TYAN Transport TN27 B4987 Bedienungsanleitung

Transport TN27

B4987

Service Engineer’s Manual

PREFACE

This publication, including all photographs, illustrations, and software,

Neither this manual, nor any material contained herein, may be

reproduced without written consent of manufacturer.

Version 1.00

Disclaimer

Information contained in this document is furnished by TYAN

Computer Corporation and has been reviewed for accuracy and

reliability prior to printing. TYAN assumes no liability whatsoever, and

disclaims any express or implied warranty, relating to sale and/or use

of TYAN products including liability or warranties relating to fitness for

a particular purpose or merchantability. TYAN retains the right to

make changes to product descriptions and/or specifications at any

time, without notice. In no event will TYAN be held liable for any direct

or indirect, incidental or consequential damage, loss of use, loss of

data or other malady resulting from errors or inaccuracies of

information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN and Transport TN27 B4987 are trademarks of TYAN Computer

Corporation.

AMD, Opteron, Athlon, and combinations thereof are trademarks of

AMD Corporation.

Phoenix, PhoenixBIOS, and combinations thereof are trademarks of

Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

InfiniBand is a trademark of Mellanox Technologies.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe

Corporation.

Federal Communication Commission (FCC)

Notice for the USA Compliance Information

Statement (Declaration of Conformity

Procedure) DoC FCC Part 15: This device

complies with part 15 of the FCC Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference;

2) This device must accept any interference received including

interference that may cause undesired operation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the

receiver.

– Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class A limits for radio

interference as specified in the Canadian Department of

Communications Radio Interference Regulations. (Cet appareil est

conforme aux norms de Classe A d’interference radio tel que

specifie par le Ministere Canadien des Communications dans les

reglements d’ineteference radio.)

Notice for Europe (CE Mark)

This product is in conformity with the Council

Directive 89/336/EEC, 92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. There will be danger of

explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by manufacturer. Dispose

of used battery according to manufacturer instructions and in

accordance with your local regulations.

About this Manual

This manual provides you with instructions on installing your

Transport™TN27-B4987. This Manual is intended for

experienced users and integrators with hardware knowledge

of personal computers.

This manual consists of the following parts:

Chapter1: Provides an introduction to the TN27 B4987

barebones, standard parts list, describes the

external components, gives a table of key

components, and provides block diagrams of

the system.

Chapter2: Covers procedures on installing the CPU,

memory modules, PCI-E card，HTX card and

hard drives.

Chapter3: Covers removal and replacement

procedures for pre-installed components.

Appendix I: Describes the differences between

motherboard BIOS and system BIOS.

Appendix II: Covers procedures on installing the OPMA

card (M3295-2) into the SO-DIMM socket.

Appendix III: Listing the cable connection tables for

reference of system setup.

Appendix IV: Provides brief description on how to

configure and use the components of LSI

Logic IR software product with LSI Logic

SAS controller.

Appendix V: Provides brief description on how to install

InfiniBand Driver.

iii

SAFETY INFORMATION

Before installing and using the Transport™TN27-B4987, take note

of the following precautions:

– Read all instructions carefully.

– Do not place the unit on an unstable surface, cart, or stand.

– Do not block the slots and opening on the unit, which are

provided for ventilation.

– Only use the power source indicated on the marking label. If

you are not sure, contact the power company.

–

The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric shock.

Do not defeat the purpose of this pin. If you outlet does not

support this kind of plug, contact your electrician to replace

your obsolete outlet.

– Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

–Follow all warnings and cautions in this manual and on the

unit case.

–

Do not push objects in the ventilation slots as they may

touch high voltage components and result in shock and

damage to the components.

–When replacing parts, ensure that you use parts specified

by the manufacturer.

–When service or repairs have been done, perform routine

safety checks to verify that the system is operating correctly.

–Avoid using the system near water, in direct sunlight, or near

a heating device.

–Cover the unit when not in use.

