Tycon Power Systems TP-MS308 Bedienungsanleitung

USER’S MANUAL

TP-MS308/TP-MS316/TP-MS324

Power Source Equipment

(AC+DC Input, Gigabit PoE Midspan)

TYCON POWER SYSTEMS

User’s Manual TP-MS308/TP-MS316/TP-MS324

Contents

1. Introduction...........................................................................

Features................................................................................................

Package Contents.................................................................................

2. Hardware Description...........................................................

Physical Dimension...............................................................................

Front Panel............................................................................................

LED Indicators.......................................................................................

Rear Panel............................................................................................

Power On..............................................................................................

Network Application...............................................................................

RJ-45 Remote Control Port...................................................................

3. Software Utility Installation..................................................

4. GUI Management...................................................................

Display and Illustration..........................................................................

System Login........................................................................................

Modify Password…...............................................................................

Edit Station TCP/IP...............................................................................

Edit Remote PoE IP.............................................................................

GUI Connect.........................................................................................

Station and Status Window Select .......................................................

Configuration.........................................................................................

Factory Setting…………........................................................................

Board Status…………………………………………………………………

Port Status…………………………………………………………………...

GUI Version………………………………………………………………….

GUI Disconnect…………………………………………………………......

File Open and Save…………………………………………………………

5. Technical Specification........................................................

User’s Manual TP-MS308/TP-MS316/TP-MS324

1. Introduction

Mstronic’s family of Power over Ethernet TP-MS308/TP-MS316/TP-MS324 ( Power

Sourcing Equipment ), is an AC+DC input, gigabit PoE Midspan which injects power

over data-carrying Ethernet cabling. The TP-MS308/TP-MS316/TP-MS324, support 8,

16 and 24 ports respectively in a 10/100/1000BaseT Ethernet network, over

TIA/EIA-568 Category 5/5e/6 cabling. DC operating power, for data terminal units, is

fed over data pairs C (4/5) and D (7/8) of the cabling. Remote management of up to 8

units via TCP/IP protocol is featured, which allows greater flexibility in the locating of

network devices and significantly decreasing installation costs in many cases.

The TP-MS308/TP-MS316/TP-MS324 follows the IEEE 802.3af standard and is

completely compatible with existing Ethernet switches and networked devices. This

device normally powers PDs (Powered Devices) that are Power over Ethernet enabled

or are equipped to receive power over Ethernet. The PSE tests whether a networked

device is PoE-capable and power is never transmitted unless a Powered Device is at

other end of the cable. It also continues to monitor the channel. If the Powered Device

does not draw a minimum current, because it has been unplugged or physically turned

off, the PSE shuts down the power to that port. Devices which are not equipped to

receive power over Ethernet may require an external splitter in order to be powered.

Contact Mstronic for such a splitter.

Features

8/16/24 port Power Sourcing Equipment (PoE midspan)

Support 8/16/24 ports full load, max. 134W/268W/403W

IEEE802.3af compliance

Remote power feeding of Ethernet terminals up to 100 meters

Auto detect PD, and support manual detect PD

Centralized power distribution for PoE powered Device (PD)

Independent overload and short-circuit protection per channel

Supports IEEE 802.3af non-standard device

Auto refresh port status and support Plug and Play feature for PD

Standard 19” or 23”rack mountable

DIY upgrade from 8 port to 24 port available

Remote manage up to 8 units via TCP/IP protocol

DC input available, can work with battery, non-interrupt performance.

User’s Manual TP-MS308/TP-MS316/TP-MS324

Package Contents

Unpack the contents of the TP-MS308/TP-MS316/TP-MS324 and verify them

against the checklist below.

TP-MS308/TP-MS316/TP-MS324 x 1

Power Cord x 1

Bracket x 2 ( for 19”rack mounted)

CD-ROM x 1 (Software Utility + User Manual)

Compare the contents of your TP-MS308/TP-MS316/TP-MS324 package with the

standard checklist above. IF any item is missing or damaged, please contact your local

dealer for service.

2. Hardware Description

This Section mainly describes the hardware of the TP-MS308/TP-MS316/TP-MS324

and gives a physical and functional overview.

Physical Dimension

TP-MS308/TP-MS316/TP-MS324 physical dimension is: 430mm x 290mm x 44mm (Lx W x

H) (1U,19”or 23”Rack mountable)

Front Panel

Figure 2-1. The Front panel of TP-MS308/TP-MS316/TP-MS324

The Front Panel of the TP-MS308/TP-MS316/TP-MS324 consists of 8/16/24 x RJ-45

Ethernet ports (data), 8/16/24 x RJ-45 PoE ports (data + power), 8/16/24 x LED port

indicators, one LED power indicator and one RJ-45 remote control port (include one

LED).

User’s Manual TP-MS308/TP-MS316/TP-MS324

LED Indicators

The LED Indicators gives real-time information of systematic operation status. The

following table provides descriptions of LED status and their meaning.

LED

Status

Color

Description

RJ45

Green

A network device is

detected(10/100/1000 Mbps)

but no communication activity is

detected

Blinking

Green

The Ethernet port is transmitting

to, or receiving package from

another device

Off

No device is detected

Power

Green

Power feeding normally

Red

Power or fan alarm

Off

Power off

Ports

Green

Power feeding

Blinking

Orange

Detecting

Orange

The port has been shutdown

No power feeding

Red

Alarm

No power feeding

Off

Unknown device attached

No power feeding

Table 2-1. The Description of LED Indicators

User’s Manual TP-MS308/TP-MS316/TP-MS324

Rear Panel

Figure 2-2. The Rear Panel of TP-MS308/TP-MS316/TP-MS324

The AC inlet, DC input terminal and 2 Ventilation fan are located at the rear panel of

the TP-MS308/TP-MS316/TP-MS324. The device will work with AC in the range

100-240V AC, 50-60Hz. Or work with DC -48V(-42V~-57V).

Power On

Connect the power cord to the power socket on the rear panel of the PSE. The other

side of power cord connects to the power outlet. The internal power supply of the PSE

works with the voltage range of 100V-240VAC, frequency 50~60Hz, or with voltage

range of DC -42V~-57V. Check the port, the power indicator will self-test on the front

panel to see if power is properly supplied.

Network Application

The PSE can provide power to the PD which follow the IEEE 802.3af standard in the

network. It can solve the problem of position limitation. The network device can be

installed in a more appropriate position for better performance. The following figure is

an example of a network application for PSE

User’s Manual TP-MS308/TP-MS316/TP-MS324

RJ-45 Remote Control Port

TP-MS308/TP-MS316/TP-MS324 can remotely manage the PoE via the network. To

manage TP-MS308/TP-MS316/TP-MS324, you must to set the

TP-MS308/TP-MS316/TP-MS324 TCP/IP parameter.

TP-MS308/TP-MS316/TP-MS324 allowed you to use a standard Web-browser such as

Microsoft Internet Explorer or Mozila, to set the TCP/IP parameter.

Before you use the web interface to set the PoE TCP/IP, verify that

TP-MS308/TP-MS316/TP-MS324 is properly installed on your network and PC on the

network can access PoE via the web-browser.

1. Verify that PC network interface card (NIC) is operational on the TCP/IP protocol.

2. Supply power to TP-MS308/TP-MS316/TP-MS324.

3. Use RJ45 cable, connect TP-MS308/TP-MS316/TP-MS324 direct to your PC.

4. Make sure the TP-MS308/TP-MS316/TP-MS324 default IP is 192.168.1.10.

5. Set your PC IP to 192.168.1.2 or other IP address which is located in the

192.168.1.x subnet.

6. Make sure the connector is OK (Ping 192.168.1.10 on the DOS mode).

7 Start the web-browser and type http://192.168.1.10 (or used PoE IP setting icon in

the PoE management software).

8. The login in screen will appear next.

User’s Manual TP-MS308/TP-MS316/TP-MS324

9. Key in ID (user name) and password to enter PoE TCP/IP parameter setting. Default

ID and password is admin and system.

10. TP-MS308/TP-MS316/TP-MS324 TCP/IP parameter has 4 pages interface

(administrator setting, TCP Mode, UDP Mode and UART). You must change the

administrator & TCP mode to fit your network.

User’s Manual TP-MS308/TP-MS316/TP-MS324

11. Administrator setting: you can assign nickname, IP setting, user name, password and

view system information.

Nickname: You can assign a name to the device.

IP Address: You must assign the IP address reserved by your network. The default IP

is 192.168.1.10.

Subnet Mask: You can assign the subnet mask for the IP address. The default subnet

mask is 255.255.255.0.

Gateway: You can assign the gateway here. The default gateway is 192.168.1.1.

IP Configure: You must assign to Static for PoE serve operation. The default IP

configure is Static.

Username: You can assign new user name. The default setting is admin.

Password/Confirm: You can type in new password here. The default setting is system.

When you have finished the set up, click on Update to update your setting.

User’s Manual TP-MS308/TP-MS316/TP-MS324

12. TCP Mode: You can update the TCP control parameter here.

Telnet Server/Client: Set to Server for PoE management operation.

Port Number: You can assign port number for TCP/IP operation. The default Port

Number is 23.

Remote Server IP Address: Unused.

Clint mode inactive timeout: Unused.

Server mode protect timeout: Set to 0(Disable) for normal operation.

When you have finished the set up, click on Update to update your setting.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tycon Power Systems Netzwerk-Hardware Handbücher

Tycon Power Systems

Tycon Power Systems EZ-BridgeLT-HD Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung