TypeS AC56794 Bedienungsanleitung
JUMP STARTER
& Portable Power Bank with Wireless Charging
ITM. / ART. # 1279003
WP ITM. AC56794
AC56794F-120
User Manual
2
PACKAGE CONTENTS:
Power Bank
USB Cable and Car Adaptor User Manual
Storage Case
Jumper Cable with
Smart & Safe Protection
3
143 × 79 × 30 mm (5.62 × 3.11 × 1.18 in)
0.80 lbs (364 g)
Lithium-Ion
Up to 8000 mAh (3.7V)
29.6 Wh
5V 2A
5W
5V 2.4A
9V 2A / 5V 2.6A
200A - 350A
-20ºC ~ 34ºC (-4ºF ~ 93ºF)
-20ºC ~ 40ºC (-4ºF ~ 104ºF) Avg. Temp.
0ºC ~ 40ºC (32ºF ~ 104ºF)
4-5 hours
Product Dimensions:
Product Weight:
Internal Battery:
Capacity:
Watt Hours:
Input Voltage:
Qi/Wireless Charging Rating:
USB-A Output Voltage:
USB-C Output Voltage:
Jump Start Current:
Operating Temperature:
Storage Temperature:
Charging Temperature:
Charging Time:
TECHNICAL SPECIFICATIONS:
Power Level
Indicator Lights
Jump Start Socket
USB 5V Output
LED Flashlight/
Strobe Light/ Hazard Light
USB Type-C 9V / 5V Output
5V 2A Input
Polarity
Protection
Circuit
Power / Flashlight Button
Press Once - Power On /Power indicator
Press & Hold 3 Seconds - Turn on ashlight
Press Again - Strobe light
Press Again - Hazard light
Wireless
Charging Pad
Wireless charging
feature only works
on devices with the
wireless charging
option.
4
Press the power button to check the capacity of the Jump Starter.
When charging, the indicator lights will ash one by one. The
number of solid lights indicates the battery capacity. When all the
indicator lights are solid then the
Jump Starter
is fully charged.
Indicator Lights: 1 Flashing 1 Solid 2 Solid 3 Solid 4 Solid
Battery Capacity: Below 5% 5-25% 26-50% 51-76%
76% - Full
POWER LEVEL INDICATOR LIGHTS:
CHARGING THE JUMP STARTER:
At home:
1. Plug the USB cable into computer or any USB 2A wall
adaptor (not included).
2. Connect the micro USB cable onto the
Jump Starter
.
In Car:
1. Plug the USB car adaptor (included) into an available 12V
socket.
2. Connect the micro USB cable onto the
Jump Starter
.
NOTE: In order to reduce
the risk of re or electric
shock, an adapter shall
be chosen that is suitable
for the application and
is certied as a Class 2
or LPS power supply or
power adapter.
NOTE: Please fully charge the Jump Starter when you rst
receive the unit. It is recommended to recharge the Jump Starter
every 2-3 months and after every use to maintain the efciency
and prolong the service life of the internal battery.
5
Use the original manufacturer’s USB cable that came with your
device and plug into one of the USB output ports. You can use
both USB ports to charge two devices at the same time. One
of the ports is a Type-C socket, which has a maximum output
of 2A at 9V and 2.6A at 5V. The other
has a maximum output of 2.4A. Press
the power button once to begin charging
your device. The power level indicator
will show the battery level and will turn off
after 30 seconds.
To check the power capacity again, simply press the power
button once.
Press the power button once to enable
wireless charging function. Place the device
on top of wireless charging icon to start. You
may need to adjust the orientation to have the
best charging.
NOTE: The wireless charging feature only works on devices
that allow Qi (inductive) wireless charging. Only use the
wireless charging pad with Qi-certied devices.
CHARGING YOUR USB DEVICES:
WIRELESSLY CHARGING YOUR DEVICES:
Green Indicator Light Status Meaning
Solid Standby
Fading Wireless charging mode on
Flashing Abnormal object on charging zone
6
1. Press the power button on the
Jump Starter
once and check
that the power level indicator is 3 solid lights (51%) or higher.
2. Take
the BLUE end of the jumper
cable and plug it into the power
bank jump start socket which is
located underneath the black cover.
3. Connect the RED clamp to the
POSITIVE (+) post on the car
battery. The POSITIVE battery
post will be slightly larger than
the NEGATIVE post, and will be
marked with a PLUS (+) sign.
There may also be a RED plastic
protective cover over the positive battery post.
JUMP STARTING:
Black
Red
Black
Red
To jump start the vehicle battery, put the vehicle
in park (neutral if the vehicle has a manual
transmission) and engage the emergency brake.
Locate the battery for the vehicle and follow the
steps listed below.
Jumper cables are color coded, RED for
POSITIVE (+) and BLACK for NEGATIVE (-).
DO NOT mix up the cables or allow the metal
ends to touch together because this may damage the battery,
charging system and/or electronics on a vehicle.
Black
Red
7
JUMP STARTING CONT.:
4. Connect the BLACK clamp to the NEGATIVE (-) post
on the car battery. The NEGATIVE will be marked with
a MINUS (-) sign. There may also be a BLACK plastic
protective cover over the negative battery post.
NOTE: Do not connect the RED clamp (+) and the BLACK
clamp (-) at the same time. Connect the RED clamp rst, then
the BLACK clamp.
CAUTION: DO NOT lean directly over the battery
while making jumper connections.
5. Check the LED status on the indicator
light box located on the jumper cable.
Proceed to the next step unless the light
is ashing RED and BEEPING.
Please reference the LED status chart on page 9 if needed.
6. You now have 90 seconds to start your vehicle before the
jump starter times out to prevent the vehicle battery from
reverse charging the unit. If it does not crank or cranks very
slowly, wiggle the jumper connections to make sure they are
making good contact. Wait 60 seconds before trying to
start your car again. Each new jump start attempt requires
disconnection of both clamps from the car battery and
reconnection. The engine should start if there are no other
problems (such as a bad starter or ignition circuit problem).
Do not attempt to jump start the vehicle more than 3 times
with the Jump Starter. If the vehicle fails to start after 3
attempts, it is likely due to alternative reasons and should be
checked by an auto mechanic.
Indicator
Box
8
7. As soon as the engine starts, the indicator box on the
BLACK clamp will blink red and beep to let you know it is ok
to disconnect.
8. Please disconnect the jumper cables from your car within 30
seconds. First remove the RED/POSITIVE (+) clamp and
then the BLACK/NEGATIVE (-) clamp.
9.
Do not allow the metal ends of the jumper cables to touch each
other or the
RED
clamp to touch anything metal on the car.
Now unplug the
BLUE
end of the jumper cable from the
jump starter. This will reset the jumper cable. In 90
seconds the jump starter will power off automatically.
10. Keep the engine running for 20 to 30 minutes, or drive
the car to recharge the battery.
NOTE: If the engine dies shortly after it has been jump started,
or as soon as the jumper cables are disconnected, it probably
means the vehicle charging system is not working (bad alternator,
voltage regulator, wiring problem, or loose/dirty battery cables).
Please seek professional help from an auto mechanic to nd the
root cause of the problem.
The Jump Starter may not work correctly for vehicles that require
remote battery jumper locations (e.g.: battery located in trunk
or other location). Please consult the owner’s manual for your
vehicle.
JUMP STARTING CONT.:
9
JUMP STARTING CONT.:
Polarity Protection Circuit Status
Solid LED On Flashing LED LED Off
Status (Light & Sound Indicator)
Status Meaning:
Red Light Green Light Sound
None The car battery is ready for jump start.
None The Jump Starter needs to be charged.
None The car battery is ready for jump start. If
the indicator doesn’t turn solid Green, the
car battery voltage is higher than the jump
starter. You can still jump start your battery,
but may need to charge your jump starter.
Beeping Disconnect the jumper cable from the car
battery and jump starter. Either the car jump
start is complete or there is a connection
problem.
None This status shows after 30 seconds time out.
Disconnect the jumper cable from the car
battery and jump starter to reset. Reconnect
the jumper cable to jump start the vehicle.
None Please contact Winplus for troubleshooting.
LED Light
Flashlight Press and hold the power button for three seconds.
Strobe Light Press once while in ashlight mode
Hazard Light Press once while in strobe light mode
Turn Off Press and hold the power button for three seconds.
10
• Always wear safety glasses when jump starting a battery (to protect
your eyes), and gloves when handling a battery (to protect your hands).
• When jump starting a vehicle please ensure that the blue plug is
securely tted into the jump start socket on the jump starter.
• Ensure the battery clamps are connected correctly, and the connectors
are free from rust and dirt.
• Do not allow this product to become wet. Exposure to excessive moisture
will damage the unit.
• Do not immerse the product in water.
• Do not operate the product in explosive atmospheres, such as in the
presence of ammable liquid, gas or dust.
• Do not modify or disassemble this product.
• Do not store in locations where the temperature may exceed 104ºF (40ºC).
• Charge only using the charger provided.
• Under extreme heat conditions, battery leakage may occur. Avoid contact
with your skin. In case of skin or eye contact, rinse immediately with
clean water and seek medical attention.
• If battery leakage occurs, take it to your local battery recycling center for
disposal. Do not attempt to use.
• Do not place the jump starter on the oor, or at a height less than 18
inches (457mm) above the oor, during use in a repair facility.
• This car jump starter is for use with 12V vehicles only. Using on non-12V
vehicles may cause serious damage to the vehicle, jump starter, or injury
to the user. Refer to the owner’s manual for the vehicle if you are
uncertain what voltage the vehicle runs on.
BATTERY DISPOSAL
The battery is self-contained and not consumer replaceable. The battery
must be disposed of properly when it no longer holds a charge. Proper
charging practices will increase the life of the product. For information on
battery recycling, call toll-free 800-822-8837.
For information regarding air travel safety with batteries please check the
U.S. Department of Transportation prior to travel at:
http://phmsa.dot.gov/safetravel/batteries , or contact your airline if traveling
from a country outside the U.S.
Note: The Car Jump Starter contains the equivalent of 2.4g of lithium and
gives 29.6 watt hours of power.
INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
WARNING:
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere TypeS Fernstartsystem Handbücher
TypeS
TypeS AC533654 Bedienungsanleitung
TypeS
TypeS 1253313 Bedienungsanleitung
TypeS
TypeS AC532777 Bedienungsanleitung
TypeS
TypeS AC532632 Bedienungsanleitung
TypeS
TypeS AC532671 Bedienungsanleitung
TypeS
TypeS PROJUMP 26000 Bedienungsanleitung
TypeS
TypeS AC56789 Bedienungsanleitung
TypeS
TypeS PROJUMP 15000 Bedienungsanleitung
TypeS
TypeS AC530171 Bedienungsanleitung
TypeS
TypeS PROJUMP 18000 Bedienungsanleitung
