Output Capacity Details Two open power module slots enable installation of up to two additional 20kVA power modules for increased
capacity to 120kVA (authorized technician required)
Crest Factor 3:1
Nominal Output Voltage(s)
Supported 220/380V; 230/400V; 240/415V; 3-Phase Wye
Nominal Voltage details Less than 3% output THD
Frequency compatibility 50 / 60 Hz
Output voltage regulation (line mode) +/- 1%
Output voltage regulation (Battery
mode) +/- 1%
Built-in UPS output receptacles Hardwire
Output AC waveform (AC mode) Pure Sine wave
Output AC waveform (battery mode) Pure Sine wave
2 / 5
INPUT
Rated input current (at maximum
load) 103A (220/380), 99A (230/400), 95A (240/415)
Nominal Input Voltage(s) Supported 220/380V (3ph wye); 230/400V (3ph wye); 240/415V (3ph wye)
Nominal input voltage description 3-Phase Wye, 4 wire (L1, L2, L3, N, G); Less than 4% input harmonic distortion (THDi)
UPS input connection type Hardwire
Phase 3-Phase
BATTERY
Expandable battery runtime Battery set sold separate
External battery pack compatibility BP480V55; BP480V78; BP480V103; BP480V140
Expandable runtime description External battery pack wiring is contractor supplied
DC system voltage (VDC) +/- 240
Battery replacement description Hot-swappable, replaceable batteries
VOLTAGE REGULATION
Voltage regulation description Online, double-conversion power conditioning
Overvoltage correction Maintains continuous operation without using battery power during overvoltages to 276-477 (3-phase, 4-wire, wye),
reducing output within 1% of nominal
Undervoltage correction Maintains continuous operation without using battery power during brownout/undervoltage conditions to 173-300
(3-phase, 4-wire, wye)
LEDS ALARMS & SWITCHES
LED Indicators 4-LED Display: Displays normal AC input, on battery power, bypass input and fault conditions
Alarms Alarms signal a variety of operational conditions: low-battery, overload, shutdown, bypass and more
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch
Switches
ON button turns UPS inverter on. OFF button turns UPS inverter off. LCD Display Control Buttons browse through
and select items displayed on LCD screen. EPO (Emergency Power Off) button turns UPS output off and disables
Bypass output
SURGE / NOISE SUPPRESSION
EMI / RFI AC noise suppression Yes
AC suppression joule rating 5960
AC suppression response time Instantaneous
PHYSICAL
Installation form factors supported
with included accessories Tower
Primary form factor Tower
3 / 5
UPS / Power Module dimensions in
primary form factor (height x width x
depth / inches)
66.8 x 20.5 x 38.4
UPS / Power Module dimensions in
primary form factor (height x width x
depth / cm)
169.7 x 52.1 x 97.5
UPS / Power Module weight (lbs) 703
UPS / Power Module weight (kg) 319
UPS Shipping dimensions (height x
width x depth / inches) 76.1 x 28.5 x 48.2
UPS Shipping dimensions (height x
width x depth / cm) 193.3 x 193.3 x 122.4
Shipping weight (lbs) 907.4
Shipping weight (kg) 411.5
Cooling method Fans
UPS housing material Steel
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full load) 14016
COMMUNICATIONS
Communications interface DB9 Serial; Slot for SNMP/Web interface
PowerAlert software Included
Communications cable DB9 cabling included
LINE / BATTERY TRANSFER
Transfer time No transfer time (0 ms.) in online, double-conversion mode
Low voltage transfer to battery
power (setpoint)
Maintains continuous operation without using battery power during brownout/undervoltage conditions to 173-300V
AC (3-phase, 4-wire, wye). Below this point, output is maintained utilizing reserve battery power
High voltage transfer to battery
power (setpoint)
Maintains continuous operation without using battery power during overvoltages to 276-477V AC (3-phase, 4-wire,
wye), reducing output within 1% of nominal. Above this point, output is maintained utilizing reserve battery power
SPECIAL FEATURES
Cold Start (startup in battery mode
during a power failure) Cold-start operation supported
High availability UPS features Automatic inverter bypass; Hot swappable batteries
Green & high efficiency features High efficiency economy mode operation; Schedulable daily hours of economy mode operation
4 / 5
CERTIFICATIONS
UPS Certifications CE
WARRANTY
Product Warranty Period
(International) 2-year limited warranty
Product Warranty Period (Mexico) 2-year limited warranty
Product Warranty Period (Puerto
Rico) 2-year limited warranty
Related Items
Optional Products
Model Number Description Qty.
BP480V55 External Battery Pack for Select 3-Phase UPS Systems 1
BP480V78 External Battery Pack for Select 3-Phase UPS Systems 1
BP480V103 External Battery Pack for Select 3-Phase UPS Systems 1
BP480V140 External Battery Pack for Select 3-Phase UPS Systems 1
SNMPWEBCARD For remote monitoring and control via SNMP, Web or Telnet 1
ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires UPS with SNMPWEBCARD,
monitored PDU or switched PDU.) 1
MODBUSCARD For remote monitoring and control via MODBUS protocol 1
SU80KMBPKX 3 Breaker Maintenance Bypass Panel for SU80KX and SU80KTV 1
SUPC2MBP80KX 3-Breaker Parallel Tie Cabinet with Maintenance Bypass Switch (for SU80KX 3-Phase UPS) 1
SU20KSPM Hot swappable 20kVA replacement power supply for select Tripp Lite 3 Phase UPS Systems 1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at:
http://www.tripplite.com/sku/SU80KX2.
© 2014 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
5 / 5
Inhaltsverzeichnis
Andere Tripp Lite UPS Handbücher
Tripp Lite
Tripp Lite SmartPro Rackmount SMX1000RT2U Konfigurationshandbuch
Tripp Lite
Tripp Lite Audio/Video Pure Sine Wave UPS System Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline Intelligent True On-Line UPS... Montage- und Bedienungsanleitung
Tripp Lite
Tripp Lite SM550UNAFTA Bedienungsanleitung
Tripp Lite
Tripp Lite SMART2200RM2UN Konfigurationshandbuch
Tripp Lite
Tripp Lite SmartOnline SU2200RTXL2UA Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU3000RTXL3UHV Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU20KX Bedienungsanleitung
Tripp Lite
Tripp Lite Internet Office 700 Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU60K Bedienungsanleitung
Tripp Lite
Tripp Lite OmniPro 675 Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU2200XL Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline 2-9USTAND Bedienungsanleitung
Tripp Lite
Tripp Lite TE Series Bedienungsanleitung
Tripp Lite
Tripp Lite OmniSmart OMNISMART1050 Bedienungsanleitung
Tripp Lite
Tripp Lite UPS System AVRX550U Bedienungsanleitung
Tripp Lite
Tripp Lite AGBC5755 Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro AGSM152DRTi2U Bedienungsanleitung
Tripp Lite
Tripp Lite Smart Pro 450 RT Bedienungsanleitung
Tripp Lite
Tripp Lite SMART3000CRMXL Bedienungsanleitung
Beliebte UPS Handbücher anderer Marken
Pylontech
Pylontech Victron & Pylontech US5000 Bedienungsanleitung
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung
Mecer
Mecer ME-1000-WTU Bedienungsanleitung
Mustek
Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch
Emerson
Emerson Liebert NXL series Bedienungsanleitung
MAKELSAN
MAKELSAN BOXER SERIES Bedienungsanleitung
