TYAN Transport NR12 B6601 Bedienungsanleitung

Chapter 1: Overview 1

Chapter 1: Overview

1.1 About the Transport NR12 B6601

Congratulations on your purchase of the TYAN TransportTM

NR12 (B6601), a highly-optimized rack-mountable barebone

system. The TransportTM NR12 (B6601) offers the latest pro-

cessor server system, providing a rich feature set and incred-

ible performance. Leveraging advanced technology from

Intel®, the TransportTM NR12 (B6601) server system is capa-

ble of offering scalable 32-bit computing, high-bandwidth

memory design, and a lightning-fast PCI bus implementation.

The TransportTM NR12 (B6601) not only empowers your

company in today’s demanding IT environment but also offers

a smooth path for future application usage.

TYAN is also proud to deliver the TransportTM NR12 (B6601)

in IDE flavor while supporting one (1) 2.5” internal hard drive.

The TransportTM NR12 (B6601) uses the latest tooling-made

chassis featuring a slim structure, tool-less and modularized

design, and a solid mechanical enclosure. All of this provides

the TransportTM NR12 (B6601) the power and flexibility to

meet the needs of nearly any server application.

2 Chapter 1: Overview

1.2 Features

Enclosure

• Industry 19” 1U rack-mount chassis

• Dimension: W 16.93” x D 11.46” x H

1.72” (W 430mm x D291mm x H

43mm)

• 2.5”HDD Bay x1, support internal

HDD

Processors

• Intel socket 478 x1, supports P4

(Northwood Core) up to 3.06G

CPU; P4 (Prescott Core) up to 3.2G

• Supports FSB 400MHz and

533MHz.

Chipset

• Intel 845GV Memory Controller Hub

• Intel ICH4 I/O Controller Hub

• Intel 10/100 Ethernet & Gbe LAN

Controllers

• Cavium CN-1005 Security Proces-

sor (option)

Memory

• 184-pin DDR sockets x2, supports

128MB~1GB DIMM and up to 2GB

memory size

• 64-bit single channel memory bus

support

• Supports un-buffered DDR

200/266/333 compliant non-ECC

DIMM

Graphics

• Integrated graphics support by Intel

845GV

Expansion Slot

• 32-bit 33MHz PCI slot (3.3V) x1

• Support 1-to-1 riser card

Storage

• Supports 50-pin Compact Flash

Type II x 1

• Supports 2.5” PATA hard drive or

DOM x1

Front/Rear I/O Ports

• Serial port x1 with D-Sub connector

• USB 2.0 ports x2 with dual-stack

connector

• Up to 6 ports RJ-45 LAN connector

includes Transformer & LED (refer

to available models)

Rear Panel I/O and Button

• Power on button x1

System Management

• System fan speed control and

tachometer monitoring

• Monitoring voltages for CPU, mem-

ory & power supply

• Monitoring temperature for CPU &

environment

• Chassis intrusion detection support

• Watch dog timer supported

Networking Security

• Supports IPsec/SSL networking

security (refer to available models)

BIOS

• Phoenix BIOS with 4Mbit Flash

ROM

• Supports ACPI 2.0

• Supports boot from USB device

• Power-on mode control for AC

power loss recovery

System Cooling

• Passive Cu CPU heatsink x1

• 4028 (9,200rpm) system fan x3

• CPU fan duct x1 (option)

Power Supply

• 200W power supply with PFC

• 100V~240V AC input

Safety

• FCC Class A/CE (Declaration of

Conformity)

• BSMI

Chapter 1: Overview 3

Accessories

• 1-to-1 PCI riser card x1

• 44-pin IDE cable x1

•Powercordx1

• Passive 1U Cu CPU heatsink x1

• A pair mounting flange (option)

• LCM kit with HW monitor SDK

(option)

• CPU fan duct x1

Available Models

• B6601N12P6E

- 4 FE ports, 2 GbE ports, with Encryp-

tion CN-1005

• B6601N12P6

- 4 FE ports, 2 GbE ports

4 Chapter 1: Overview

1.2.1 Box Contents

The box includes the following main units.

HDD Screws x1 PS/2 Cable x1

VGA Cable x1

Grease x1

Power Cable x1

Mounting Ears x2 &

Screws

CD x1

Mainboard User’s Manual x1

Barebone User’s Manual x1

Chapter 1: Overview 5

1.3 About the Product

1.3.1 Front View

1.3.2 Rear View

LAN1, LAN2, LAN3, LAN4, LAN5, LAN6

(From left to right)

USB x 2

COM Port

Power LED (green)

HDD LED (yellow)

Reset Button LCM (Optional)

Power Supply Socket System Fans x3

PCI Slot

Power on Button

Chapter 2: Setting Up 7

Chapter 2: Setting Up

2.0.1 Before You Begin

This chapter explains how to install the CPU, CPU heatsink,

memory modules, and hard drives. Instructions on inserting a

PCI card are also given.

Take note of the precautions mentioned in this section when

installing your system.

2.0.2 Work Area

Make sure you have a stable, clean working environment.

Dust and dirt can get into components and cause malfunc-

tions. Use containers to keep small components separated.

Putting all small components in separate containers prevents

them from becoming lost. Adequate lighting and proper tools

can prevent you from accidentally damaging the internal

components.

2.0.3 Tools

The following procedures require only a few tools, including

the following:

•A cross head screwdriver

•A grounding strap or an anti-static pad

Most of the electrical and mechanical connections can be dis-

connected using your fingers. It is recommended that you do

not use needle-nosed pliers to remove connectors as these

can damage the soft metal or plastic parts of the connectors.

8 Chapter 2: Setting Up

2.0.4 Precautions

Components and electronic circuit boards can be damaged

by discharges of static electricity. Working on a system that is

connected to a power supply can be extremely dangerous.

Follow the guidelines below to avoid damage to the Transport

NR12 or injury to yourself.

•Ground yourself properly before removing the top

cover of the system. Unplug the power from the

power supply and then touch a safely grounded

object to release static charge (i.e. power supply

case). If available, wear a grounded wrist strap. Alter-

natively, discharge any static electricity by touching

the bare metal chassis of the unit case, or the bare

metal body of any other grounded appliance.

•Avoid touching motherboard components, IC chips,

connectors, memory modules, and leads.

•The motherboard is pre-installed in the system.

When removing the motherboard, always place it on

a grounded anti-static surface until you are ready to

reinstall it.

•Hold electronic circuit boards by the edges only. Do

not touch the components on the board unless it is

necessary to do so. Do not flex or stress circuit

boards.

•Leave all components inside the static-proof packag-

ing that they ship with until they are ready for installa-

tion.

•After replacing optional devices, make sure all

screws, springs, or other small parts are in place and

are not left loose inside the case. Metallic parts or

metal flakes can cause electrical shorts.

NOTE:

• All connectors are keyed to only attach one way.

• Always use the correct screw size as indicated in the

procedures.

Chapter 2: Setting Up 9

2.1 Removing the Chassis Cover

Before installing any components, you must remove the

chassis cover.

1. Release the four (x4) screws securing the chassis from

two sides.

2. Release the two (x2) screws on the back side.

3. Follow the direction below to remove the chassis cover.

10 Chapter 2: Setting Up

2.2 Installing the CPU, Heatsink and Air Duct

Follow these instructions to install the CPU and CPU heat-

sink.

1. Locate the CPU socket and follow the direction below to

take the air duct off.

2. Follow the directions below to release the two locking

levers of heatsink.

3. Follow the directions below to lift the locking levers and

then take the heatsink off.

Chapter 2: Setting Up 11

4. Follow the direction below to lift the locking lever.

5. Put the CPU on the CPU socket and then follow the

directions below to lift the locking levers. NOTE: Make

sure the edge of triangle breach is located at the correct

side.

6. Put the heatsink on the CPU socket and then follow the

directions below to lock the levers. After that, put the air

duct on the heatsink to finish the installation.

Inhaltsverzeichnis

Andere TYAN Server Handbücher

TYAN

TYAN Transport GT24 B3992 Bedienungsanleitung

TYAN

TYAN FT83A-B7129 Kurzanleitung

TYAN

TYAN TN200-B7108 Kurzanleitung

TYAN

TYAN TA70-B8237 Kurzanleitung

TYAN

TYAN GT24-B7066 Kurzanleitung

TYAN

TYAN FT48-B8812 Kurzanleitung

TYAN

TYAN Transport GT14 B2933 Bedienungsanleitung

TYAN

TYAN GT62B-B7076 Kurzanleitung

TYAN

TYAN GC68A-B7136 Kurzanleitung

TYAN

TYAN GN70-B8236-HE Kurzanleitung

TYAN

TYAN GA88-B5631 Kurzanleitung

TYAN

TYAN GC68-B8036 Kurzanleitung

TYAN

TYAN TS75A-B8252 Kurzanleitung

TYAN

TYAN FT76-B7922 Kurzanleitung

TYAN

TYAN GT24 B8212 Bedienungsanleitung

TYAN

TYAN TA77-B7061 Kurzanleitung

TYAN

TYAN TS65-B7126 Kurzanleitung

TYAN

TYAN YR190-B7018 Bedienungsanleitung

TYAN

TYAN TS65-B8036 Kurzanleitung

TYAN

TYAN Tank GT20 B5372 Bedienungsanleitung

TYAN

TYAN FT83-B7119 Kurzanleitung

TYAN

TYAN Tank GT25 B5381 Kurzanleitung

TYAN

TYAN Tank GT25 (B5381) Kurzanleitung

TYAN

TYAN Transport GT20 B3870 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung