TW Audio BBT24 Bedienungsanleitung

Assembly

Instructions

BBT24

Assembly Instructions BBT24

Introduction

The bracket BBT24 is an accessory for the T24(N) loudspeaker.

It is characterized by a subtle look, a remarkable size to weight ratio and ease of use.

Instructions in this user manual

NOTE

TIP

CAUTION

WARNING

Thank you for choosing a high-quality product “MADE IN GERMANY” from the brand

TW AUDiO.

If you lend your product to another party, inform that party of the safety-related operating pro-

cedures and hand over this assembly guide. If you require additional copies of this manual,

you can obtain them free of charge from TWAUDiO or download them from www.twaudio.de

Strictly adhere to the instructions contained in this operating manual that are marked as

follows:

This symbol in combination with the signal word “Warning” identiﬁes a potentially hazardous

situation. Failure to comply with this safety instruction can lead to serious injury or even death.

This symbol in combination with the signal word “Caution” identiﬁes a potentially hazardous

situation. Failure to comply with this safety instruction can lead to light or moderate injury.

This symbol in combination with the signal word “Note” identiﬁes a potentially hazardous

situation. Failure to comply with this safety instruction can lead to product damage.

This symbol in combination with the signal word “Tip” identiﬁes additional information or

notes that will simplify working with TWAUDiO products on the basis of practical experience.

WARNING

This symbol in combination with the signal word “Warning” identiﬁes a potentially hazardous

situation. Failure to comply with this safety instruction can lead to serious injury or even death.

Assembly Instructions BBT24

Notes on the products

Read manual

before use!

Before using the device, carefully read the assembly instructions and keep it with the

BBT24 bracket.

General information

Assembly instructions: OM-BBT24

Version 2.0 en, 08/2022

All information contained in this operating manual was correct to the best of our knowledge

at the time of printing.

Quality warranties or assurance of suitability for a certain type of use based on the technical

speciﬁcations, dimensions and weights are not granted by TWAMBO.

TWAMBO also shall not assume liability for any secondary damage (property damage and/or

personal injury) nor for the failure to comply with this operating manual!

TWAMBO reserves the right to update this document based on recent developments.

TWAMBO GmbH

Karl-Hofer-Str. 42

14163 Berlin

Germany

Phone : + 49 (0) 71 41-48 89 89 0

Fax: + 49 (0) 71 41-48 89 89 99

E-Mail: [email protected]

WWW: www.twaudio.de

Assembly Instructions BBT24

Content

1. Safety | Intended use...................................................................................................... 5

2. Overview ........................................................................................................................ 7

2.1 Components ........................................................................................................... 7

3. Technical data ................................................................................................................ 8

3.1 Data sheet............................................................................................................... 8

4. Commissioning............................................................................................................... 9

4.1 Setup ...................................................................................................................... 9

4.2 Use without or with MCT main cradle frame ............................................................ 9

4.3 Wind load ................................................................................................................ 9

4.4 Preparing BBT24 bracket ...................................................................................... 10

4.5 Preparing T24(N) loudspeaker ............................................................................... 11

4.6 Mounting step 1 - BBT24 bracket ......................................................................... 12

4.7 Mounting step 2 - BBT24 bracket ......................................................................... 12

4.8 Mounting step 3 - BBT24 bracket ......................................................................... 13

4.9 General safety instructions for setting up the following rigging variants................... 13

4.10 Variant: 1x BBT24 bracket with 1x T24(N) loudspeaker........................................ 14

4.11 Standard as well as maximum Variant.................................................................. 15

5. Transport and storage .................................................................................................. 16

6. CE Conformity Declaration............................................................................................ 17

7. Disposal ....................................................................................................................... 17

Assembly Instructions BBT24

1. Safety | Intended use

The BBT24 bracket was developed for use in professional sound systems. The bracket may

only be used by trained and qualiﬁed personnel.

The BBT24 bracket may only used with the T24(N) loudspeaker.

This rigging manual describes how to use the BBT24 bracket correctly. Any other use shall

be deemed improper and may result in damage or even injury.

Modiﬁcations or alterations to individual parts of the BBT24 bracket are not permitted! Danger

to life!

WARNING

Before every operation, check the scope of delivery of the BBT24 bracket for its complete-

ness and ensure that all parts are in perfect condition.

The scope of delivery includes speciﬁed components. Only use the recommended and cer-

tiﬁed components.

WARNING

The BBT24 bracket is designed both for indoor and outdoor use.

CAUTION

The BBT24 bracket may only be used by trained and qualiﬁed personnel. Personnel must

check the BBT24 bracket for suitability before each use.

WARNING

The BBT24 bracket must be taken out of operation immediately as soon as visible damage

to the parts can be seen.

WARNING

Please keep all elements of the BBT24 bracket away from children! The small parts can easily

be swallowed and lead to suffocation!

WARNING

Please adhere to the following safety instructions to avoid risks when using accessories.

Note the operating modes described in this assembly instructions. Other uses are not per-

missible.

Damage caused by improper use is not covered by TWAMBO.

Assembly Instructions BBT24

The payload of the BBT24 bracket is designed of not more than six T24(N) loudspeaker. The

following additional components are required for this: CBT24 cradle bar for ﬂying, BCT24 rig-

ging adapter and BLT24 Boxlink connecting cables on both sides of the T24(N) loudspeaker.

Do not exceed this payload.

WARNING

When moving (assembling, dismantling, maintaining) the BBT24 bracket with T24(N) loudspe-

aker, ensure sufﬁcient space to prevent collisions with other objects.

WARNING

Do not squeeze or twist the electrical cables of the T24(N) loudspeaker during the installa-

tion of the BBT24 bracket! The respective national electrotechnical rules and regulations are

applicable.

CAUTION

Before mounting the BBT24 bracket check that e.g. trusses or ceilings are capable to carrying

the payload of the components.

WARNING

Make sure that no water pipes, electrical lines or any other lines are behind the intended place

of mounting.

Only use wall plugs and screws which are suitable for the intended mounting and structural

fabric. All screws must be set and tightened properly. Ensure that the ﬁxing holes have the

correct depth and diameter. Always use all ﬁxing holes.

When working with heavy loads exceeding 20 kg (44 lbs.), use suitable aids (dollies, hoisting

slings, etc.). Multiple persons may be required depending on the situation.

NOTE

WARNING

All screw connections should be checked when the BBT24 bracket is installed. If there are

loose screws, tighten them. If this is no longer possible, the screws and nuts must be repla-

ced.

When assembling and disassembling your system setups, make sure that you never care-

lessly remove the quick-locking pins of the BBT24 bracket with your ﬁngers, hands or other

body parts or reach between the speakers. Due to the gravity of the upper part, it can fall

backwards or forwards.

There is a danger of crushing!

WARNING

Assembly Instructions BBT24

2. Overview

2.1 Components

1. Quick-locking pin 12 x 30..................................................................................1 piece

2. Upper part, hinged ............................................................................................ 1 piece

3. Quick-locking pin 8 x 30....................................................................................1 piece

4. Track .................................................................................................................1 piece

Figure 2.1 - Overview

Assembly Instructions BBT24

3. Technical data

Maximum load capacity:

for 1x BBT24 bracket

in combination with:

1x CBT24 cradle bar for ﬂying and

1x BCT24 rigging adapter

1x T24N

Maximum load capacity:

for 6x BBT24 bracket

in combination with:

1x CBT24 cradle bar for ﬂying,

1x BCT24 rigging adapter and

10x BLT24 Boxlink-connecting cab-

les on both sides of the

T24(N) loudspeakers

6x T24N

Dimensions (h x w x d) 731 x 105 x 98 mm [28.78 x 4.13 x 3.86 in]

Weight 2,1 kg [4.62 lbs]

Surface Powder-coated

3.1 Data sheet

Assembly Instructions BBT24

4.1 Setup

The BBT24 bracket is designed for hanging operation. TWAUDiO provides a wide range of

accessories to securely attach the bracket.

NOTE

4. Commissioning

4.3 Wind load

WARNING

TW AUDiO recommends using only the accessories speciﬁed by TWAUDiO for securing and

mounting loudspeakers.

Before setting up the system outdoors, consider unexpected wind conditions at the opera-

tion site!

Disassemble your system immediately when wind speeds exceed 8 bft (34 to 40 kn / 62 to

74 kph / 38.5 to 46 mph) and secure the system components!

Make sure that there are no persons in the immediate vicinity of the system structure!

Make sure that the system structures are not operated over the audience at wind speeds in

excess of 6 bft (22 to 27kn / 39 to 49kph / 24.2 to 30.45mph) and that there are no persons

in the immediate vicinity of the system structure!

Please note that setting up the BBT24 bracket always requires two persons!

WARNING

4.2 Use without or with MCT main cradle frame

Note that when used without the MCT24 main cradle frame, the BBT24 bracket can only be

used in combination with the CBT24 cradle bar for ﬂying as well as the BCT24 rigging adap-

ter for using T24(N) speakers!

WARNING

Note that when used with the MCT24 main cradle frame, the BBT24 bracket can only be

used in combination with the BAT24 adapter as well as the CBT24 cradle bar for ﬂying for

using T24(N) speakers!

Assembly Instructions BBT24

4.4 Preparing BBT24 bracket

Figure 4.4 - Loosen the quick-locking pins

lower

locking pin

upper

locking pin

Loosen both quick-locking pins on the upper part of the bracket and fold it open as shown

in ﬁgure 4.4.

NOTE

When assembling and disassembling your system setups, make sure that you never care-

lessly remove the quick-locking pins of the BBT24 bracket with your ﬁngers, hands or other

body parts or reach between the speakers. Due to the gravity of the upper part, it can fall

backwards or forwards.

There is a danger of crushing!

WARNING

Inhaltsverzeichnis

Andere TW Audio Rack & Stand Handbücher

TW Audio

TW Audio SBM8i Bedienungsanleitung

TW Audio

TW Audio GSP20 Bedienungsanleitung

TW Audio

TW Audio WHF Bedienungsanleitung

TW Audio

TW Audio VERA LA900 Bedienungsanleitung

TW Audio

TW Audio QBT20i Bedienungsanleitung

TW Audio

TW Audio SBC12 Bedienungsanleitung

TW Audio

TW Audio FDB30 Bedienungsanleitung

TW Audio

TW Audio SBM12i Bedienungsanleitung

TW Audio

TW Audio QBM15 Bedienungsanleitung

TW Audio

TW Audio SBT20 Bedienungsanleitung

TW Audio

TW Audio SBC15 Bedienungsanleitung

TW Audio

TW Audio QBM12i Bedienungsanleitung

TW Audio

TW Audio QBM8i Bedienungsanleitung

TW Audio

TW Audio QBM6 Bedienungsanleitung

TW Audio

TW Audio BLS Bedienungsanleitung

TW Audio

TW Audio MKC5 Bedienungsanleitung

TW Audio

TW Audio SBM8 Bedienungsanleitung

TW Audio

TW Audio MKC5 Bedienungsanleitung

TW Audio

TW Audio VERA GSK36 Bedienungsanleitung

TW Audio

TW Audio GSP20 Bedienungsanleitung

TW Audio

TW Audio WPC5 Bedienungsanleitung

TW Audio

TW Audio VERA ORF900 Bedienungsanleitung

TW Audio

TW Audio SBT20 Bedienungsanleitung

TW Audio

TW Audio SBT24 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung