Turbolock TL-400KBL Bedienungsanleitung
www.turbolock.com
Customer Service: 855-850-8031
TM
Section 1
Information & Safety Warnings 4
1.1 Introduction 4
1.2 Safety Warnings 4
1.3 Disposal at End-of-Life 5
Section 2
Lock Functions 6
2.1 Low Battery Notification 6
2.2 Alarm Trigger 6
Section 3
Overview 6
3.1 Box Contents 6
3.2 Product Parts 7
Section 4
Preparing for Use 8
Section 5
Using the TL-400KBL Bike Lock 9
5.1 Unlocking your Bike Lock 9
5.2 Locking your Bike Lock 10
Section 6
Changing the Admin Password 11
6.1 Information 11
6.2 Changing the Admin Password 11
Section 7
Adding User Passwords 12
Section 8
The Mute Function 12
8.1 Activating Mute Mode 12
8.2 Deactivating Mute Mode 13
Section 9
The TurboLock App 13
9.1 App Installation 13
9.2 Pairing 13
9.3 Generating & Converting Keypad
Passwords 15
Section 10
Resetting the Lock 16
Section 11
Maintenance 17
Section 12
Specifications 18
Section 13
Troubleshooting 19
Section 14
Warranty 20
Table of Contents
4 TurboLock TL-400KBL
Section 1
Information & Safety Warnings
1.1 Introduction
This user manual will guide you through the functions and usage of your TurboLock TL-400KBL Bike Lock. It is important
that you follow all instructions and regard all notes that appear throughout this manual. Consult this manual before you
attempt to use your lock. If you have questions not answered by this manual or are in need of repair or non-routine
service, contact customer service at 1-855-850-8031. Before contacting customer service, please have your purchase
information ready as this may be needed during the call. This information may be recorded below.
Date of Purchase:
Place of Purchase:
1.2 Safety Warnings
When reading this manual, note these icons:
Notes with this icon MUST be read, understood, and obeyed to prevent injury or damage etc.
Notes with this icon include relevant information.
Overall Usage
• The lock shall only be used as described in this manual.
• Verify that all parts of the lock are accounted for. If any part is missing, contact customer service.
• If the battery compartment or surrounding parts are damaged, do not use the lock.
TurboLock TL-400KBL 5
• Never insert objects into the lock other than batteries as described in this manual.
• The lock is not a toy. Do not leave children unsupervised around the lock.
• Use only the parts included in the original packaging or received from TurboLock.
• Recharge the bike lock after hearing the lock’s low battery alarm.
• Never apply cleaner directly onto the lock. Only use clean water, mild cleaner, and soft non-abrasive cloth when
cleaning.
• Risk of shock. Do not allow water and/or liquids to enter the lock’s electric parts.
• Never submerge the lock or any of the lock’s components.
• The app must be downloaded and used for full functionality.
1.3 Disposal at End-of-Life
This product must not be disposed of by incineration, landfilling, or mixing with household trash. Improper disposal of the
battery contained within this product may result in the battery heating up, rupturing, or igniting which may cause serious
injury. The substances contained inside the battery present chemical risks to the environment. The recommended
disposal for any TurboLock TL-400KBL Bike Lock at its end-of-life is to dispose of the entire unit at or through an
e-waste recycling center, program, or facility. Local regulations and laws pertaining to the recycling and disposal of
lithium-ion batteries and/or products containing them will vary according to country, state, and local governments. You
must check laws and regulations corresponding to where you live in order to properly dispose of the battery and/or unit.
It is the user’s responsibility to dispose of their waste equipment properly in accordance with local regulations and laws.
For additional information about where you should drop off your batteries and electrical or electronic waste, please
contact your local or regional waste-management office, your household waste disposal service, or your point-of-sale.
6 TurboLock TL-400KBL
Section 2
Lock Functions
2.1 Low Battery Notification
The lock features a function that will notify you if the battery is low. Every time the lock is used, a beeping sound will
issue to indicate low battery life. After detecting this notification, replace the batteries as soon as possible. When the low
battery notification starts, the lock still can be used about 50 times before the batteries fully deplete.
2.2 Alarm Trigger
If the chain plug is not properly inserted into the lock hole, pressing the lock button will cause the lock to beep and the
indicator light to flash red to indicate incorrect operation.
Section 3
Overview
3.1 Box Contents
TL-400KBL Bike Lock x 1
User Manual x 1
Screwdriver x 1
Screws x 4
Store the screwdriver in a suitable location. As the design is unique, the lock cannot be recharged if the screwdriver is lost.
TL-400KBL Bike
Lock x 1 User Manual x 1Screwdriver x 1Screws x 4
TurboLock TL-400KBL 7
3.2 Product Parts
1 Chain Plug
2 Release Button
3 Keypad
4 Lock Button
5 Unlock Button
6 Battery Compartment
7 Power Switch
8 Micro USB Charging Port
Front View Rear View
1
2
3
4 5
6 7
8
8 TurboLock TL-400KBL
Section 4
Preparing for Use
• The battery is partially charged prior to shipment. The battery must be fully charged before using the bike lock
for the first time or when the low battery indicator light flashes red. It takes approximately 3 hours to fully charge.
• The life time of the battery pack is limited. Power is slowly drained when not in use, for the standby mode, the
battery can last up to 9 months, while the normal use can last up to about 6 months.
Step 1. Use the screwdriver to unfasten the Battery Compartment cover from the lock and set it aside.
Step 2. Slide the Power Switch to manually turn OFF your bike lock.
Step 3. Insert one end of the USB cable (not included) into the charging port and the other end into a wall outlet.
Make sure to slide the Power Switch to OFF before charging.
Step 4. After fully charging your bike lock, disconnect it from the USB cable. To turn the lock on, slide the Power
Switch ON and use the screwdriver to fasten the Battery Compartment.
USB Cable
(Not included)
Step 2
Battery Compartment
Step 1
TurboLock TL-400KBL 9
Section 5
Using the TL-400KBL Bike Lock
Make sure the bike lock has been fully charged and Power Switch is in the ON position.
The TL-400KBL Bike Lock provides a variety of methods to unlock your bike. Each time the lock disengages to unlock
the bike, the bike lock will beep and vibrate to indicate successful operation.
5.1 Unlocking your Bike Lock
Using the Admin Password
Step 1.
Press any key so that the keypad lights up, enter the Admin Password, and then press the Unlock Button ‘ ’.
Step 2. The bike lock has successfully unlocked when it issues a beeping sound and vibrates.
Step 3. Press the Release Button to disengage the chain plug. Pull it out from the lock hole to open your bike lock
completely.
The Admin Password must be changed from the default manufacturing password. See Section 6.
If you have trouble pulling out the chain plug, first make sure the plug is completely perpendicular to the lock
and that the release button is fully depressed before attempting to pull out the chain plug.
Using a User Password
Step 1. Press any key so that the keypad lights up, enter the password received from the app’s admin, and then
press the Unlock Button ‘ ’.
Step 2. The bike lock has successfully unlocked when it issues a beeping sound and vibrates.
10 TurboLock TL-400KBL
Step 3. Press the Release Button to disengage the chain plug. Pull it out from the lock hole to open your bike lock
completely.
User Passwords may have restricted access according to the app admin’s discretion.
Using the Turbolock App
• Before using the TurboLock app to unlock your bike lock, make sure you have installed the correct application and
paired it successfully before with the TL-400KBL. For more information about the app installation and pairing,
please refer to Section 9.
• Make sure you have turned on your smartphone’s Bluetooth®function.
Step 1. Open the TurboLock app on your smartphone and select the correct bike lock.
Step 2. Press any key on the bike lock so that the keypad lights up, and the bike lock system will unlock in about 5
seconds.
Step 3. Press the Release Button to disengage the chain plug. Pull it out from the lock hole to open your bike lock
completely.
5.2 Locking your Bike Lock
Step 1. Press and hold the Release Button while inserting the chain plug into the lock hole then let go. The plug
should click into place.
Step 2. Press Lock Button ‘ ’. The bike lock has successfully locked when it issues a beeping sound and vibrates.
Test whether the bike lock has successfully locked by pressing the Release Button and checking if the chain
plug disengages and/or can be pulled out.
Andere Handbücher für TL-400KBL
1
Inhaltsverzeichnis
Andere Turbolock Sperren Handbücher
Turbolock
Turbolock TL111 PRO Bedienungsanleitung
Turbolock
Turbolock TL-100 Bedienungsanleitung
Turbolock
Turbolock TL117 Bedienungsanleitung
Turbolock
Turbolock TL116 Bedienungsanleitung
Turbolock
Turbolock TL117 Bedienungsanleitung
Turbolock
Turbolock TL88 Bedienungsanleitung
Turbolock
Turbolock TL114 Bedienungsanleitung
Turbolock
Turbolock TL-400KBL Bedienungsanleitung
Turbolock
Turbolock TL111PRO Bedienungsanleitung
Turbolock
Turbolock tl-200 Bedienungsanleitung
