TSC TTP-244ME Plus series Bedienungsanleitung

TTP-244ME Plus / 342M Plus

THERMAL TRANSFER / DIRECT THERMAL

BAR CODE PRINTER

USER’S

MANUAL

CONTENTS

1. PRODUCT INTRODUCTION..........................................................1

1.1 Compliances..................................................................................................... 1

2. GETTING STARTED ......................................................................3

2.1 Unpacking and Inspection............................................................................ 3

2.2 Equipment Checklist..................................................................................... 3

2.3 Printer Parts ................................................................................................. 4

2.4 Buttons and Indicators.................................................................................. 7

3. SET UP...........................................................................................9

3.1 Setting Up the Printer................................................................................... 9

3.2 Loading Label Stock..................................................................................... 9

3.3 Self-Peeling Function................................................................................. 12

3.4 Cutter Function........................................................................................... 14

3.5 Ribbon Loading Instructions....................................................................... 15

3.6 Self Test..................................................................................................... 18

3.7 Dump Mode................................................................................................ 20

4. USING THE PRINTER..................................................................21

4.1 Power-on Utilities ....................................................................................... 21

4.1.1 Self Test Utility.................................................................................... 21

4.1.2 Gap Sensor Calibration Utility............................................................. 21

4.1.3 Printer Initialization.............................................................................. 22

4.2 Troubleshooting Guide............................................................................... 23

APPENDIX A MENU CONTROL FLOWCHART....................................1

1. PRODUCT INTRODUCTION

Thank you very much for purchasing this bar code printer. The attractive printer

delivers superior performance at an economical price. Both powerful and easy-to-

use, this printer is your best choice.

The printer offers both thermal transfer and direct thermal printing at user

selectable speeds: either 1.5, 2.0, 3.0 and 4.0 IPS (Inch Per Second) for 203 DPI

model; 1.0, 1.5 and 2.0 IPS for 300 DPI model. It can accept a wide range of

media, including roll feed, die-cut, and fan-fold labels for both thermal transfer

and direct thermal printing. All of the most frequently used bar code formats are

available. Fonts and bar codes can be printed in any one of the four directions.

This printer provides a choice of five different sizes of alphanumeric fonts. By

using font multiplication, an even greater range of sizes is possible. Smooth fonts

can be down-loaded from the user friendly, Windows labeling software. In

addition, this printer is capable of independently executing BASIC programming

functions, including arithmetic, logical operation, loop, flow-control and file

management, among others. This programming capability provides the greatest

efficiency in label printing. The status of printer and error messages can be

displayed on the LCD screen. Unlike its predecessors, this model features an

LCD screen to facilitate the operation of the printer. This new feature enables the

user to view printer status or set printing parameters directly on the printer unit in

English, Chinese, Japanese, Italian…etc., making interfacing with the printer all

the more simple and viable!

1.1 Compliances

CE:

EN55022:1998+A1: 2000+A2: 2003, Class A

EN55024: 1998+A1: 2001+A2: 2003 IEC 61000-4 Series

EN61000-3-2: 2000 & EN61000-3-3: 1995+A1: 2001

UL/CUL:

UL1950, File Number: 178707

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reason-able protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses and can radiate radio frequency energy, and if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which the user will be required to correct the

interference at his or her own expense.

TUV/ Safety:

EN60950, Certificate Number: AL990636129001

Wichtige Sicherheits-Hinweise

1. Bitte lesen Sie Diese Hinweis sorgfältig durch

2. Heben Sie diese Anleitung fűr den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromentz zu trennen. Verwenden Sie

Keine Flűssig-oder Aerosolreiniger. Am besten eignet sich ein angefeuchtetes

Tuch zur Reinigung.

4. Die Netzanschlußsteckdose soll nahe dem Gerät angebraucht und leicht

zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schűtzen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen

oder Fallen könnte Beschädigungen hervorrufen.

7. Beáchten Sie beim Anschlußan das stromnetz die Anschlußwerte.

8. Dieses das Gerät kann bis zu einer Außentemperatur von maximal 40℃

betieben werden.

CAUTION

1. HAZARDOUS MOVING PARTS IN CUTTER MODULE. KEEP FINGER AND OTHER

BODY PARTS AWAY.

2. THE MAIN BOARD INCLUDES REAL TIME CLOCK FEATURE HAS LITHIUM BATTERY

CR2032 INSTALLED. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE.

3. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER

INSTRUCTIONS.

2. GETTING STARTED

2.1 Unpacking and Inspection

This printer has been specially packaged to withstand damage in the shipping

process. However, for fear that unexpected damage might occur, upon receiving

the bar code printer, carefully inspect the package and the device. In case of

evident damage, contact the carrier directly to specify the nature and extent of

the damage. Please retain the packaging materials in case you need to reship

the printer.

2.2 Equipment Checklist

zBar code printer unit

zRibbon paper core

zRibbon supply/rewind spindle (2 pcs.)

zCentronics port cable

zPower cord

zSoftware/Windows driver CD disk

zQuick start guide

Separately purchased items may also be included. These additional items may

include:

zLabels

zRibbons

zMemory module

zCutter module

zStand-alone keyboard

If any parts are missing, please contact the Customer Service Department of

your purchased reseller or distributor.

2.3 Printer Parts

Figure 1. Top Front View

1. Cover Open/Release Handle

2. Label Dispense Opening

3. Backing Paper Opening

4. MENU Button

5. PAUSE/SELECT Button

6. FEED/SET Button

7. Error Indicator

8. On-line Indicator

9. Power Indicator

Figure 2 Interior View

1. Printer Cover (in open position)

2. Ribbon Rewind Spindle

3. Ribbon Supply Roll Spindle

4. Label Roll Guard

5. Label Supply Roll Spindle

6. Ribbon Mechanism

7. Carriage Release Lever

8. Front Panel

9. Peel Off Sensor

10. Backing Paper Opening

11. Peel-Off Sensor / Cutter Power Connector

3 2

Figure 3. Rear View

1. Label Insert Opening (for use with external labels)

2. Centronics Interface Connector

3. RS-232C DB-9 Interface Connector

4. Power On/Off Switch

5. AC Power Cord Socket

2.4 Buttons and Indicators

POWER Indicator

The green POWER indicator illuminates when the power switch is turned on.

ON-LINE Indicator

The green ON-LINE indicator illuminates when the printer is ready to print. When

the PAUSE button is pressed, the ON-LINE indicator flashes.

ERROR Indicator (Error/Paper Empty)

The red ERROR indicator illuminates in the event of a printer error, such as

paper empty, ribbon empty, out of memory, and so forth. For a full list of error

messages, please refer to Section 4.2, Troubleshooting Guide.

MENU Button

Provided with a built-in menu, the printer allows the user to directly set printing

parameters or view printer status on the LCD display panel. To enter the Menu

mode, press the MENU button. Press the button over again to proceed form one

menu item to another or to revert to the original Ready status. The menu is

comprised of these major items: Printer Info, File List, Memory Info, Date/Time,

and Printer Setup. Each of said items, in turn, is made up of a number of sub-

items, which can be selected by pressing the SELECT button, or viewed or set

by pressing the SET button. Refer to Appendix for the structure and operation

logic of the menu.

PAUSE/SELECT Button

This button combines two functions: PAUSE if the printer is in the Ready status,

or SELECT if in the Menu mode.

The PAUSE button allows the user to hold a print job and then resume the

printing with a second depression of the button. By pressing the PAUSE button:

(1) the printer stops at the completion of printing of the current label, (2) the

PAUSE LED flashes, and (3) the printer holds all data in memory. This allows for

trouble-free replacement of label stock and thermal transfer ribbon. A second

depression of the PAUSE button will restart the printer.

Note: If the PAUSE button is held down for more than 3 seconds, the

printer will be reset and all data of the previous printing job will be lost.

The SELECT button allows the user select for the sub-item to be processed.

Once the sub-item has been selected, the user can change its setting by press-

ing the SET button.

FEED/SET Button

As does the PAUSE/SELECT button, this button also has dual functions: FEED

and SET.

Press the FEED button for label to advance to the next print position.

Press the SET button to change parameter settings or view printer status on the

LCD screen.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TSC Barcode-Lesegerät Handbücher

TSC

TSC TTP-268M Bedienungsanleitung

TSC

TSC Alpha-2R Series Bedienungsanleitung

TSC

TSC TDP-643R Plus series Bedienungsanleitung

TSC

TSC TTP-225 Series Bedienungsanleitung

TSC

TSC TTP-244 Pro Series Bedienungsanleitung

TSC

TSC TTP-244 series Bedienungsanleitung

TSC

TSC TDP-225 Bedienungsanleitung

TSC

TSC TTP-244 series Bedienungsanleitung

TSC

TSC TTP-244 Pro Series Bedienungsanleitung

TSC

TSC TDM-20 Bedienungsanleitung

TSC

TSC TDP-225 Bedienungsanleitung

TSC

TSC Printronix MB240 Series Bedienungsanleitung

TSC

TSC Alpha-4L Series Bedienungsanleitung

TSC

TSC MX340P Series Bedienungsanleitung

TSC

TSC TTP-2410MU Series Bedienungsanleitung

TSC

TSC MH240 Bedienungsanleitung

TSC

TSC TTP 246M Bedienungsanleitung

TSC

TSC TTP-342ME Pro Bedienungsanleitung

TSC

TSC PEX-2000 Series Bedienungsanleitung

TSC

TSC TTP-245C series Bedienungsanleitung

TSC

TSC Alpha-30L Series Bedienungsanleitung

TSC

TSC TTP-245HR Bedienungsanleitung

TSC

TSC TTP-243 Series Bedienungsanleitung

TSC

TSC PRINTRONIX TX210 Series Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung