TV One Magenta Encoder-100 Bedienungsanleitung

Firmware version1.05.03.007and above

QSG-ENCODER-100-V1.00

May 2017

Encoder-100 Streaming Media Encoder

Quick Start Guide V1.00

In this guide

About your Encoder-100 2

Quick start 3

Regulatory compliance 9

QSG-ENCODER-100 1

Thanks for buying this Encoder-100 from tvONE.

The Encoder-100 streaming media encoder allows you to stream high

quality video and audio from a range of sources to the Streaming

media and 4K playback input module of your CORIOmaster™,

CORIOmaster mini™, or CORIOmaster micro™.

Features

nConvert video and audio to high quality digital stream.

nHigh quality, low bandwidth encoding with H.264 compression.

nFull 1080p HD support at up to 60frames per second.

nSupports unicast and multicast streaming.

nHDMI video and audio input and output.

nAnalog audio input and output.

nPreview your video signal and stream separately.

Recommendations

nFor best results, use Gb Ethernet cables and equipment.

nIn industrial environments, use shielded Ethernet cables.

Shielded Ethernet cables are often marked F/UTP or FTP.

2 MagentabytvONE

About your Encoder-100

Encoder-100 rear panel

DC5V Connect to an electrical outlet

LAN Sends encoded signal to your network

Connect to your network with Ethernet

PREVIEW Allows you to preview your encoded signal

Connect to a display with a VGA cable

HDMIOUT Allows you to preview your encoded signal

Connect to a display with an HDMI cable

HDMIIN Receives video and digital audio signal from a source

Connect to a source with an HDMI cable

AUDIOOUT Allows you to preview your audio signal

Connect a speaker with a 3.5mm jack audio cable

AUDIOIN Receives analog audio from a source

Connect a 3.5mm jack audio cable

Note: audio is supported by CORIOmaster micro™

only

QSG-ENCODER-100 3

Quick start

It's easy to get started with the Encoder-100, but if you want more help with any

of these steps, select in CORIOgrapher™ and search, or ask a question.

The Encoder-100 cannot encode HDCP encoded sources.

Before you start

To use an Encoder-100, you must have a Streaming media and 4K

playback input module installed in your CORIOmaster™, CORIOmaster

mini™, or CORIOmaster micro™.

Setting up the Encoder-100

Connect your cables.

A. Connect the power supply to an electrical outlet.

B. Connect an Ethernet cable to your network.

C. Connect an HDMI cable to the video source that you wish to

stream.

For example, you could connect a camera, an endoscope, or a

media player.

4 MagentabytvONE

nOPTIONAL: if you want to stream analog audio, or preview your

audio, connect a 3.5mm jack audio cable.

nOPTIONAL: if you want to see a preview of your stream, connect a

VGA cable to PREVIEW, or an HDMI cable to HDMIOUT, and to a

display.

The power connector is a

latching power connector. To

remove the power connector

from your Encoder-100, slide

the sleeve backward.

Configuring the Encoder-100 with CORIOgrapher™

1. Open CORIOgrapher™ , connect to your CORIOmaster™, and read

the configuration from your device.

QSG-ENCODER-100 5

2. Set up a video wall that includes at least one window playing the

Streaming media and 4K playback input module, and select Take.

3. Double-click the window you wish to play streaming media, and

select (Media Player) Manage.

4. Select IP Streams, select your Encoder-100, and select Manage.

6 MagentabytvONE

When you first connect, your Encoder-100 is named with its ID

number. Find the ID number is on the bottom of your Encoder-100.

If your Encoder-100 isn't displayed, select Find and enter the URL

of your Encoder-100.

5. Select System, and name your Encoder-100.

Names can be up to 62 characters long, and can't be blank.

6. Select Network, and choose network settings for your Encoder-

100.

QSG-ENCODER-100 7

nIf you choose DHCP, an IP address is assigned to you.

nIf you choose a static IP address, enter a value for your IP

address, subnet mask, and gateway.

If you need help with network settings, contact your network

administrator.

Static IP address

If you choose a static IP address, make sure you enter a unique value for

your IP address. Using the same IP address for multiple devices can cause

your devices to disconnect. Contact your network administrator for help.

7. Select Capture, and check that your audio source is correct.

8 MagentabytvONE

8. Select Encode, and choose a profile.

The profile you choose depends on the bandwidth of your

connection and your quality requirements. The default settings

produce a high quality stream.

9. Select Status >Start encoding.

Read more about configuring encoders in CORIOgrapher™ Help.

Andere Handbücher für Magenta Encoder-100

Inhaltsverzeichnis

Andere TV One Medienkonverter Handbücher

TV One

TV One C2-1100 Bedienungsanleitung

TV One

TV One C2-2000A Series Bedienungsanleitung

TV One

TV One 1T-V1280HD-ST Bedienungsanleitung

TV One

TV One 1T-DV1394-A70 Bedienungsanleitung

TV One

TV One 1T-VS-624 Bedienungsanleitung

TV One

TV One 1T-VS-622 Bedienungsanleitung

TV One

TV One 1T-C2-100 Bedienungsanleitung

TV One

TV One C3-540 CORIOmaster Bedienungsanleitung

TV One

TV One C2-2000 Series Bedienungsanleitung

TV One

TV One 1T-AVPC-HDMI Bedienungsanleitung

TV One

TV One 1T-AVPC-HDMI Bedienungsanleitung

TV One

TV One 1T-AP-299 Bedienungsanleitung

TV One

TV One C2-5000 Series Bedienungsanleitung

TV One

TV One C3-540 CORIOmaster Bedienungsanleitung

TV One

TV One C2-1000 Series Bedienungsanleitung

TV One

TV One CORIOmaster2 MK2 Bedienungsanleitung

TV One

TV One 1T-C2-100 Bedienungsanleitung

TV One

TV One C3-540 CORIOmaster Bedienungsanleitung

TV One

TV One 1T-VS-658 Bedienungsanleitung

TV One

TV One 1T-PCDVI-PCDVI Bedienungsanleitung

TV One

TV One C2-2855 Bedienungsanleitung

TV One

TV One C2-2000 Series Bedienungsanleitung

TV One

TV One DV-1394 Pro-SDI Bedienungsanleitung

TV One

TV One C2-2100 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung