TritonWear Triton 2 Bedienungsanleitung
User Manual
Triton 2
October 2019
Version 2.0
Copyright © 2019 by TritonWear
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in
any form or by any means, including photocopying, recording, or other electronic or mechanical
methods, without the prior written permission of the publisher. For permission requests, write to
the publisher, addressed “Attention: Permissions Coordinator,” at the address below.
TritonWear
2480 Cawthra Road Unit 16 Mississauga, ON L5A2X2
www.tritonwear.com [email protected]
Document Revisions
Date
Version Number
Document Changes
23-09-2019
1.0
Initial draft
Approvals
This document requires the following approvals:
Name
Title
Tristan Lehari
Co-founder & CEO
Darius Gai
Co-founder & COO
1
Table of Contents
PREFACE 4
Description of the User 4
Explanation of Safety Warnings 4
Packaging Information 4
Packaging contents 4
Obtaining Documentation and Information 5
Internet 5
Documentation Feedback 5
Triton 2 Description 5
Purpose of the Triton 2 5
Product elements 5
Understanding the user interface 6
LED Lights 6
Interpreting the light colours 6
OPERATION / USE 7
How to Use the System 7
Starting a Workout 7
Triton 2 Button Functions 7
Incorporating a Motion Analysis recording 8
Capturing Rate of Perceived Exertion (RPE) 8
Checks before and during use 8
Positioning The Unit 8
Supported and Unsupported Activities 9
MAINTENANCE 9
How to Maintain the Triton 2 9
Storing the device 9
Charging the battery 10
Planned physical device maintenance 10
How to Maintain the Firmware 10
Identifying if an update is required 10
Updating firmware 10
Regulatory and Safety Information 11
Product Safety 11
Safety information related to the intended use and reasonably foreseeable misuse; 11
Product limitations and restrictions 11
2
Triton 2 User Manual
1. PREFACE
1.1. Description of the User
The Triton 2 platform is intended for both on deck and in water users utilizing it to improve
swimming performance. No specialized skills are required.
On deck uses will begin and end each tracked session, and evaluate performance both during
and after training sessions, to make informed training decisions on behalf of the in-water users
they work with, be it themselves or person(s) they coach.
In-water users will wear the Triton 2 unit while swimming, and access their profile post-practice
to review performance. If this user swims without anyone monitoring training sessions, they will
also be responsible for beginning and ending each tracked session.
1.2. Explanation of Safety Warnings
DANGER!
Danger indicates a hazard with a high level of risk which, if not avoided, will result in death or
serious injury
WARNING!
Warning indicates a hazard with a medium level of risk which, if not avoided, could result in
death or serious injury.
CAUTION!
Caution indicates a hazard with a low level of risk which, if not avoided, will not result in injury
but could impact performance of the hardware.
1.3. Packaging Information
1.3.1. Packaging contents
Each TritonWear shipment contains
●One (1) Triton 2 device
●One (1) charging cable
●One (1) user manual
4
Triton 2 User Manual
1.4. Obtaining Documentation and Information
1.4.1. Internet
The latest version of all documentation is available at the following address:
https://www.support.tritonwear.com
https://www.tritonwear.com/userguide
1.4.2. Documentation Feedback
If you are reading TritonWear product documentation on the internet, any comments can be
submitted on the help center website. Comments can also be sent to [email protected].
We appreciate your comments.
2. Triton 2 Description
2.1. Purpose of the Triton 2
There are 3 components:
●The Triton 2 unit: The wearable device used to collect swimming data
●TritonWear app: Software used to track training live in practice, review datasets
post-workout, and manage the profile and organization for each user.
●TritonWear Headbands: Fabric band to secure the Triton 2 unit in place if a user prefers
not to wear a swim cap. These are available for purchase separately.
2.2. Product elements
5
Triton 2 User Manual
2.3. Understanding the user interface
a. Firmware - The code installed directly on the Triton 2 which enables it to collect and
calculate metrics during live training.
b. Software - The TritonWear application, available on all android and iOS mobile and
tablet devices, as well as limited functionality in a browser version.
c. Intellectual Property - All algorithms, designs, calculations and visualizations of user
data within our software, as well as the designs and procedures that go into
manufacturing of our Triton 2 devices.
2.4. LED Lights
2.4.1. Interpreting the light colours
Colour
Meaning
User Action
No Colour
Unit off in a sleep state.
Press button to turn on if
desired.
Red (blinking)
Device On, charging, and plugged
into power source.
Unit charging, leave plugged in
until blinking stops and unit is
fully charged.
Red (solid)
Device On, fully charged, and
plugged into power source.
Unplug device when desired -
fully charged and ready for use.
6
Triton 2 User Manual
Blue
Device On, hasn’t received
command to start workout.
Open TritonWear app and begin
a workout.
Green
Device On, In Workout.
Continue training!
Yellow
Device On, In Workout, Metric has
been generated but not yet sent
out via BT.
Wait for sync or move closer to
mobile device, turn it on and
open app. Device should send
data automatically.
Purple
Firmware upgrade in process.
Leave unit on until upgrade
complete.
Base color /
Red
interchange
Device on, low battery.
Charge unit immediately.
3. OPERATION / USE
3.1. How to Use the System
3.1.1. Starting a Workout
Starting a workout requires an android or iOS powered mobile device or tablet, with the
TritonWear application installed, as well as a Triton 2 unit. To start the workout, simply power
on the Triton 2 unit, and follow the in app instructions to start a workout. For more on this visit
tritonwear.com/support/start-a-workout.
3.1.2. Triton 2 Button Functions
The button, located on the back of the unit, serves 3 distinct functions:
●Power on - press and release the button, the LED on the front of the unit will turn on
when the unit has been successfully turned on
●Power down - press and release the button again, the LED will turn off when the unit
has been successfully powered down
7
Triton 2 User Manual
●Hard reset - if for some reason the unit requires a communication reset with the app,
pressing and holding the power button for 8 seconds will reset the unit, enabling it to
reconnect to the app.
3.1.3. Incorporating a Motion Analysis recording
While running a workout on TritonWear, each profile purchased to include Motion Analysis will
have the ability to record video tied to the acceleration data.
3.1.4. Capturing Rate of Perceived Exertion (RPE)
If chosen to be enabled, each athlete will be required to input a value between 0-10 after each
practice indicating how taxing the session felt on that day. This is ideally completed within 30
minutes of practice. For more on this please see tritonwear.com/support/how-to-enter-rpe
3.2. Checks before and during use
3.2.1. Positioning The Unit
The location of the Triton unit affects the metrics that are generated. To ensure you get the
most accurate metrics, the Triton units should be:
●Pitched back slightly, just below the curve of the head
●Facing straight up (LED lights at the bottom and aligned vertically)
●At the centre back of the head
8
Triton 2 User Manual
3.2.2. Supported and Unsupported Activities
Major Stroke Types:
Butterfly
Backstroke
Breaststroke
Freestyle
Individual Medley (IM)* - only on a rep level, cannot be recognized per length
Mixed - only on a rep level, cannot be recognized per length
Kick Sets - only after the first length of swimmer is recorded
Start Conditions:
Push-off
Dive
The following unsupported activities will still record data, however it may not be as accurate
due to the nature of the movements involved.
Unsupported Activities
Switching strokes mid-length
One-arm butterfly
Drills
Swimming partial lengths
Equipment
Ending on a turn
4. MAINTENANCE
NOTICE: It is important to ensure the charging area is clean and dry prior to connecting the
charging cable
4.1. How to Maintain the Triton 2
4.1.1. Storing the device
Because the Triton 2 is used in either chlorinated or salt water pools, please be sure to wipe
them dry before storing to prevent any buildup occurring on or around the charging port. For
long term storage ensure they are completely dry but do not store the in moisture reducing
9
Inhaltsverzeichnis
