Operator’s Manual
Disk woodchipper
1 INFORMATION ABOUT THE MANUAL
This manual must be considered an integral part of the machine and must be
handed over with it in the case of resale until the scrapping.
In case of damage or loss, this manual must be replaced by asking the
manufacturer or the seller for a new copy.
The labels on the machine must remain visible at all times by the operator. They
must replace them when they are not clearly visible anymore.
The EC Certificate of Conformity is enclosed in this manual.
Some devices described in the manual may not be present in the machine
because of the chosen use of the machine and the market to which the machine is
destined.
This manual consists of 54 pages.
1.1 MANUAL UPDATING
The information, the descriptions and the pictures of this manual reflect the state of
the machine at the moment it is marketed.
The Manufacturer has the right to make any modification to the machine for
technical or commercial reasons at any moment. These modifications do not
require the Manufacturer to change the vehicles they produce and does not make
this publication unsuitable.
The manufacturer might consider to add parts to the manual in future. In that case
the additions will build on this manual.
1.2 COPYRIGHT OF THE MANUAL
The copyright of this manual belongs to the manufacturer of the machine.
This manual contains technical texts, images and pictures, which cannot be
published or conveyed to third parties -completely or in part- without the written
consent of the manufacturer.
The presence of this sign indicates to pay the highest attention to
the subject