Table of Contents

Chapter 1: Overview

1.1 About the Transport TN27 B4987…………………….……...…….… 1

1.2 Product Models…………………..……………………….………....... 2

1.3 Features……………………………………………………………….. 3

1.4 Standard Parts List……………………...….……..………................... 5

1.4.1 Box Contents……………………...…………………………………… 5

1.4.2 Accessories…………………………………………………………….. 7

1.5 Optional Parts…..……….………………………..……....................... 9

1.6 About the Product……….………………………..……....................... 10

1.6.1 System Front View…………………………..………………………… 10

1.6.2 System Rear View…………………………………............................... 11

1.6.3 LED Definitions………………………………………………………... 12

1.6.4 Motherboard Layout…………………………........................................ 14

1.6.5 Jumpers & Connectors……………………………………..................... 15

1.6.6 System Block Diagram…….................................................................... 22

1.6.7 Internal View………...…….................................................................... 23

Chapter 2: Setting Up

2.0.1 Before You Begin………..………………………….............................. 24

2.0.2 Work Area……………………………………………………............... 24

2.0.3 Tools …………….…………………….................................................. 24

2.0.4 Precautions ………………………………………………….................. 25

2.1 Installing Motherboard Components...………………..………............ 26

2.1.1 Removing the Chassis Cover…………………………………............... 26

2.1.2 Installing the CPU and Heatsink……………………………………….. 27

2.1.3 Installing the Memory……………..…………………………………… 30

2.1.4 Installing the PCI -E Card / HTX Card.................................................. 32

2.1.5 Installing the Hard Drive………………………………………………. 35

2.2 Rack Mounting………………….......................................................... 37

2.2.1 Installing the Server in a Rack………………......................................... 37

Chapter 3: Replacing Pre-Installed Components

3.1 Introduction…………………………………………………………… 42

3.1.1 Work Area……………………………………………………............... 42

3.1.2 Tools…………………………………………….………....................... 42

3.1.3 Precautions……………………………………………………............... 43

3.2 Disassembly Flowchart…………………………..…………………… 44

3.3 Removing the Cover……………………………..…….……………... 45

3.4 Replacing Motherboard Components……………..………………….. 46

3.4.1 Disconnecting All Motherboard Cables…………………...................... 46

3.4.2 Removing the Motherboard……………………………………………. 48

3.5 Replacing the Slim ODD……..…………………................................. 49

3.6 Replacing the M1003 LED Control Board…………………………... 51

3.6.1 M1003 LED Control Board Features………………………….............. 53

3.6.2 M1003 LED Control Board Connector Pin Definition………………… 54

3.7 Replacing the System Fan……………………...………..……............ 55

3.8 Replacing the M1022 Fan Board…………………………………….. 57

3.8.1 M1022 Fan Board Features……………………………………….…… 59

3.8.2 M1022 Fan Board Connector Pin Definition…………………………... 60

3.9 Replacing the M1223 HDD Backplane……..……............................... 61

3.9.1 M1223 HDD backplane Features for TN27- B4987……....................... 62

3.9.2 M1223 HDD backplane Connector Pin Definition..……………...…… 64

3.10 Replacing the Power Supply….………….......................................... 65

3.11 Replacing the M1025 Power Board Module....................................... 66

3.11.1 M1025 PDB Module Features……….………………………………… 67

3.11.2 M1025 PDB Module PWR connector Pin Definition…………….…… 68

Chapter 4: BIOS Setup

4.1 About the BIOS…………………………………………………...….. 67

4.2 BIOS Menu Bar…………………………………………………...….. 67

4.3 Setup Basics…..…………………………………………………...….. 68

4.4 Getting Help…..…………………………………..……………….….. 68

4.5 In Case of Problems……………………………………………...…… 68

4.6 BIOS Main Menu…………………………………………………….. 69

4.7 BIOS Advanced Menu……………………………………………..…. 70

4.7.1 CPU Configuration…….………………………………………………. 71

4.7.2 IDE Configuration Sub-Menu…………………………………………. 72

4.7.3 Super I/O Configuration Sub-Menu…………………………………… 77

4.7.4 ACPI Configuration Sub-Menu………………………………………... 78

4.7.5 APM Configuration……………………………………………………. 81

4.7.6 Event Log Configuration Sub-Menu…………………………………... 83

4.7.7 Hardware Health Configuration Sub-Menu……………………………. 84

4.7.8 Remote Access Configuration Sub-Menu……………………………... 87

4.7.9 USB Configuration Sub-Menu………………………………………… 88

4.8 PCI PnP Menu………………………………………………………... 90

4.9 Boot Menu……………………………………………………………. 92

4.9.1 Boot Settings Configuration Sub-Menu……………….………………. 92

4.9.2 Boot Device Priority………………..………………………….............. 94

4.9.3 Hard Disk Drives……………...……………………………….............. 95

4.9.4 Removable Drives…………..…………………………………………. 96

4.9.5 Network Drives..……………………………………………………….. 96

4.10 Security Menu……………………………………………………….. 97

4.11 Chipset Menu………………………………………………………... 98

4.11.1 Northbridge Configuration Sub-Menu………………………………… 99

4.11.2 Southbridge Configuration Sub-Menu………………………………… 106

4.11.3 Hyper Transport MCP55 Configuration Sub-Menu…………………… 107

4.12 Exit Menu…………………………………………………………… 108

Appendix I: Installing OPMA Card (M3295-2)

Appendix II: Cable Connection Table

Appendix III: LSI Logic Config Utility

Appendix IV: Installing InfiniBand Driver

Appendix V: FRU Parts Table

vii

Chapter 1: Overview

1.1 About the Transport™ TN27 B4987

Congratulations on your purchase of the TYAN Transport™

TN27 B4987, a highly-optimized rack-mountable barebone

system. The Transport™ TN27 B4987 is designed to support

quad AMD® Opteron™ 8000 series dual-core and

Quad-core 1207-pin processors and up to 32DIMMs,providing

a rich feature set and incredible performance. Leveraging

advanced technology from AMD, the Transport™ TN27 B4987

server system is capable of offering scalable 32 and 64-bit

computing, high-bandwidth memory design, and lightning-fast

PCI-E bus and HTX slot implementation. The Transport™ TN27

B4987 not only empowers your company in today’s demanding

IT environment but also offers a smooth path for future

application usage.

TYAN is also proud to deliver the Transport™ TN27 B4987 in

SAS flavor while supporting up to four (4) hot-swap hard drives

and one (1) slim ODD. The Transport™ TN27 B4987 uses

TYAN’s latest chassis featuring a robust structure and a solid

mechanical enclosure. All of this provides the Transport™ TN27

B4987 the power and flexibility to meet the needs of nearly any

server application.

Chapter 1: Overview

Inhaltsverzeichnis

Andere TYAN Server Handbücher

TYAN

TYAN TA70-B8237 Bedienungsanleitung

TYAN

TYAN Transport GT20-B2925 Bedienungsanleitung

TYAN

TYAN TS65-B8036 Kurzanleitung

TYAN

TYAN Transport TA26 B2932 Bedienungsanleitung

TYAN

TYAN TN70A-B8026 Kurzanleitung

TYAN

TYAN TS65-B7126 Kurzanleitung

TYAN

TYAN FT83A-B7129 Kurzanleitung

TYAN

TYAN FT48B-B7100 Kurzanleitung

TYAN

TYAN Tank GT24 B5383 Bedienungsanleitung

TYAN

TYAN Transport GX21 B2735 Bedienungsanleitung

TYAN

TYAN Transport GX18 Bedienungsanleitung

TYAN

TYAN MicroServer Series Bedienungsanleitung

TYAN

TYAN TN70-B7016 Kurzanleitung

TYAN

TYAN GT24 B8236 Bedienungsanleitung

TYAN

TYAN B8028Y190X2 Kurzanleitung

TYAN

TYAN KGT24-500 Kurzanleitung

TYAN

TYAN Transport GT26-B4987 Bedienungsanleitung

TYAN

TYAN TN71-BP012 Bedienungsanleitung

TYAN

TYAN FT83-B7119 Kurzanleitung

TYAN

TYAN GT62B-B5539 Kurzanleitung

TYAN

TYAN GT24 B5501 Bedienungsanleitung

TYAN

TYAN B5102 Bedienungsanleitung

TYAN

TYAN Transport GT20 B5151 Bedienungsanleitung

TYAN

TYAN GT20 B7002 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung