Turbolock YL-99 Bedienungsanleitung
USER MANUAL
Model: YL-99
TM
For more information, please visit:
www.turbolock.com
Customer Service: 855-850-8031
Table Of Contents
Section 1. Safety Warnings and Guidelines ............ 3
1.1 Disposal at End of Life .................................... 3
Section 2. Features & General Information............. 4
2.1 Features ....................................................... 4
2.2 General Information ....................................... 4
3.1 Battery Information ...................................... 5
2.2 Sound Information ....................................... 5
Section 3. Additional Information ......................... 5
Section 4. Master Code Information &
Instructions ........................................................ 6
4.1 General Master Code Information..................... 6
4.2 Changing The Master Code.............................. 6
Section 5. User Code Information & Instructions ..... 6
5.1 General User Code Information........................ 6
5.2 Setting The User Codes .................................. 7
5.3 Changing The User Codes ............................... 7
5.4 Deleting The User Codes
................................
8
Section 6. Passage Code Information &
Instructions .......................................................6
6.1 General Passage Code Information ..................6
6.2 Setting The Passage Code ..............................9
6.3 Deleting The Passage Code ............................9
6.4 Entering Passage Mode ................................10
6.5 Exiting Passage Mode ..................................10
Section 7. Resetting.........................................10
7.1 Soft Reset..................................................10
7.2 Hard Reset.................................................11
Section 8. Disguising Your Code ........................11
Section 9. Lock Components .............................12
Section 10. Install Instructions .........................13
Section 11. FAQ .............................................15
Section 12. Warranty Information .....................16
3
Section 1. Safety Warnings and Guidelines
It is important that you follow all instructions and regard all notes that appear throughout this
manual . Consult this manual before you attempt to use your TURBOLOCK YL-99 Digital Door Lock.
If you have questions not answered by this manual, contact TURBOLOCK customer service.
1.1 Disposal at End of Life
This product must not be disposed of by incineration, landfilling, or mixing with household trash.
Improper disposal of the battery contained within this product may result in the battery heating up,
rupturing, or igniting which may cause serious injury. The substances contained inside the battery
present chemical risks to the environment. The recommended disposal for any YL-99 at its end-
of-life is to dispose of the entire unit at or through an e-Waste recycling center, program, or facility.
Local regulations and laws pertaining to the recycling and disposal of lithium ion batteries and/or
products containing them will vary according to country, state, and local governments. You must
check laws and regulations corresponding to where you live in order to properly dispose of the
battery and/or unit. It is the user’s responsibility to dispose of their waste equipment properly with
accordance with local regulations and laws.
For additional information about where you should drop off your batteries and electrical or electronic
waste, please contact your local or regional waste-management office, your household waste disposal
service, or your point-of-sale.
4
Section 2. Features & General Information
2.1 Features
• Backlit keypad for use in low light environments
• Up to 10 code combinations, including: passage, user and master codes
• Passage Mode for hassle-free entry
• User-friendly instructions for DIY use
• An LED indicator lights up to show when codes and commands have been successfully entered
• Built-in disguise feature to protect your codes from prying eyes
• Low battery warning indication
2.2 General Information
The YL-99 electronic lock is capable of storing up to 10 codes: 1 master code, 1 passage code,
and 8 user codes. All codes are allocated a starting number or sequence number. The starting num-
bers are as follows, ‘0’ for the master code, ‘1-8’ for the user codes, and ‘9’ for the passage code. The
master code must be set up in order to input additional codes.
This user manual will guide you through the functions and installation of your YL-99. If you have
any questions or cannot find the information you need in the manual, please contact your place of
purchase or our customer service immediately. Before contacting customer service, please have your
model number and purchase information ready as any of these may be needed during the call.
5
Section 3. Additional Information
3.1 Battery Information
The lock requires four ‘AAA’ alkaline batteries which are housed in the internal handle. The lock has a low
battery indicator which, when unlocking the door, will sound a continuous beep followed by a single beep.
New batteries should be installed as soon as possible after receiving any low battery indication. When the
notification begins, the lock will only have enough power for approximately 50 times before the batteries
are fully depleted. Expected battery life is approximately 365 days with an estimate of 3000 uses per 365
days.
If the batteries are completely dead, you can use the included emergency backup battery pack to power
the lock. However, it is recommended not to continue use of the backup longer than necessary; ensure
that the batteries in the lock are replaced immediately. Please keep the emergency backup battery pack in
an accessible area at all times. In the event of a power failure, the battery pack will be needed to unlock
the lock.
It is highly recommended to insert the batteries only after the lock is fully installed.
6
• To unlock the lock with the master code for the first time, enter the code ‘0123’ and press the ‘#’
key. The lock will emit sound and the green indicator will light up. While sound emits, the lock is
unlocked and will return to the locked position immediately after the sound stops.
• Remember, the door should always be ajar when adding and/or changing codes.
4.2 Changing The Master Code
1. Enter the default (‘0123’) or the current master code, and press the ‘#’ key.
2. Wait until the beeping sound stops but the blue backlight remains on.
3. Enter a new master code starting with ‘0’ and press the ‘*’ key. The lock will emit two beeps to
confirm the code has been successfullysaved.
If the master code is lost or forgotten, it may be deleted via a hard reset of the lock. Refer to Section 7.
Section 5. User Code Information & Instructions
5.1 General User Code Information
The following Information applies to your YL-99’s user codes:
• All codes can be a maximum of 15 digits including the sequence number.
• The sequence number for the master code is ‘0’, therefore you must ensure this is the first digit of
your code. The remainder may be any combination of digits from ‘0-9’.
• The default master code is ‘0123’.
Section 4. Master Code Information & Instructions
4.1 General Master Code Information
The following information applies to your YL-99’s master code:
• The master code is the most important code in the series as it is needed to set up all other codes.
• All codes can be a maximum of 15 digits including the sequence number.
7
5.2 Setting The User Codes
Follow the instructions below to set a user code:
1. Enter the current master code and press the ‘#’ key.
2. Wait until the beeping sound stops and the blue backlight remains on.
3. Enter a new user code starting with its sequence number and press the ‘*’ key i.e. the first user
code should start with ‘1’, the second should start with ‘2’, and so on. The lock will emit two beeps to
4. If desired, repeat the steps above until all eight user codes ‘1-8’ have been successfully set
Each user code must be entered while the blue backlight is on. If the light goes out, you must re-enter
the master code to unlock the lock again before proceeding.
5.3 Changing The User Codes
Follow the instructions below to set a user code. When changing a user code, the master code or the
existing user code must be entered
codes.
1. Enter the master code or user code you want to change and press the ‘#’ key.
2. Wait until the beeping sound stops and the blue backlight remains on.
3. Enter the new user code and press the ‘*’ key. The lock will emit two beeps to confirm the code
has been successfully saved.
The new user code must have the same sequence number as the prior code i.e. if the previous user
code started with ‘1’, the new user code must still begin with ‘1’.
first. This means users will have the ability to change their own
confirm the code has been successfully saved.
each user code is any number from ‘1-8’. The remainder may be any combination of digits from ‘0-9’.
• To unlock the lock with a user code, enter the code beginning with a number ‘1-8’ and press the
‘#’ key. The lock will emit sound and the green indicator will light up. While sound emits, the lock is
unlocked and will return to the locked position immediately after the sound stops.
• Remember, the door should always be ajar when adding and/or changing codes.
• The sequence numbers for the user codes are ‘1-8’, therefore you must ensure the fi rst digit of
8
5.4 Deleting The User Codes
To delete an individual user code, follow the instructions below.
1. Enter the master code and press the ‘#’ key.
2. Wait until the beeping sound stops and the blue backlight remains on.
3. Enter ‘0000’ and the sequence number of the code you want to delete and press the ‘*’ key e.g. to
delete the user code starting with one, enter ‘00001’. The lock will emit several beeps to confirm the
selected user code has been erased.
4. If desired, repeat the steps above to delete any other user codes.
If multiple user codes are lost or forgotten or otherwise should be erased, they may be deleted via a
soft or hard reset of the lock. Refer to Section 7.
Section 6. Passage Code Information & Instructions
After the passage code is set, the YL-99 may be set to passage mode by entering the passage
code. In passage mode, all users can press any key to open the door without requiring a code.
6.1 General Passage Code Information
The following information applies to your YL-99’s passage code:
• All codes can be a maximum of 15 digits including the sequence number.
• The sequence numbers for the user codes are ‘1-8’, therefore you must ensure the
each user code is any number from ‘1-8’. The remainder may be any combination of digits from ‘0-9’.
first digit of
9
• To unlock the lock, enter the code beginning with a number ‘1-8’ and press the ‘#’ key. The lock
will emit sound and the green indicator will light up. While sound emits, the lock is unlocked and will
return to the locked position immediately after the sound stops.
• The passage code doubles as an additional user code. It may be entered to open the lock.
• Remember, the door should always be ajar when modifying any code in any way.
6.2 Setting The Passage Code
Follow the instructions below to set the passage code.
1. Enter the current passage code and press the ‘#’ key.
2. Wait until the beeping sound stops and the blue backlight remains on.
3. Enter a new passage code starting with ‘9’ and press the ‘*’ key. The lock will emit two beeps to
confirm the code has been successfully saved.
The passage code will always begin with ‘9’.
6.3 Deleting The Passage Code
Follow the instructions below to delete the passage code.
1. Enter the master code and press the ‘#’ key.
2. Wait until the beeping sound stops and the blue backlight remains on.
3. Enter ‘00009’ and then press the ‘*’ key. The lock will emit several beeps to confirm the code has
been erased.
Inhaltsverzeichnis
Andere Turbolock Türschloss Handbücher
