Trust 740C POWERC@M ZOOM Bedienungsanleitung

740C POWERC@M ZOOM

L I F E I S M O R E ! T R U S T U S T R U S T . C O M

User’s manual

Version 1.0

740C POWERC@M ZOOM

Thank you for your purchase. Register your product via our Internet site at

www.trust.com/register, so that you will be eligible for optimal guarantee and service support.

You will also be automatically informed of the development of your and other Trust products. UK

L I F E I S M O R E ! T R U S T U S T R U S T . C O M

740C POWERC@M ZOOM

L I F E I S M O R E ! T R U S T U S T R U S T . C O M

Fig. 1 Fig. 2

Fig. 3

Fig. 4 Fig. 5

Fig. 6 Fig. 7

740C POWERC@M ZOOM

Fig. 8 Fig. 9

L I F E I S M O R E ! T R U S T U S T R U S T . C O M

Fig. 10 Fig. 11

TRUST 740C POWERC@M ZOOM

Use the Quick Installation Guide when using the camera for the first time. This guide

contains the basic instructions you will need to know in order to be able to use this

camera.

1 Introduction

This manual is intended for the users of the ‘TRUST 740C POWERC@M ZOOM ‘

The TRUST 740C POWERC@M ZOOM can be used for taking photographs, making

a video and as a web camera for video conferences on the internet

The camera can also operate on Mac OS.9.x and 10.1 or higher as a mass storage

device.

2 General comments regarding photography

Test photograph

Before you start photographing a particular event it is a good idea to take a number

of test photographs first so that you are sure the camera is working properly.

No compensation for unsuccessful photographs

No compensation may be claimed for unsuccessful photographs as a result of a

faulty camera, faulty software, etc.

Exchanging photographs and video clips

No guarantees are given that photographs and video clips produced with this camera

can be displayed on other devices or that photographs and video clips produced with

other devices can be displayed using this camera.

Sunlight

Do not aim the camera directly at the sun for a long period of time.

Shaking/knocks

Do not shake the camera or knock it against anything. This can cause problems,

failed pictures, incompatibility of the memory or loss of picture data and memory.

LCD display

There may sometimes be small black or clear dots visible on the LCD screen. This is

normal and does not affect the photographs. There is no reason to exchange the

camera if there are 10 dots or less.

Exposing the LCD screen to direct sunlight for a long period of time may cause faults.

Lens

Keep the glass of the lens clean. Use a cotton bud to clean the lens. If necessary,

use special cleaning fluid for camera lenses. Camera cleaning fluid can be purchased

from photography shops. Do not use a different type of cleaning product.

TRUST 740C POWERC@M ZOOM

3 Safety

3.1 General

Carefully read the following instructions before use.

• The Trust 740C PowerC@m Zoom does not require any special maintenance.

Use a moist soft cloth to clean the outside of the camera.

• Do not use aggressive substances, such as petrol or white spirit, to clean the

camera. These may harm the material it is made from.

• Never immerse the camera in a fluid. This may be dangerous and will damage

the product. Do not use the camera in the direct vicinity of water.

• Do not repair this camera yourself.

3.2 Batteries

• The alkaline batteries supplied are not rechargeable. Do not try to recharge

them. This can give rise to danger of an explosion.

• Never throw the batteries onto an open fire. The batteries may explode.

• Never drill holes in the batteries.

• Keep the batteries out of reach of small children.

• Only use AAA alkaline batteries with this camera. Rechargeable AAA batteries

type NiMH (minimum 700 mAh) can also be used,

• When the alkaline batteries are flat, ask your local authority where you can

dispose of them.

N.B.: Do not use old and new batteries at the same time, because the old

batteries may deplete the new ones.

N.B.: if the camera is not to be used for a long time remove the batteries. This

will help to increase the lifetime of the batteries.

4 Approval

This device conforms with the essential requirements and other relevant provisions of

the applicable European directives. The Declaration of Conformity (DoC) can be

consulted on www.trust.com/13902/ce.

TRUST 740C POWERC@M ZOOM

USING FOR THE FIRST TIME

This section is intended as an introduction to the camera and describes how

photographs are taken, how these can be viewed on the camera and how they can

be saved on the computer. UK

Also consult the Quick Installation Guide supplied!

5 Getting ready for use

5.1 Attaching the wrist strap

You can attach the wrist strap to the camera for optimal ease of use and safety.

1. Insert the thin end of the wrist strap through the eye (5, Figure 1).

2. Make a loop from the part of the wrist strap that has been inserted through the

eye.

3. Thread the other end of the wrist strap through the loop.

5.2 Inserting the batteries

Follow the steps given in the Quick Installation Guide

Note You can also use rechargeable AAA type NiMH batteries (minimum

700 mAh) in the Trust 740C PowerC@m Zoom. Do not use NiCd

batteries.

5.3 Tripod

The stand supplied with the camera can be used to keep the camera stable. It is

recommended that the tripod is used when using the self timer, if there is not much

light or if it is being used as a webcam.

1. Screw the stand into place on the bottom of the camera.

2. Unfold the feet, unlock the stand using the handle and place the camera in

the desired position.

3. Lock the stand by placing the handle back in the original position.

6 Taking a photograph.

1. To switch the camera on hold the on/off button (2, Figure 1) pressed in until

you hear a signal. If the camera does not react check that the batteries are

positioned correctly and are not flat.

2. Look at the picture on the LCD screen and focus on it as required.

3. Press the shutter button (1, Figure 1). You will hear a sound and the photo is

taken. The LCD screen will be turned off.

4. Keep the camera pointed at the subject and wait for the second sound.

The photo has now been taken. This will be saved. This takes a maximum of

another 5 seconds. When the LCD screen lights up again the camera is ready

to take the next picture.

TRUST 740C POWERC@M ZOOM

N.B.: The camera will turn off automatically if it has not been used for 1 minute.

This is to save the batteries. It is not possible to alter this time.

Tip: It is possible to take photos with this camera when there is less light than

is possible with other cameras. However, when there is very little light

more graining will be seen in the photos than normal. Use the flash or

move to a position where there is more light.

7 Viewing pictures taken

1. Switch on your camera.

2. Press the ENTER button (12, Figure 2) briefly. The screen will display the last

picture taken. If no pictures have been taken this will be displayed.

3. Use the keys up/down (11/13 Figure 2) to view the previous/next picture.

4. Press the ENTER button again to return to picture taking mode.

8 Installing the camera

Windows 98, ME, 2000, XP: First install the driver program. -> Section 8.1

Mac OS 9.2 or a later release: see section 19

8.1 Installing the driver (Windows 98, Windows ME,

Windows 2000 or Windows XP)

Follow the steps given in the Quick Installation Guide

N.B.: Make sure all other programs are closed during the installation.

N.B.: In the example, ‘D:/’ is used to indicate the CD-ROM drive. This may be

different for your computer.

Tip: The latest drivers can be downloaded from www.trust.com/13902. Check

whether a new driver is available and use this for the installation.

Tip: You do not have to install the driver programmes if you are using

Windows ME, 2000 or XP and you do not wish to use the PC camera

mode.

8.2 Connecting the camera to the USB computer port.

N.B.: Make sure the driver has been installed in Windows before connecting the

camera.

N.B.: The camera must be switched on before connecting the cable.

The installation will not be carried out properly if the camera is

connected before it is switched on.

1. Switch on your camera.

2. Connect one end of the USB cable to the camera (7, Figure 1 and Figure 4).

3. Connect the other end of the USB cable to the computer.

Windows: new hardware will be found and installed automatically.

4. See the Quick Installation Guide for instructions on how to view your photos.

TRUST 740C POWERC@M ZOOM

Operation of the camera for advanced users

9 Description

This section gives a description of the functions of the various buttons and the

information displayed on the LCD screen.

See Figure 1 and Table 1 for a description of the various functions on the front of

the camera.

Subject Name Description

1 Shutter

Press this button to take photographs or to start

and stop recording a short video clip.

2 On/Off

Button

Press this button to turn the camera on.

Pressing once more switches it off again.

Note: The camera turns off automatically if it

has not been used for approximately 1

minute.

3 Flash Use the built-in flash to give the subject extra

lighting if it is in dark surroundings.

4 Optical

Viewfinder

To focus on the subject. This can also be done

via the LCD screen.

5 Wrist strap

fixing point

Eye for fixing the wrist strap to the camera.

6 Lens Records the image to be taken.

Note: Keep the lens clean. Dirt and fingerprints

affect the result.

7 Digital

connections

There are 2 connections on the left-hand side

of the camera, namely a video-out connection

and a USB port.

Video-out: connection for connecting the

camera to a TV or video recorder in order to

view the photographs and video clips on a TV.

USB: connection for connecting the camera to

the USB port of a computer. This connection,

allows you to save photographs and video clips

on a computer or use the camera as a webcam

to chat on the Internet.

Table 1: Functions on the front of the camera

TRUST 740C POWERC@M ZOOM

See figure 2 and Table 2 below for a description of the various functions at the back

of the camera.

Subject Name Description

8 Status

indicator

When the indicator is flashing, the camera is

busy and cannot be used at that moment. See

section 9.2.

9 Menu button Pressing this shows the menu which allows the

settings to be changed.

10 Display

mode button

This button can be used to select which options

you wish to have visible on the LCD screen.

See section 10.3.

11 Up key

When recording: press this to zoom in on the

image.

When displaying: shows the previous picture.

In the menu: step upwards.

12 ENTER key

When recording: press this to switch to

display.

When displaying photo: switch to display.

When displaying video: press briefly: begin to

play. Press for a longer time: switch to display.

In the menu: Save the setting selected.

13 Down key

When recording: press this to zoom out.

When displaying: shows the next picture.

In the menu: step down.

14 LCD display The (TFT) LCD screen allows you to:

view the subject to be photographed (Preview),

view photographs and video clips, view the

camera settings and call up the camera menu

and make settings.

See section 9.1 for a more detailed description

of the LCD screen.

Table 2: Functions at the rear of the camera

See Figure 3 and Table 3 below for a description of the various functions at the back

of the camera.

15 Battery cover The batteries are located behind this cover.

16 Memory slot Position for optional MMC or SD memory card

in order to be able to save more pictures.

Table 3: functions on the side of the camera

Inhaltsverzeichnis

Andere Trust Digitalkamera Handbücher

Trust

Trust 782AV Bedienungsanleitung

Trust

Trust 735S POWERCAM ZOOM Bedienungsanleitung

Trust

Trust 735 Powercam Zoom Bedienungsanleitung

Trust

Trust 1490Z Bedienungsanleitung

Trust

Trust PowerCam Mini DC-3500 Bedienungsanleitung

Trust

Trust PowerCam Optical Zoom 970Z Bedienungsanleitung

Trust

Trust 350FS POWERC@M FLASH Bedienungsanleitung

Trust

Trust FlexCam Bedienungsanleitung

Trust

Trust DC-4700 POWERCAM OPTICAL ZOOM Bedienungsanleitung

Trust

Trust 750 LCD POWERC@M ZOOM Bedienungsanleitung

Trust

Trust FAMILYC@M 300 DIGITAL MOVIE Bedienungsanleitung

Trust

Trust 735 POWERC@M ZOOM Bedienungsanleitung

Trust

Trust SPYC@M 300 Bedienungsanleitung

Trust

Trust FAMILYCAM 300 Bedienungsanleitung

Trust

Trust FAMILYC@M 500 FLASH Handbuch

Trust

Trust PowerCam Zoom 920 Bedienungsanleitung

Trust

Trust 913 POWERC@M ZOOM Bedienungsanleitung

Trust

Trust POWERCAM VIDEO DV-2400V Bedienungsanleitung

Trust

Trust 735S POWERCAM ZOOM Bedienungsanleitung

Trust

Trust PHOTOCAM LCD 2300 Bedienungs- und Wartungsanleitung

Trust

Trust POWERCAM CCD 960 Bedienungsanleitung

Trust

Trust 610 Bedienungsanleitung

Trust

Trust FAMILYCAM 510FX Bedienungsanleitung

Trust

Trust 500F SPYC@M FLASH Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung