Trust ICS-2000 Einrichtungshandbuch
www.trust.com
ICS-2000
OCTOPUS CONTROL STATION
ONLINE MANUAL
Item 71110 Version 1.0
Visit www.trust.com
for the latest instructions
ICS-2000 INTERNET CONTROL STATION
3
Index
1.1 Add a room 7
1.2 Edit/Delete room 8
2.1 Connect a new device 9
2.2 Connect an existing device (Clone) 12
2.3 Edit/Delete device 13
3.1 Add scenes 14
3.2 Add/Delete actions 15
3.3 Add/Delete delays 16
4.1 Configure timers 17
4.2 Edit/Delete timer 20
5.1 Configure rules 21
5.2 Edit/Delete rule 24
6.0 Connect manually 25
ICS-2000 INTERNET CONTROL STATION
4
ICS-2000 INTERNET CONTROL STATION
5
COMPATIBILITY
This product works with all Trust Smart Home
transmitters and receivers.
FUNCTIONALITY
The ideal solution to wirelessly control and monitor
your home for ultimate comfort and security
WIRELESS RADIO SIGNAL
• The 433.92 MHz radio signal passes through walls, windows and doors.
• Indoor 433.92 MHz range: up to 30 m. Outdoor 433.92 MHz range: up to 70 m (optimal conditions).
• The 868 MHz radio signal passes through walls, windows and doors.
• Indoor 868 MHz range: up to 70 m. Outdoor 868 MHz range: up to 120 m (optimal conditions).
• The Zigbee radio signal passes through walls, windows and doors.
• Indoor Zigbee range: up to 30 m. Outdoor Zigbee range: up to 70 m (optimal conditions).
• The range is dependent on local conditions, such as the presence of metals. For example, the thin
metal coating in Low-emissivity (Low-E) glass can have a negative impact on the range of radio
signals.
• There may be restrictions on the use of this device outside the EU. If applicable, check whether this
device complies with local directives.
• This class 1 wireless device meets the essential requirements and other relevant conditions of
R&TTE Directive 1999/5/EC. Be careful when using wireless devices if you have a pacemaker or are
dependent on other life-saving, sensitive electronic equipment, because this device transmits radio
signals.
Read the manual carefully. Failure to follow these instructions can be dangerous.
Incorrect installation will void any warranty on this product.
For safety & liability information visit www.trust.com/safety
ICS-2000 INTERNET CONTROL STATION
6
LIFE SUPPORT
Never use Trust Smarthome products for life
support systems or other applications where
failures can have life-threatening consequences.
REPAIRS
Do not try to repair this product yourself.
The device contains no serviceable parts for the
user.
WATER-RESISTANT
This product is not water-resistant.
CLEANING
Clean this product with a dry cloth.
Do not use harsh chemicals, cleaning solvents or
strong detergents.
HANDLING
Do not drop the device, bump the device
against something or shake it. Rough handling
can damage internal circuit boards and fine
mechanics.
ENVIRONMENT
The product should not be exposed to extreme
heat or cold. This can damage the circuit boards
and batteries or shorten its life.
ICS-2000 INTERNET CONTROL STATION
7
1.1
A
1.1 Add a room
APress the + button at the top of the screen to add a new room
BFill in a name for the room you want to add.
CPress the ADD button to save the new room
B
C
ICS-2000 INTERNET CONTROL STATION
8
1.2
1.2 Edit/Delete room
A
B
C
ATo edit the name of a room press the pencil button at the top of the screen
BPress on the room name to begin editing.
CWhen you are done editing the name press the CONFIRM button.
DTo delete a room press the DELETE button in front of the room when in editing mode. Press the
CONFIRM button to go back to the room overview.
D
ICS-2000 INTERNET CONTROL STATION
9
2.1 Connect a new device
APress on a room name to open it.
BPress the + button at the top of the screen to add a new device.
CEnter a name for the device you want to add
DPress ADD
A
B
C
D
2.1
ICS-2000 INTERNET CONTROL STATION
10
ESelect the type of device you want to add to your room.
If you already control your Trust Smart Home receiver with a remote control or wall switch
continue to step 2.2. (Only for Startline products)
FPut your receiver in connect/learn mode. (Read the manual of the receiver on how to put it in connect/
learn mode).
GWhen the receiver is in connect/learn mode press CONNECT.
E
1 sec.
F
F
G
Andere Handbücher für ICS-2000
2
Inhaltsverzeichnis
Andere Trust Steuerungssystem Handbücher
